Darrel
Member
That was the first turntable I owned. I used a Shure V15 type 2 cartridge. I really enjoyed using and listening to my early system with it. Enjoy!
What's your next purchase?
- Thread starter Michaels HiFi
- Start date
That was the first turntable I owned. I used a Shure V15 type 2 cartridge. I really enjoyed using and listening to my early system with it. Enjoy!
Shadowfax
Well-known member
I sold it yesterday
Darrel
Member
so what does a 50 year old tt go for these days?
Once upon a time long, long ago I had a Dual 1229 and a Shure V15 type 2 cartridge. I also had a cartridge for Quadraphonic--that was a short side road that dead ended. I also had a Marantz 4430 Quad receiver. It had a Vari-Matrix feature for "converting" stereo to Quad. I actually liked that feature and kept it for some time till I gifted to godson.
Shadowfax
Well-known member
It went for $200 but after a cleaning and lube job, they go for $300+
CPP
Active member
"" I had a Dual 1229 and a Shure V15 type 2 cartridge."" , same here, mine was connected to a Marantz 2270. The 2270 is in storage.
Mr Peabody
Well-known member
CPP
Active member
Oh I know, believe I know. :happy:
Audioseduction
Active member
I just built a $4700 Gaming PC.
Dizzie
Well-known member
Waiting for this to be built and installed. My door is the same color as the one in the picture. My stucco trim is a very close match brown color. The "screen" portion is actually a solid sheet with laser holes. I am not concerned about the security aspect as much as the lower visibility into my home compared with a mesh-type screen when the main door is open. My entrance door is 8' tall and 52' directly opposite my patio door. We frequently get a cool evening (Delta) breeze and that is the main reason I spent >$3400 for the door. A few years ago the same door would have been <$2000 installed. Installer kept blaming the supplier. That does not pass my smell test.
mep
Well-known member
- Joined
- Dec 4, 2013
- Messages
- 5,101
What MB, CPU, and RAM did you use?
Audioseduction
Active member
MB - ASUS ROG Maximus Z790 Hero (WiFi 6E) LGA 1700(Intel®13th&12th Gen) ATX Gaming Motherboard
CPU - Intel Core i9-13900K Processor
RAM - CORSAIR VENGEANCE RGB DDR5 RAM 64GB (2x32GB) 6400MHz RAM
Power Supply - Corsair HX1500i, HXi Series, 80 PLUS Platinum Fully Modular Ultra-Low Noise ATX Digital Power Supply
Drives - 2 SAMSUNG 980 PRO SSD 2TB PCIe NVMe Gen 4 Gaming M.2 Internal Solid State Drive Memory Card
GPU - ASUS ROG Strix GeForce RTX 4090 24GB OC Edition Gaming Graphics Card
CPU Cooler - ASUS ROG RYUO III 360 ARGB All-in-one AIO Liquid CPU Cooler 360mm Radiator
Vintage_Tube
Member
Day Care: post 3.
Have an order in w/my dealer & Kevin @ VAC for a pair of their 450iQ monos and a Master Preamp (less phono). Should be driving down late September for pickup. Not too far off. I'm rather patient; but stoked at the same time.:exciting: My Odin P/C's are arriving back from Nordost tomorrow after C19 to C15 retermination (so, I'll be ready).
Have ordered 2 HRX M3X2-1921's Isolation Bases with their G7 footers and G-Links for the amps (they can't be in my existing rack). While at HRX, ordered a 1.3" DPX-14545-S Damping Plate for the dCS Transport. I'm about out of checks :snicker:
Have an order in w/my dealer & Kevin @ VAC for a pair of their 450iQ monos and a Master Preamp (less phono). Should be driving down late September for pickup. Not too far off. I'm rather patient; but stoked at the same time.:exciting: My Odin P/C's are arriving back from Nordost tomorrow after C19 to C15 retermination (so, I'll be ready).
Have ordered 2 HRX M3X2-1921's Isolation Bases with their G7 footers and G-Links for the amps (they can't be in my existing rack). While at HRX, ordered a 1.3" DPX-14545-S Damping Plate for the dCS Transport. I'm about out of checks :snicker: