Kuoppis
New member
- Joined
- Jan 19, 2015
- Messages
- 5,203
- Thread Author
- #101
Hi, kuoppis,
I ve read the review of the nyquist fully and your review only complements and confirm it.
Really happy for you.
Can you please tell me if the nyquist could be used as a preamp feeding power amp directly.( balnced or unbalanced)?
I know a proper integrated or preamp will be much better, but i was thinking, may be as a start invest in nyquist, feed it with power amps ,then invest in a good preamp.
Thks
Sent from my iPhone using Tapatalk
Hi sksouri, thank you for the kind words. I think the guys at Brinkmann have done a tremendous job.
I have not tried it as I have a quite nice preamp. The Nyquist however has a 10-step gain attenuator, which could in principle work as a volume control. What I don’t know, is whether the attenuator is set to do 0-100% in ten steps, or whether the attenuator is set to do ten steps somewhere in the middle (e.g. 40-60%). And it has a volume control in the hp amp mode (99 steps if I remember correctly).
I might be able to try it when I get back home tomorrow and will report back.
Sent from my iPad using Tapatalk