Welcome to the AudioShark Forums.
Results 1 to 9 of 9

Thread: to M600 or not

  1. #1

    to M600 or not

    I have a dilemma and was hoping for some help/advice.

    I have a opportunity to pickup some M600 monos but to do this would mean selling off other gear that i'm very fond of..

    Is the R1/M600 combo the best way to drive R1 or have other options been just as pleasing in comparison?

    I realise this is totally subjective and a personal decision for myself and either option will hurt a little bit..

    Either I sell some great gear I currently have or miss out on a great deal for M600's...

    Can't seem to make up my mind on this one for some reason..

  2. #2
    Super Moderator
    Join Date
    Apr 2013
    Location
    NY
    Posts
    18,726

    Re: to M600 or not

    That's a tough one Bob. I've never heard TAD M600's and you'd think that they'd be voiced together. Just curious what you think you needed to sell to make the M600's happen? Also, I would suspect the matching preamp might be necessary to get the final "voice" you might be looking for in your system.
    Fleetwood Deville by Oswald Mills Audio, Vienna Acoustics Haydn Jubilee, Wharfedale Linton w/ stands, Klipsch RB-75, Klipsch RP-160M.

    Job INTegrated. Luxman L-595aSE

    NAD C 658 streamer.

    First Watt SIT-3, Job 250 Monos, NuForce STA200, AkitikA GT-102 amp, ASL Wave monos, Dennis Had 45 monos. Absolute Audio Labs PCF 25 amp (improved First Watt F7 super clone)

    Topping D90, RME Audio ADI-2 DAC FS, ModWright Ultimate Sony XA-5400ES.

    Burmester 948, McIntosh MCLK12, Kimber Kable, Siltech, Cardas, Avanti Audio cables.

  3. #3
    Audioshark
    Join Date
    Apr 2013
    Location
    Sarasota, FL
    Posts
    30,086

    Re: to M600 or not

    Bob - one thing to think about is resale. Let me ask you, are you trying to fix a problem with the R1's or are you just itching to try something else?
    My Systems: http://www.audioshark.org/showthread...481#post158481

    "We can hear everything we measure, but we can't measure everything we hear. Let your ears be your guide."

    Dealer for: Aqua Hi-Fi, Aurender, AudioQuest Cables & Power Products, Berkeley Audio, Block Audio (distributor), Boulder Amplifiers, Bowers & Wilkins (B&W), Bryston, Clarisys Audio Loudspeakers (distributor), Classe’ Audio, Degritter Record Cleaning Machines, Esoteric, Finite Elemente, FirstWatt, Focal Loudspeakers and Headphones, GigaFoil, Harbeth Loudspeakers, Hegel, HiFi Man, Innuos, ISO Acoustics, Keces Power Supplies, Kharma Loudspeakers and Electronics, Kuzma Turntables, Lumin, Luxman, Magico Loudspeakers, MBL Speakers & Electronics, MSB Technologies, MySonicLabs Phono Cartridges, Nordost Cables, Ortofon, Pass Labs, Quadraspire, Rega Turntables and Electronics, Shunyata Research, STAX, Stein Music Products, Stillpoints, Soulution, VAC, Vicoustics, Viva Audio, VPI Industries, WireWorld Cables.

    https://suncoastaudio.com/
    Phone: 941-932-0282
    Facebook: https://www.facebook.com/Suncoast-Au...1105178279194/

  4. #4

    Re: to M600 or not

    That's what is appealing about M600 is that they were made to get the most from R1. To make this happen I would need to forego my plans for a second system of Wilson Benesch speakers and darTZeel Amp..

  5. #5

    Re: to M600 or not

    Absolutely Mike.. I will be losing on the gear I sell which is par for course with Hifi I guess..

    I am actually in the process of buying my first amp for R1. It makes sense to me to go straight for the m600 as it was voiced for Tad speakers.. Go for the endgame amp from the beginning should save me money in the end right?

  6. #6

    Re: to M600 or not

    Agree Joe about the matching pre. Although I was hoping to experiment with some different options in regards to the pre tube/ss.

  7. #7
    Super Moderator
    Join Date
    Apr 2013
    Location
    NY
    Posts
    18,726

    Re: to M600 or not

    As long as that's the sound that "you" want. In my mind, I thought a certain combo would or would not work. It was only until I lived with that combo for a while did I actually realize how I liked it.


    Quote Originally Posted by bobwah View Post
    Absolutely Mike.. I will be losing on the gear I sell which is par for course with Hifi I guess..

    I am actually in the process of buying my first amp for R1. It makes sense to me to go straight for the m600 as it was voiced for Tad speakers.. Go for the endgame amp from the beginning should save me money in the end right?
    Fleetwood Deville by Oswald Mills Audio, Vienna Acoustics Haydn Jubilee, Wharfedale Linton w/ stands, Klipsch RB-75, Klipsch RP-160M.

    Job INTegrated. Luxman L-595aSE

    NAD C 658 streamer.

    First Watt SIT-3, Job 250 Monos, NuForce STA200, AkitikA GT-102 amp, ASL Wave monos, Dennis Had 45 monos. Absolute Audio Labs PCF 25 amp (improved First Watt F7 super clone)

    Topping D90, RME Audio ADI-2 DAC FS, ModWright Ultimate Sony XA-5400ES.

    Burmester 948, McIntosh MCLK12, Kimber Kable, Siltech, Cardas, Avanti Audio cables.

  8. #8
    Audioshark
    Join Date
    Apr 2013
    Location
    Sarasota, FL
    Posts
    30,086

    Re: to M600 or not

    Quote Originally Posted by bobwah View Post
    Absolutely Mike.. I will be losing on the gear I sell which is par for course with Hifi I guess..

    I am actually in the process of buying my first amp for R1. It makes sense to me to go straight for the m600 as it was voiced for Tad speakers.. Go for the endgame amp from the beginning should save me money in the end right?
    IF you're going to keep the R1's, yes! What I would do, is look at some other amps that you can borrow/try/demo to see what they do in your system. Can you try the 600 in your system first? I heard Viola with TAD R1's and it was a terrific pairing. But again, very tough resale.

    How long have you had the R1's? My thinking is, if you haven't had them for at least 6 months, live with them a little bit and then try to determine what kind of fine tuning do you need. Maybe the 600's are the right choice, but maybe not. I've only heard TAD at a dealers and at shows. R1's too. Joe is probably one of your best resources since he tried a plethora of amps on his CR1's. Joe's concern was always that the TAD's had a "bite" in the tweeter. You may not hear that or you may. You need to live with them for a while to determine what final seasoning they need!

    What would I pair with TAD's based on my listening experiences? Ayre.
    My Systems: http://www.audioshark.org/showthread...481#post158481

    "We can hear everything we measure, but we can't measure everything we hear. Let your ears be your guide."

    Dealer for: Aqua Hi-Fi, Aurender, AudioQuest Cables & Power Products, Berkeley Audio, Block Audio (distributor), Boulder Amplifiers, Bowers & Wilkins (B&W), Bryston, Clarisys Audio Loudspeakers (distributor), Classe’ Audio, Degritter Record Cleaning Machines, Esoteric, Finite Elemente, FirstWatt, Focal Loudspeakers and Headphones, GigaFoil, Harbeth Loudspeakers, Hegel, HiFi Man, Innuos, ISO Acoustics, Keces Power Supplies, Kharma Loudspeakers and Electronics, Kuzma Turntables, Lumin, Luxman, Magico Loudspeakers, MBL Speakers & Electronics, MSB Technologies, MySonicLabs Phono Cartridges, Nordost Cables, Ortofon, Pass Labs, Quadraspire, Rega Turntables and Electronics, Shunyata Research, STAX, Stein Music Products, Stillpoints, Soulution, VAC, Vicoustics, Viva Audio, VPI Industries, WireWorld Cables.

    https://suncoastaudio.com/
    Phone: 941-932-0282
    Facebook: https://www.facebook.com/Suncoast-Au...1105178279194/

  9. #9

    Re: to M600 or not

    Thats so true Joe.
    Synergy makes such a difference also. Im onto my third amp with the Wilson Benesch. At first I thought the sound was a bit flat and I just didn't feel connected to the music. The next amp was better but I found fatiguing. Now with the darTZeel its a beautiful sound that I enjoy immensely. The longer I spend with my current setup the more I enjoy them and appreciate them.

    Quote Originally Posted by joeinid View Post
    As long as that's the sound that "you" want. In my mind, I thought a certain combo would or would not work. It was only until I lived with that combo for a while did I actually realize how I liked it.

AudioShark - The Best High End Audio Discussion forum.

AudioShark forum is a leading forum site for High End Audio Discussion, Stereo System Discussion, Home Theater System Discussion, Best Home Stereo System Discussion, Home Theater Installation Discussion etc.

The AudioShark forum was created for sharing the passion of high-end Audio. We have Audiophiles from all over the world participating and sharing their knowledge. From novice to experts, you will find a friendly environment for discussing about High End Audio, Stereo System, Home Theater System, Home Stereo System, Home Theater Installation, Amplifiers, Speakers, Subwoofers, Integrated System, Acoustic treatments & Digital Room Corrections and many more.

At AudioShark, we also have incorporated an exciting Marketplace where members can peruse terrific buys on used gear, as well as meet dealers and discuss the purchase of new gear.

We are as crazy about this hobby as you are! So come on in and join us! Audioshark.org the Friendliest Audio Forum!

Industry Participation Disclosure : The owner and administrator of Audioshark is the owner of Suncoast Audio LLC in Sarasota Florida. Suncoast Audio has a full brick and mortar presence in Sarasota with several great show rooms with many world class brands. More information can be found at http://www.suncoastaudio.com

Audioshark is a community of like minded individuals. Audioshark welcomes participation from all manufacturers and owners of all brands and products. It is our belief that online forums provide a community of like minded audiophiles and music lovers to encourage the growth of this wonderful hobby.

Sincerely,
The Audioshark.org Team

to M600 or not

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •