-
November 15, 2020, 03:19 PM #151
- Join Date
- Mar 2020
- Location
- Sweden
- Posts
- 111
Re: Unpacking the Shunyata Everest 8000
The previous CGC generation had a TAP on the Sigma CGC according to spec if I read correctly. Hopefully an Ohm.. version will manifest with everything we need.
Meanwhile the Sigma CGC is truly awesome. I put it on my Etherregen GND terminal into a Denali 6000/T. The whole sound scaled and grew more powerful. Then came the Alpha V2 clock 75 to my OCXO and you can sift through the recording venues air vibrations with your hand now.
-
November 15, 2020, 04:02 PM #152
Re: Unpacking the Shunyata Everest 8000
Hmmm....I'll have to pick up a Shunyata CGC to connect to my EtherREGEN, then. Thanks for the tip...
-
November 15, 2020, 04:27 PM #153
- Join Date
- Oct 2016
- Location
- Gothenburg, Sweden
- Posts
- 58
Re: Unpacking the Shunyata Everest 8000
Sounds like a good idea, yes. I am using one Sigma grounding cable for my Devialet D250 with great result - would be fantastic if a second cable bring a similar benefit.
Skickat från min iPhone med Tapatalk
-
November 16, 2020, 05:32 AM #154
- Join Date
- Mar 2020
- Location
- Sweden
- Posts
- 111
Re: Unpacking the Shunyata Everest 8000
A note about the current CGC cables, I think only the Sigma contains the V2 Cu/Ag configuration.
-
December 6, 2020, 04:48 PM #155
- Join Date
- May 2019
- Location
- US
- Posts
- 217
Re: Unpacking the Shunyata Everest 8000
Can someone chime in on the small LED lights in the bottom front of the Everest? There are two, the one on top is lit blue(ish), there is no light at the bottom one. Normal?
Perlisten S7t speakers with two Perlisten R212s subwoofers | T+A PA 3100 HV integrated amp with PS 3000 HV power supply | Esoteric N-01XD DAC & Streamer| Esoteric G-05 Master Clock | Jay’s Audio CDT3-MK3 Transport | Innuos ZENith MK3| Shunyata Everest
-
December 6, 2020, 06:04 PM #156
-
December 6, 2020, 10:14 PM #157
Re: Unpacking the Shunyata Everest 8000
The second light is a fault light.
It should not be lit under normal conditions.
-
December 7, 2020, 12:13 AM #158
Re: Unpacking the Shunyata Everest 8000
One of the things I like about the LED on Everest is that it is just bright enough to know the device is on, but it is not obtrusive in any way. I wish I could say that for the blue LEDs on my other devices. The EAR 324 and First Sound preamp LEDs are brighter but not egregious; the LED on Keces P3 linear power supply is, I would estimate, ~20X brighter than the LED on Everest.
This is one of things I really like about Shunyata's products; they think things fully through, down to the smallest details; for example, the vibration damping that is also built into Everest and the V2 series of power cords.
-
December 9, 2020, 05:50 AM #159
- Join Date
- Nov 2017
- Location
- Tokyo
- Posts
- 145
Re: Unpacking the Shunyata Everest 8000
Room: Gik Acoustics | Vibration: Townshend pods | Power: Shunyata Omega XC + Everest + Sigma NR v2 + Sigma ground cables | Source: Mojo Audio DejaVu EVO linux server running Roon core (Raat) | Ethernet: Sonore Optical module + Melco S10 with dedicated LPS + Shunyata Omega Ethernet x 2| Synchronous digital (preferred signal path): Mutec MC-3 + USB (Paul Hynes LPS) + Cybershaft OP21A | Dac/Pre/Amplification: Devialet D1000 Pro CI (Chord Sarum T RCA-RCA link) | Speakers: Chord Sarum T + Wilson Benesch Act One Evolution P1
-
December 9, 2020, 07:49 AM #160
- Join Date
- May 2019
- Location
- US
- Posts
- 217
Re: Unpacking the Shunyata Everest 8000
Perlisten S7t speakers with two Perlisten R212s subwoofers | T+A PA 3100 HV integrated amp with PS 3000 HV power supply | Esoteric N-01XD DAC & Streamer| Esoteric G-05 Master Clock | Jay’s Audio CDT3-MK3 Transport | Innuos ZENith MK3| Shunyata Everest
-
December 9, 2020, 10:05 AM #161
- Join Date
- Apr 2017
- Location
- Australia
- Posts
- 1,747
Re: Unpacking the Shunyata Everest 8000
Speakers: Magico M3, ACC, S-SUB | Electronics: Esoteric Grandioso stack | Amplification: Halcro |
Analog cables: Crystal Cable | Digital cables: Shunyata Sigma | Rack: YG Acoustics Rack 1.8
| Source: Kaleidescape Premiere (4 x 6TB) | Power: Shunyata Typhon-QR, Everest and Denali
-
December 11, 2020, 08:12 PM #162
- Join Date
- May 2019
- Location
- US
- Posts
- 217
Re: Unpacking the Shunyata Everest 8000
Being too lazy to replicate here, I am just copying what I wrote my friend on the Everest I bought a week ago:
_———-
Godamit!! Every day I come back from work, I am stunned with how good my shit sounds. I cannot believe how much something as simple as a power distributor brings to the table. It’s like getting a new component.
Here are a few things that are clearly audible to me:
1) The timbre is much better. I thought I already were at a very good point, but this brings it to another level. So natural, so realistic. It’s like I am seating in front of an orchestra. That kind of feeling when you hear someone playing a piano or drum, or a guitar next door. That real
2) Dynamics improvement. Everything has a more pronounced impact. Say when the drum hits, you hear and FEEL it hit.
3) Silent passages are dead silent. Like nothing. Zip
4) Even soundstage is improved. Not so much hight or width, but definitely more depth. This is important for me, because of my room, which suffers from lack of soundstage. Everything extra I can get, it helps.
————
See my signature for the rest of my stuffPerlisten S7t speakers with two Perlisten R212s subwoofers | T+A PA 3100 HV integrated amp with PS 3000 HV power supply | Esoteric N-01XD DAC & Streamer| Esoteric G-05 Master Clock | Jay’s Audio CDT3-MK3 Transport | Innuos ZENith MK3| Shunyata Everest
-
December 11, 2020, 09:36 PM #163
Re: Unpacking the Shunyata Everest 8000
This is due, to large degree, to the massive QR/BB device in Everest; 3X larger than Denali V2 (which in turn has a much larger QR/BB device than Denali V1).
3) Silent passages are dead silent. Like nothing. Zip
-
December 15, 2020, 07:34 AM #164
- Join Date
- Mar 2020
- Location
- Sweden
- Posts
- 111
-
December 15, 2020, 07:50 AM #165
- Join Date
- Apr 2017
- Location
- Australia
- Posts
- 1,747
Re: Unpacking the Shunyata Everest 8000
I'm surprised at your report of the benefit of the CGS given the EtherREGEN was powered from the Denali. I thought the CGS becomes redundant when devices are directly connected to it, but others have also reported the same. With my Denali V1 I don't hear any difference, absolutely nothing at all. It's as if it's not there. I would like to try an Everest but I know that is impossible in this market.
Speakers: Magico M3, ACC, S-SUB | Electronics: Esoteric Grandioso stack | Amplification: Halcro |
Analog cables: Crystal Cable | Digital cables: Shunyata Sigma | Rack: YG Acoustics Rack 1.8
| Source: Kaleidescape Premiere (4 x 6TB) | Power: Shunyata Typhon-QR, Everest and Denali
-
December 15, 2020, 08:39 AM #166
- Join Date
- Mar 2020
- Location
- Sweden
- Posts
- 111
Re: Unpacking the Shunyata Everest 8000
brodricj: I'm talking specifically about running a Sigma CGC V2 from the EtherRegen GND post to the Denali 6000T CGS post.
What you have to consider is that from your ground pin in your powercable you enter a PSU of some sort. From that PSU a small(?) DC cable ventures forth into the Etherregen. Now if you are adding and attaching an 8ga Sigma CGC V2 directly to the EtherRegen GND post you are in a different league of conductor size, going straight to the Denali/Everest CGS post. A parallell GND highway with a silver core just opened up.
