*NEW* Esoteric N-05XD

I only have this N05xd for audition for possible purchase. Any help will be appreciated.

Someone said earlier the unit takes about 200 hours to fully break in, what did you experience? Although the unit has perfect control and detail I'm having a bit of a problem bonding with it.
 
Mr Peabody said:
I only have this N05xd for audition for possible purchase. Any help will be appreciated.

Someone said earlier the unit takes about 200 hours to fully break in, what did you experience? Although the unit has perfect control and detail I'm having a bit of a problem bonding with it.
Click to expand...

I’d guess it’s the break-in. Give it 300 or so hours just to be on the safe side. IME, it went from I didn’t quite like the sound to they may have over engineered this thing for the price.
 
Thanks. I don't know how many hours so far guessing 80 to 100. The DAC has loads more information than my current DAC but I'm still not finding it engaging, it's like technically outstanding but I'm not sensing any emotion. Also, no color or texture. I'm using the RDOT filter, "OFF" seems worse for the items I mention.

kzhtoo said:
I’d guess it’s the break-in. Give it 300 or so hours just to be on the safe side. IME, it went from I didn’t quite like the sound to they may have over engineered this thing for the price.
Click to expand...
 
Thanks Stu. I'm at around 125 hours or so and the DAC has improved already. It's like now the sound is more at ease and I'm getting more texture. It has started the seduction, LOL

If anyone stumbles across this thread as a buyer or potential buyer the break in is real.
 
Mr Peabody said:
Thanks Stu. I'm at around 125 hours or so and the DAC has improved already. It's like now the sound is more at ease and I'm getting more texture. It has started the seduction, LOL

If anyone stumbles across this thread as a buyer or potential buyer the break in is real.
Click to expand...

Glad to hear that. What a great word - seduction!

Next, a master clock. It doesn’t have to be top of the line from Esoteric, Cybershaft or Mutec. Any competent master clock will raise its performance.

Then, Altaira. [emoji51]
 
Don't suppose you can disclose if Lumin have shipped any U2 modules to Esoteric? N-03T is due for replacement and I've got a hunch whatever it is will be built around U2.
 
Sorry I keep calling you Stu, that's what it sounds like when my screen reader tries to prnounce kzhtoo. I'm so used to hearing Stu that I forget the issue.

kzhtoo said:
Glad to hear that. What a great word - seduction!

Next, a master clock. It doesn’t have to be top of the line from Esoteric, Cybershaft or Mutec. Any competent master clock will raise its performance.

Then, Altaira. [emoji51]
Click to expand...
 
Mr Peabody said:
Sorry I keep calling you Stu, that's what it sounds like when my screen reader tries to prnounce kzhtoo. I'm so used to hearing Stu that I forget the issue.
Click to expand...

No worries. I kind of guessed Stu was me. Lol
 
Mr Peabody said:
Thanks. I don't know how many hours so far guessing 80 to 100. The DAC has loads more information than my current DAC but I'm still not finding it engaging, it's like technically outstanding but I'm not sensing any emotion. Also, no color or texture. I'm using the RDOT filter, "OFF" seems worse for the items I mention.
Click to expand...


Have you tried changing cables to the Esoteric to see if that helps?
 
When I was reading the owner manual for the G05 hook up instructions it says to use a 50 or 75 ohm BNC cable. It seems to me it should be one or the other, isn't there a difference?
 
The 10MHz clock input on the N05xd is 50 Ohm:

Clock input
BNC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Frequencies that can be input (±10 ppm) . . . . . . . . . . . . . . . . . . . . 10 MHz
Input impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Ω

Page 36 of the owner's manual:
https://www.esoteric.jp/downloads/products/esoteric/n-05xd/n-05xd_om_efs_vc.pdf

G-05 10MHz outputs are also 50Ohm (page 9 of the owner's manual):

https://www.esoteric.jp/downloads/products/esoteric/g-05/g-05_om_efs_va.pdf

Clock outputs
Output frequency. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 MHz
Frequency precision. . . . . . . within ±0.01 ppm (when shipped new)
BNC connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Output level. . . . . . . . . . . . . . . . . . . . . . . . . . . sine wave, 0.5 ±0.1 Vrms/50 Ω

Use 50Ohm BNC cable.

Personally, I would go with Mutec REF 10 - a much better clock for less money (or Mutec REF 10 Limited 120 for a bit more).
 
I did know the in/outs were 50 ohm it just confused me when the G05 manual mentioned either could be used. 50 it is though.

You mentioned the Mutec was better however the G05 is just out, I don't think even available yet in U.S. Have you experienced the G05?

Elberoth said:
The 10MHz clock input on the N05xd is 50 Ohm:

Clock input
BNC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Frequencies that can be input (±10 ppm) . . . . . . . . . . . . . . . . . . . . 10 MHz
Input impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Ω

Page 36 of the owner's manual:
https://www.esoteric.jp/downloads/products/esoteric/n-05xd/n-05xd_om_efs_vc.pdf

G-05 10MHz outputs are also 50Ohm (page 9 of the owner's manual):

https://www.esoteric.jp/downloads/products/esoteric/g-05/g-05_om_efs_va.pdf

Clock outputs
Output frequency. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 MHz
Frequency precision. . . . . . . within ±0.01 ppm (when shipped new)
BNC connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Output level. . . . . . . . . . . . . . . . . . . . . . . . . . . sine wave, 0.5 ±0.1 Vrms/50 Ω

Use 50Ohm BNC cable.

Personally, I would go with Mutec REF 10 - a much better clock for less money (or Mutec REF 10 Limited 120 for a bit more).
Click to expand...
 
Mr. Peabody: The manual may state that, however, if an input is designated as 50-ohm in the specs as is the case here, then the only right move is to use a cable rated for that spec. There are some who would declare they are interchangeable, though in truth, careful listening and testing shows they are not. Even the connectors for 50 and 75 ohm are slightly different from each other.

Another great clock option is a Cybershaft OP21.

Sent from my SM-G998U using Tapatalk
 
Esoteric Network Firmware 17 and associated app updates support Tidal MAX Hi-Res FLAC via both native apps (require re-login) and Tidal app Tidal Connect (N-XD series and N-03T).
 
Hello All,

A friend recently bought the N-05XD, he just had a query after checking/reading the user manual.

He wanted to know if it is possible to:

1) disable unused inputs
2) edit the names of the existing inputs

Thanks in Advance of any suggestions/help.
 
You must log in or register to reply here.
Back
Top