unless it’s simaudio, then it’s still the customer’s fault.I think you are mixing subjects. An initial defect when purchased from an authorized dealer in my experience is never an issue.
unless it’s simaudio, then it’s still the customer’s fault.I think you are mixing subjects. An initial defect when purchased from an authorized dealer in my experience is never an issue.
The Mcintosh amps and preamps I've owned have zero cost of ownership. I can sell them for more than I bought them for. To my knowledge no other brand has pulled this off. We don't talk about their Pre/Pros, whose values drop like a rock.This among many other reasons is why McIntosh has one of the best resale values of any manufacture. I have sold several pieces of gear over the years. The pieces that always seem to sell almost immediately are McIntosh.
I had a similar real world experience, but had superb support from the manufacturer.Resale of goods offers no value whatsoever to the manufacturer - despite whatever you may think. Let me give you a real world example:
Let’s assume a CD player manufacturer does allow the transfer of warranty. The original owner received it via freight - on a pallet. He then sells it to someone over the internet and ships it Fedex. The fedex sorting station has conveyor belts which always causes a tumbling of the box. The tumbling motion is destructive to the transport mechanism. The new owner gets it and it has issues loading the CD. He calls the manufacturer to repair under warranty. Fair? No.
The warranty is extended to the original purchaser only in many (most) cases.
If you want warranty, buy new. Otherwise you live with the tail light warranty in most cases.
I also had excellent experience with McIntosh customer service when a meter failed. They stand behind their products.I agree and will add that their quality and customer experience is critical to them. They understand this more so than any other company I have dealt with. I have previously related my experience with a now ex-dealer committing fraud on a new amplifier I ordered. They stepped in and went as far as having a dealer from three hours away drive to my home and install the amplifier (of course they compensated the dealer).
After a short time one of the meters was not acting right. It would not come on until the amp was warmed up. Not a huge deal, but McIntosh reply was telling. He said every piece new out of our factory we expect to be perfect. Anything but this is unacceptable for us. He arranged to send a new one to the dealer and paid them to bring it down to my home and exchange it in my rack for me.
They even followed up by sending me one of their gorgeous books on their history (not a cheap book), as their apologized for the issue I experienced. Yes, with this deal they made nothing, obviously. However, they benefited and I am sure gained a lot in the long run. I told the story to the president of the audio club I was in back in California. He was amazed and said his respect for McIntosh was off the charts after hearing this.
Wow.... how can he still be in business?No issues with McIntosh either. When my 901’s caught on fire (both of them!), I called McIntosh and they gave they sent me to a local repair place. They worked with them to get parts and a few months later, good as new!
My Richard Vandersteen story: when I was a Vandersteen dealer, I had a guy from Port Charlotte visit. He came in a big old GM suburban. He brought about 10 amps to try on the speakers. Well, some of them were 25-30 years old. With Vandersteen speakers, you have their goofy filter boxes and you have to know the output impedance of the amp, then open the stupid little box, and adjust the 1950 circa dip switches to match it to the impedance. Well, a few of his amps were so old, we couldn’t find any specs online. He had no manual or any idea. Google results didn’t provide any intel at all.
So, the next day, I called Richard and explained to him what happened. I asked, “in a pinch, can we just use a default setting. It won’t be perfect, but will work, like 100 ohms?”
Well…
He launches into this tirade “you fucking lazy mother fucking dealers. You lazy fuckers just want to sit there and do nothing….”
I politely said, “Richard, I don’t think this is going to work long term. I’m done representing your brand.”
So when people ask “why don’t you represent X any more?” It’s often stuff like this.
Life is too short to deal with ignorant fools.
I thought you were referring to Richard when you said "dip switch".No issues with McIntosh either. When my 901’s caught on fire (both of them!), I called McIntosh and they gave they sent me to a local repair place. They worked with them to get parts and a few months later, good as new!
My Richard Vandersteen story: when I was a Vandersteen dealer, I had a guy from Port Charlotte visit. He came in a big old GM suburban. He brought about 10 amps to try on the speakers. Well, some of them were 25-30 years old. With Vandersteen speakers, you have their goofy filter boxes and you have to know the output impedance of the amp, then open the stupid little box, and adjust the 1950 circa dip switches to match it to the impedance. Well, a few of his amps were so old, we couldn’t find any specs online. He had no manual or any idea. Google results didn’t provide any intel at all.
So, the next day, I called Richard and explained to him what happened. I asked, “in a pinch, can we just use a default setting. It won’t be perfect, but will work, like 100 ohms?”
Well…
He launches into this tirade “you fucking lazy mother fucking dealers. You lazy fuckers just want to sit there and do nothing….”
I politely said, “Richard, I don’t think this is going to work long term. I’m done representing your brand.”
So when people ask “why don’t you represent X any more?” It’s often stuff like this.
Life is too short to deal with ignorant fools.
I have another Vandersteen story where Richard was not necessarily completely to blame but nevertheless complicit.No issues with McIntosh either. When my 901’s caught on fire (both of them!), I called McIntosh and they gave they sent me to a local repair place. They worked with them to get parts and a few months later, good as new!
My Richard Vandersteen story: when I was a Vandersteen dealer, I had a guy from Port Charlotte visit. He came in a big old GM suburban. He brought about 10 amps to try on the speakers. Well, some of them were 25-30 years old. With Vandersteen speakers, you have their goofy filter boxes and you have to know the output impedance of the amp, then open the stupid little box, and adjust the 1950 circa dip switches to match it to the impedance. Well, a few of his amps were so old, we couldn’t find any specs online. He had no manual or any idea. Google results didn’t provide any intel at all.
So, the next day, I called Richard and explained to him what happened. I asked, “in a pinch, can we just use a default setting. It won’t be perfect, but will work, like 100 ohms?”
Well…
He launches into this tirade “you fucking lazy mother fucking dealers. You lazy fuckers just want to sit there and do nothing….”
I politely said, “Richard, I don’t think this is going to work long term. I’m done representing your brand.”
So when people ask “why don’t you represent X any more?” It’s often stuff like this.
Life is too short to deal with ignorant fools.
They probably did you a favor by causing you to go elsewhere.I have another Vandersteen story where Richard was not necessarily completely to blame but nevertheless complicit.
Sometime in the 90's my entire stereo system was stolen. I walked into a local dealer planning on spending my generous insurance check and adding cash to it. I was in the mood for a serious upgrade.Richard was talking to the store owner. They barely acknowledged my entrance. The store was empty. I wandered into each room in search of sonic bliss. I was in the store at least 20 minutes. Not one word from the owner. He and Richard shared a bromance while I languished.
I walked out without talking to anyone. I found another store where I bought an entire system. It became "my" store through many upgrades.