-
December 15, 2020, 08:41 AM #167
- Join Date
- Apr 2017
- Location
- Australia
- Posts
- 1,747
Re: Unpacking the Shunyata Everest 8000
Speakers: Magico M3, ACC, S-SUB | Electronics: Esoteric Grandioso stack | Amplification: Halcro |
Analog cables: Crystal Cable | Digital cables: Shunyata Sigma | Rack: YG Acoustics Rack 1.8
| Source: Kaleidescape Premiere (4 x 6TB) | Power: Shunyata Typhon-QR, Everest and Denali
-
January 27, 2021, 07:28 AM #168
- Join Date
- Jan 2021
- Location
- Seattle, WA USA
- Posts
- 4
Re: Unpacking the Shunyata Everest 8000
if you would like to Demo the Everest in your home they are "in stock" today at Music Direct (MD)- you buy it (pay in full) don't like it return within 60 days for a refund (minus shipping costs to you and you pay return shipping) other vendors like The Cable company have a "lending library" I think they run some type of verification on you & you pay 10% down (non-refundable but applies to any future purchase) many people talk about Suncoast Audio being awesome, my only concern is the website says "no returns or refunds" that seems unreasonable as you have no idea what something will sound like in your home... my local Audiophile dealer has a "7 day refunds...30 day exchange policy" which I think is reasonable.. MD has an excessive return exclusion if you are just "buying & returning" everything... common sense applies.. is it OK if i return $10k of Delta cables to spend more on Sigma etc.. shouldn't be a problem
-
January 27, 2021, 07:41 AM #169
- Join Date
- Apr 2017
- Location
- Australia
- Posts
- 1,747
Re: Unpacking the Shunyata Everest 8000
Speakers: Magico M3, ACC, S-SUB | Electronics: Esoteric Grandioso stack | Amplification: Halcro |
Analog cables: Crystal Cable | Digital cables: Shunyata Sigma | Rack: YG Acoustics Rack 1.8
| Source: Kaleidescape Premiere (4 x 6TB) | Power: Shunyata Typhon-QR, Everest and Denali
-
February 2, 2021, 07:11 PM #170
- Join Date
- May 2014
- Posts
- 76
Re: Unpacking the Shunyata Everest 8000
- VPI Aries 3, custom suspension & platter interface; VPI JMW 10.5i - magnetically stabilized; Ortofon Verismo; VPI SDS speed controller. Pass XP-25 - modded & fully shielded + Tubulus umbilical
- Magnum Dynalab MD-90SE/105
- Spectral 4000SV
- Spectral DMC-30SV, Spectral DMA-500AR
- Custom MartinLogan hybrids, REL Stadium III sub - modded
- MIT MA-X phono,90.1 speaker - shielded; Shunyata Everest, Alpha v2 NR, Sigma XC, Alpha v3 CGC
- Isodamp, mumetal, 3M AB5100, Carbon Fiber sheets, Dynamat, Copper foil; Vishay diodes, resistors; Mundorf crossover coils & capacitors; custom electrostatic step-up transformers
-
February 2, 2021, 07:47 PM #171
Unpacking the Shunyata Everest 8000
And do you know why? Time wasters. Tire kickers. Damaged product. We used to do it and had too many people abuse it. The box would come back beat to hell, a giant scratch on it and now it’s an open box unit that nobody wants. The last item we did was a premier DAC for a Doctor in Tallahassee. The Premier came back with gouges on the top as he dragged the spikes from the PSU across the top of it getting it out of his rack. It had to go back to MSB for a whole new chassis and a new box which looked like a dogs breakfast. Before that, a VAC amp. Before that, a Pass X350.8. Before that, a Luxman c900u. I could go on and on. That’s why.
If we know the customer and we have a good relationship with them, we will happily loan out anything and always do. But to folks we don’t know? We’ve stopped doing that after the MSB Premier incident. We are much more like your local dealer for local customers. I hope you support your local dealer. Seems like he has a reasonable policy.
Sent from my iPhone using Tapatalk ProMy Systems: http://www.audioshark.org/showthread...481#post158481
"We can hear everything we measure, but we can't measure everything we hear. Let your ears be your guide."
Dealer for: Aqua Hi-Fi, Aurender, AudioQuest Cables & Power Products, Berkeley Audio, Block Audio (distributor), Boulder Amplifiers, Bowers & Wilkins (B&W), Bryston, Clarisys Audio Loudspeakers (distributor), Classe’ Audio, Degritter Record Cleaning Machines, Esoteric, Finite Elemente, FirstWatt, Focal Loudspeakers and Headphones, GigaFoil, Harbeth Loudspeakers, Hegel, HiFi Man, Innuos, ISO Acoustics, Keces Power Supplies, Kharma Loudspeakers and Electronics, Kuzma Turntables, Lumin, Luxman, Magico Loudspeakers, MBL Speakers & Electronics, MSB Technologies, MySonicLabs Phono Cartridges, Nordost Cables, Ortofon, Pass Labs, Quadraspire, Rega Turntables and Electronics, Shunyata Research, STAX, Stein Music Products, Stillpoints, Soulution, VAC, Vicoustics, Viva Audio, VPI Industries, WireWorld Cables.
https://suncoastaudio.com/
Phone: 941-932-0282
Facebook: https://www.facebook.com/Suncoast-Au...1105178279194/
-
February 2, 2021, 07:49 PM #172
Re: Unpacking the Shunyata Everest 8000
My Systems: http://www.audioshark.org/showthread...481#post158481
"We can hear everything we measure, but we can't measure everything we hear. Let your ears be your guide."
Dealer for: Aqua Hi-Fi, Aurender, AudioQuest Cables & Power Products, Berkeley Audio, Block Audio (distributor), Boulder Amplifiers, Bowers & Wilkins (B&W), Bryston, Clarisys Audio Loudspeakers (distributor), Classe’ Audio, Degritter Record Cleaning Machines, Esoteric, Finite Elemente, FirstWatt, Focal Loudspeakers and Headphones, GigaFoil, Harbeth Loudspeakers, Hegel, HiFi Man, Innuos, ISO Acoustics, Keces Power Supplies, Kharma Loudspeakers and Electronics, Kuzma Turntables, Lumin, Luxman, Magico Loudspeakers, MBL Speakers & Electronics, MSB Technologies, MySonicLabs Phono Cartridges, Nordost Cables, Ortofon, Pass Labs, Quadraspire, Rega Turntables and Electronics, Shunyata Research, STAX, Stein Music Products, Stillpoints, Soulution, VAC, Vicoustics, Viva Audio, VPI Industries, WireWorld Cables.
https://suncoastaudio.com/
Phone: 941-932-0282
Facebook: https://www.facebook.com/Suncoast-Au...1105178279194/
-
February 2, 2021, 07:56 PM #173
- Join Date
- Jan 2021
- Location
- Seattle, WA USA
- Posts
- 4
Re: Unpacking the Shunyata Everest 8000
i Just discovered he lives in Australia.. you can't expect a USA Reseller like MD to ship overseas with a "60 day return policy" dealing with shipping & insurance Worldwide tracking "door to door" or trying to get U.S. Customs (or Australia)to waive any Taxes, VAT on both original ship & return etc is a nightmare - Shunyata has an Authorized Australia distributor on their website.. The problem here is Price... for example an Omega Ethernet from an Auzzie reseller MSRP Runs $4500 AZD (or $3425 USA) but the same cable retails for $2500 USA (or $3284 AZD) $1216 savings (not including shipping VAT taxes or duties etc..)
Shunyata never said you are banned from buying our product.. you need to buy it from a distributor/reseller in the country you live in.
-
February 2, 2021, 09:13 PM #174
- Join Date
- Apr 2017
- Location
- Australia
- Posts
- 1,747
Re: Unpacking the Shunyata Everest 8000
Speakers: Magico M3, ACC, S-SUB | Electronics: Esoteric Grandioso stack | Amplification: Halcro |
Analog cables: Crystal Cable | Digital cables: Shunyata Sigma | Rack: YG Acoustics Rack 1.8
| Source: Kaleidescape Premiere (4 x 6TB) | Power: Shunyata Typhon-QR, Everest and Denali
-
February 2, 2021, 09:16 PM #175
- Join Date
- Apr 2017
- Location
- Australia
- Posts
- 1,747
Re: Unpacking the Shunyata Everest 8000
No. The problem is the Australian distributor will not sell the Shunyata products I want to buy. There is no way around that, they just won't do it.
To be clear I buy my Shunyata interconnect cables locally, except when they jack up the price by double after I place my order and then I cancel and have to wait 3 months to get a refund of my deposit. What I can't buy are the power cables and power distributors I want. The distributor just won't import them. Period.Speakers: Magico M3, ACC, S-SUB | Electronics: Esoteric Grandioso stack | Amplification: Halcro |
Analog cables: Crystal Cable | Digital cables: Shunyata Sigma | Rack: YG Acoustics Rack 1.8
| Source: Kaleidescape Premiere (4 x 6TB) | Power: Shunyata Typhon-QR, Everest and Denali
-
February 2, 2021, 11:28 PM #176
- Join Date
- May 2014
- Posts
- 76
Re: Unpacking the Shunyata Everest 8000
- VPI Aries 3, custom suspension & platter interface; VPI JMW 10.5i - magnetically stabilized; Ortofon Verismo; VPI SDS speed controller. Pass XP-25 - modded & fully shielded + Tubulus umbilical
- Magnum Dynalab MD-90SE/105
- Spectral 4000SV
- Spectral DMC-30SV, Spectral DMA-500AR
- Custom MartinLogan hybrids, REL Stadium III sub - modded
- MIT MA-X phono,90.1 speaker - shielded; Shunyata Everest, