Integrated with USB

Mike

Audioshark
Staff member
Joined
Apr 2, 2013
Messages
30,361
Location
Sarasota, FL
I'm looking for a killer Integrated Amp (probably Class-D to get most bang for the buck and small footprint) and must have a 24/192 USB DAC built into it. I'd like to get some suggestions/ideas.

Budget would be ideally below $3,000.

I will be pairing it with these:

» MMMicroOne

I'm considering the Bel Canto c7r as one option.

MMMicroOne


The Evolution Acoustics MMMicroOne loudspeakers are designed and engineered in the USA, comprised entirely of custom tooled components with absolutely no “off the shelf” parts. All aspects of these loudspeakers are painstakingly researched and analyzed to produce incredible micro and macro dynamic performance as well as the highest level of clarity in the industry. Only the finest parts are used throughout including reference grade film foil capacitors, oversized high purity copper air core inductors, ultra high current wire wound precision resistors, and individually insulated multiple conductor solid core copper wiring. All of these parts are hand matched and soldered in our constant voltage crossover networks on heavy gauge printed circuit boards which are then immersed in epoxy resin to eliminate unwanted micro-phonics.


Clarity and dynamics are achieved through the use of Evolution Acoustics’ very own ultra high quality Pleated Diaphragm Air Velocity (PDAV) tweeters and Ceramic Matrix (CMAT) mid-woofer drive units. These components are housed in advanced acoustic cabinetry, which is both structurally inert and sonically diffuse through the use of multiple layer construction. Because the layers are individually bonded by an adhesive compound, the cabinet walls have superior strength. In addition the French curve profile helps to significantly reduce internal back wave reflections from the transducers. Although compact in size, the glue laminated and double braced 25mm curved side walls, 50mm baffles and 50mm top and bottom plates, all combine to create a dense and heavy monitor capable of world class performance. You will also enjoy the beauty of these speakers as they are hand finished with multiple polished layers to produce a deep high gloss shine. Combine all of these elements with an engineering target that is both time and phase aligned and you have one remarkable speaker system.
 
Last edited by a moderator:
Well, these are great little units but they don't have async USB as they are network players. But that might work even better depending on exactly what you are trying to do. Both do have an USB input but it's for a USB drive.

Naim UnitiQute 2 is $2,195 30w/channel and the Naim UnitiLite is $3,000 50w/channel and it has a cd player built it also.
 
Well, these are great little units but they don't have async USB as they are network players. But that might work even better depending on exactly what you are trying to do. Both do have an USB input but it's for a USB drive.

Naim UnitiQute 2 is $2,195 30w/channel and the Naim UnitiLite is $3,000 50w/channel and it has a cd player built it also.

Thanks Jock. This is very interesting.

unitilite2.jpg
 
Since the TAD's are your avatar, does this mean your on again off again relationship is "on" today?

Yes Sir. I hooked them up immediately after having the SF Evos playing. No other changes but speakers. Holy cow what a difference. Talk about opposites. They really are pretty amazing in a different way than the Evos. I honestly think I will miss the TADs if I sell them. The plan has changed a little.
 
Last edited:
[h=1]W4S Mini-Integrated (mINT)[/h]

Featuring a built in DAC, headphone amp, remote control and outputting 100wpc into 8 ohms!

Now Shipping!Orders are shipped within 2-3 business daysMini-Integrated amplifier 100wpc
This compact integrated amplifier is a very versatile unit that will fit well in many systems for years to come. Extensive amounts of time and engineering have been applied to produce remarkable performance and a noteworthy feature set in a chassis smaller than the average DAC.
The transparent nature of a Wyred 4 Sound product is able to reproduce your favorite recording with an abundance of detail and clarity. The internal circuits and components are carefully selected and designed to reproduce this W4S sonic signature. Nothing is better than having colorless power behind your music!
We understand that there are many other products on the market which have similar features and internal parts. It is important to understand that it is what you do with those parts and the circuits around them to define the products performance, sonics and uniqueness. We design and manufacture our products in the USA yet still offer value comparable to those produced in regions where manufacturing is much less costly. Aside from great sonic performance, our build quality and customer service are on the top of our priority list.


There are many reasons why this mini integrated amplifier is unique. To start with, the volume control in the mINT is a true-resistive ladder which results in linear control, excellent channel matching, and impressive sonic quality. It was no simple task to attain these qualities using the one-turn analog pot on the mINT, so it was necessary to step outside of the box. Rather than passing the signal through the pot, it is only used as a position reference. A soft ramp feature means that when powering the unit on/off or using the mute/un-mute it increases/decreases the volume at a pleasant rate. The mINT has a 12V DC trigger in and out as well as an external mains voltage switch.
Two analog inputs (Auxiliary 1 and 2) are side by side on the rear panel. An alternate function of Aux 2 is HT bypass (Home Theater bypass) and is activated via a push switch on the back. When HT is selected, the trigger in becomes one activation point for the HT mode. Aux Out (preamp output) will work very well to incorporate a powered subwoofer. In addition to the pre-out the mINT has a Fixed out that will typically be used to send a signal to a recording device or feed a signal to a second system. An alternate function of the Fixed out is a Main In feature that can be used with the preamp output to allow the insertion of a digital crossover into the signal path. This feature can be selected by the “Fixed out/Main in” button located on the rear of the unit next to the HT Bypass selector.
Located top and center of the rear panel, you will find three digital inputs powered by an ESS DAC chip for an incredible experience when streaming your digital recordings. The S/PDIF inputs will support 24 bit 192kHz resolution files and the asynchronous USB interface will support 24 bit 96kHz resolution files. Each digital input can be connected to a different source and selected independently via the remote or input select buttons on the front.
A ¼” headphone jack is machined into the left had side of the front panel. When a headphone plug is inserted into the jack it will mute the other outputs (other than the Fixed outputs) regardless of the input selected or volume level. The performance of the built-in headphone amp is nothing short of impressive. Independent power supplies for exceptionally low channel crosstalk, low noise and an abundance of dynamic range make for true hi fidelity headphone experience.
Did you think we were done, Ha!, now the most important part! The final area of focus is the source of on-board amplification, after all it is an integrated amplifier! Utilizing two independent ICEpower™ modules, the mINT is capable of outputting 100wpc into 8 ohms and will drive the majority of speakers on the market with ease.
mini-Integrated SpecificationsCompact size!Covered by a 5 YEAR WARRANTY (Original Purchaser)8"x 8"x 3.5"


[SUP]Product Code:[/SUP]mINT

[TD="class: productPricePrompt"][SUP]Price:[/SUP][/TD]
[TD="class: productPricePrice"]US$ 1,499.00 ea[/TD]
 
[h=1]W4S Mini-Integrated (mINT)[/h]

Featuring a built in DAC, headphone amp, remote control and outputting 100wpc into 8 ohms!

Now Shipping!Orders are shipped within 2-3 business daysMini-Integrated amplifier 100wpc
This compact integrated amplifier is a very versatile unit that will fit well in many systems for years to come. Extensive amounts of time and engineering have been applied to produce remarkable performance and a noteworthy feature set in a chassis smaller than the average DAC.
The transparent nature of a Wyred 4 Sound product is able to reproduce your favorite recording with an abundance of detail and clarity. The internal circuits and components are carefully selected and designed to reproduce this W4S sonic signature. Nothing is better than having colorless power behind your music!
We understand that there are many other products on the market which have similar features and internal parts. It is important to understand that it is what you do with those parts and the circuits around them to define the products performance, sonics and uniqueness. We design and manufacture our products in the USA yet still offer value comparable to those produced in regions where manufacturing is much less costly. Aside from great sonic performance, our build quality and customer service are on the top of our priority list.


There are many reasons why this mini integrated amplifier is unique. To start with, the volume control in the mINT is a true-resistive ladder which results in linear control, excellent channel matching, and impressive sonic quality. It was no simple task to attain these qualities using the one-turn analog pot on the mINT, so it was necessary to step outside of the box. Rather than passing the signal through the pot, it is only used as a position reference. A soft ramp feature means that when powering the unit on/off or using the mute/un-mute it increases/decreases the volume at a pleasant rate. The mINT has a 12V DC trigger in and out as well as an external mains voltage switch.
Two analog inputs (Auxiliary 1 and 2) are side by side on the rear panel. An alternate function of Aux 2 is HT bypass (Home Theater bypass) and is activated via a push switch on the back. When HT is selected, the trigger in becomes one activation point for the HT mode. Aux Out (preamp output) will work very well to incorporate a powered subwoofer. In addition to the pre-out the mINT has a Fixed out that will typically be used to send a signal to a recording device or feed a signal to a second system. An alternate function of the Fixed out is a Main In feature that can be used with the preamp output to allow the insertion of a digital crossover into the signal path. This feature can be selected by the “Fixed out/Main in” button located on the rear of the unit next to the HT Bypass selector.
Located top and center of the rear panel, you will find three digital inputs powered by an ESS DAC chip for an incredible experience when streaming your digital recordings. The S/PDIF inputs will support 24 bit 192kHz resolution files and the asynchronous USB interface will support 24 bit 96kHz resolution files. Each digital input can be connected to a different source and selected independently via the remote or input select buttons on the front.
A ¼” headphone jack is machined into the left had side of the front panel. When a headphone plug is inserted into the jack it will mute the other outputs (other than the Fixed outputs) regardless of the input selected or volume level. The performance of the built-in headphone amp is nothing short of impressive. Independent power supplies for exceptionally low channel crosstalk, low noise and an abundance of dynamic range make for true hi fidelity headphone experience.
Did you think we were done, Ha!, now the most important part! The final area of focus is the source of on-board amplification, after all it is an integrated amplifier! Utilizing two independent ICEpower™ modules, the mINT is capable of outputting 100wpc into 8 ohms and will drive the majority of speakers on the market with ease.
mini-Integrated SpecificationsCompact size!Covered by a 5 YEAR WARRANTY (Original Purchaser)8"x 8"x 3.5"


[SUP]Product Code:[/SUP]mINT

[TD="class: productPricePrompt"][SUP]Price:[/SUP][/TD]
[TD="class: productPricePrice"]US$ 1,499.00 ea[/TD]
 
Back
Top