Congrats Bob! I agree with Myles on the KT150's.
Try some KT 150s in the amps!![]()
Super !Oh hell, why wait? I went ahead and ordered up a quad of KT150s. Bring on the sonic bliss!
Show off :happy:
Oh hell, why wait? I went ahead and ordered up a quad of KT150s. Bring on the sonic bliss!
The Wilson dealer came on Sunday and spent six hours WASPing the Alexias. They are pretty close to the back wall, much more than I would have imagined. And the tweeters are 12.25' apart, which has my listening position about 15' back. I had some older, broken in REF gear for the setup, then just swapped in my new REF10 and REF75 yesterday. I found new positions for them today, and they now have 4 hours.
I spent a couple hours listening tonight in the almost darkness, with the meters turned off. That little REF75 is quite the amp. It drives the Alexias fine. And the room sounds quite good even with only the tube traps in the corner. If I run the volume up into the 90+ db range I hear things getting a little reverberant and confused with rock and orchestra, so there is some work to be done acoustically, but not so much I am not enjoying the hell out of having music again. (And tonight with a nice little Italian red! Wine that is!)
Sent from my iPad using Tapatalk HD
Excellent Mike, thanks. I'll download that app. Did you use a specific test source with that tool?
Bob - do you have a spectrum analyzer that you can use to monitor the peeks of the specific frequencies? If not, I use this one on my iPhone for a quick and dirty analysis. (See below). You may want to get it, put it on the FFT plot mode and have a look. You want to identify where the specific peek(s) are in your room. Mine was 73hz. Above 90db excite which frequencies in your room?
View attachment 8319
Sent from my iPhone using Tapatalk
Can't put anything past these eagle eyes!
That wine club membership sounds awesome!!!
I thought the thing that was missing was a turntable. Screw the wine!![]()
Excellent Mike, thanks. I'll download that app. Did you use a specific test source with that tool?