Lumin D2 US Warrenty?

[greyscale]

Am listening to my new D2. Have a Question regarding the warranty. I did not receive a registration card in the D2 box and dont see a place at Lumin.com to register my D2. How are these registered with Lumin? Also, is the warranty transferable?


PS. the D2 sounds fantastic feeding my Bryston 7B st amps.:amazing:

 

[GSOphile]

You might try the link copied below from the Lumin web site:

How long is the LUMIN warranty?There is a 24-month worldwide warranty period on all LUMIN products. If you have a warranty claim, please email [email protected]

 

[wklie]

There is no registration card or form to fill. Please keep the invoice. Yes, Lumin warranty is transferable as long as the invoice from an authorized dealer is maintained.

Do you use a preamp between the D2 and the Bryston 7B ST?

 

[greyscale]

Thanks Peter. Yes, I tried to run the D2 thru a Bryston BP-25. No Go. No sound, so, I'm running straight to the 7B St amps. Is it possible to add a volume limiter on the Lumin app?

 

[wklie]

That's strange. If D2 works straight to 7B ST but no sound via a pre-amp, I can only think of pre-amp input not selected, pre-amp muted or volume too low, the pre-amp not powered on (which involves some setup complexity if it is linked with the amp for remote turn on capability), a connection problem, outboard power supply or a hardware fault.

At this time we are not implementing a volume limiter. Please set Analog Output Level to low, which limits the volume by a little on S1 / A1 / T1 / D2 / D1.

 

[greyscale]

That's strange. If D2 works straight to 7B ST but no sound via a pre-amp, I can only think of pre-amp input not selected, pre-amp muted or volume too low, the pre-amp not powered on (which involves some setup complexity if it is linked with the amp for remote turn on capability), a connection problem, outboard power supply or a hardware fault.

At this time we are not implementing a volume limiter. Please set Analog Output Level to low, which limits the volume by a little on S1 / A1 / T1 / D2 / D1.

Peter, this AM I increased the distance between my head and my sphincter. What do u know, the Bryston BP-25 works fine. Had the input set to BAL 2 instead of BAL1 on the front panel. Thanks again.