Conrad Johnson LM - 200 speakers
- Thread starter iRon
- Start date
Mr Peabody
Well-known member
First I even knew CJ made a speaker.
Typically, one set of binding posts is for highs and another set for lows. They should be marked by +/- or red/black. Hook a speaker cable from amp to speaker keeping black to back and red to red (- to - etc.) There should be jumpers to go from one set of posts of the speaker to the other or you could use any jumper, like a short speaker cable.
If you have two outputs on your amp or two amps you can hook one set to the speaker's highs and another to the lows.
Hope this makes sense.
Typically, one set of binding posts is for highs and another set for lows. They should be marked by +/- or red/black. Hook a speaker cable from amp to speaker keeping black to back and red to red (- to - etc.) There should be jumpers to go from one set of posts of the speaker to the other or you could use any jumper, like a short speaker cable.
If you have two outputs on your amp or two amps you can hook one set to the speaker's highs and another to the lows.
Hope this makes sense.
- Thread Author
- #3
thank you!...
What ?!?!?! C-J has speakers? Cool.
I’ll have to check their website. Are those current models or vintage?- Thread Author
- #5
VINTAGE...they were partnered with David FokosWhat ?!?!?! C-J has speakers? Cool.
SYNTHESIS LM300Speaker
**Features10-inchwoofer;5-inchidrange;1-inchdome
tweeter.Frequencyresponse30-20,000Hz 2dB;
min power 10 W; max power 100 W;
impedance8ohms;oak finish with black grille;17' (and included a 2nd pair of Beige Grill covers)
W 44"H 17"D;70lbs**
my son is also claiming my
Conrad Johnson Synthesis SRS speakers (photo of the 4 speaker set) as well as my LM 300 speakers, in black below...(i didn't realize because outwardly, they looked the same as the LM-200 - my bad)
ASIDE:
i ALSO bought their last pair of the SRS Speakers directly from the factory warehouse in Fairfax, Va., (just a few miles from my home) way back when...so smooth...no listening fatigue...
copy & paste from AI query: (sorry, i can't reformat size and bolding)
this represents the speakers well.
Overview of Conrad Johnson Synthesis SRS Speakers
The Conrad Johnson Synthesis SRS speakers are a highly regarded vintage speaker system from the 1980s–1990s era. These are not standalone speakers but rather a complete reference system that consists of four components: two subwoofer towers, two main speakers, and an active crossover.
System ConfigurationComponent | Details |
| Subwoofer Towers | Two towers (~6 feet tall each) per channel, each housing custom-designed woofers built for Conrad Johnson by a Chicago manufacturer |
| Main Speakers | Mid-sized, sleek high-frequency speaker cabinets with Dynaudio D28 A/F tweeters and Focal 7" midrange drivers |
| Active Crossover | Required component that splits the signal from your preamp into separate high-frequency and low-frequency outputs for biamplification |
| Woofer Specifications | Custom drivers solid to 22 Hz with fast response suitable for blending with electrostatics; approximately 89 dB sensitivity at 1W/1m |
Sound CharacteristicsThe Synthesis SRS system is praised for its neutral, smooth, and liquid sound signature. Key attributes include:
- Bass Performance: Excellent deep bass extension to around 23 Hz (3 dB down), with fast, tight, responsive woofers that integrate seamlessly with the midrange and treble
- Midrange: Described as liquid and natural, with impressive detail retrieval and musicality
- Treble: Crystal clear highs without harshness
- Soundstage: Wide, spacious soundstage with excellent 3D imaging when positioned properly (at least 2–3 feet from the back wall)
- Overall Presentation: Smooth, coherent, and non-fatiguing, even with less-than-perfect source material
Amplification & ImpedanceThe Synthesis SRS speakers are very easy to drive with moderate impedance. According to vintage audio dealers and owners:
- Rated for approximately 100 watts, though they perform well with less powerful amplifiers
- Designed and voiced for Conrad Johnson tube amplifiers, though they work with quality solid-state gear as well
- Owners have successfully used them with Conrad Johnson amps like the MV-50, Premier 350, and other tube equipment
- They can also be driven by quality receivers and amplifiers from other manufacturers
Original MSRP & RarityThe system had an original MSRP of approximately $12,995 (a substantial investment for the era), making them a true statement-level speaker system. They are extremely rare on the used market and difficult to find intact.
Attachments
Last edited: