Help with ohm setting

Petro85

New member
Joined
Apr 12, 2013
Messages
2,425
Location
NJ
I'm wondering what the difference in these 2 settings on the back of my snappers is.
Really same sound quality, same volume position. I just listened to the same record on each position without touching anything else.
I can't tell a difference except one says xlr input z and one just says 15k.
e7ypyrag.jpg

qebe6ery.jpg



Sent from my iPhone using Tapatalk
 
RCA AND XLR INPUTS
Choice of unbalanced [single-ended] RCA or balanced XLR input signal formats are made convenient by the use of two discrete jacks at the rear of the amplifier. The amplifier does not invert the unbalanced input signal, and is wired for the now more popular pin-2-high XLR convention. Pin 1 = Ground, Pin 2 = High(+), Pin 3 = Low(-)
An adjacent toggle switch facilitates choice of input signal format, permitting instantaneous selection of either the RCA or XLR input. **NOTE** The following feature was removed in July of 2008. However, it is present on units numbered up to and including MSN524: The balanced XLR input of these units also features an input termination switch. When engaged, the termination switch lowers the balanced input impedance of the amplifier from approximately 15Kohms to 600 ohms. Use of this resistive 600 ohm termination is only suggested when using the SNAPPER with balanced signal sources whose output signals are transformer-coupled to the balanced line. Proper line termination often helps in wheedling the best behavior from such sources.
Unbalanced input drive voltages of 750 millivolts RMS into the RCA jacks or 1.5V RMS into the XLR balanced inputs will produce full output power.
 
Thanks two times Joe. I guess I should have read the entire manual. Lol
I just thought maybe it was broke since I could not hear any difference.
Thx
 
Lol!!!!! Thanks Bob I got a few left to catch up to you and joe.
 
Steve, congrats on the 1K!:peace:

Looks like Joe got you the info.:scholar:
 
I'll just keep resetting your post count so you can never leave :)
Bet you don't, if you do the next time i'm in ny I'll buy you a katz samwage....
You won't find any better anywhere else. ...I know I've been at most of them. :)
Gonna find one you haven't been Bob!Never know, might go back to the Forrest & Lt show as Bubba Gump! now theres a laugh, someone could log in under BubbaGump :rofl:
 
Back
Top