Lumin T2 " louder " than D2 on RCA Outputs ?

H

Happajoe

New member
Joined
Jan 8, 2021
Messages
6
Location
Germany
Hey there :-)
So far I had connected a Lumin T2 to my tube power amplifier via the RCA output.
I have had the T2 here since today. I have to turn the T2 down with the same settings. For example from 42 to 34 in the Lumin app. Leedh Processing is activated.

It is possible to set the analog output "quieter" in the setup. Does that have any effects on the sound?

many Greetings
Christian
 
Welcome to the forum. According to the specifications the analog outputs are not identical. The D2 outputs 2v from the RCA outputs and the T2 3v. For balanced outputs the D2 is 4v vs. the T2 6v.
 
X1 / T2 is 3.5dB louder than S1 / A1 / T1 / D1 / D2.

Please set Analog Output Level to Low if you find it too loud. There is no difference between setting Normal and Low if the effective output volume are the same by adjusting the volume. With Low you get more levels to use in the volume scale, therefore it allows for more precise adjustment.
 
You must log in or register to reply here.
Back
Top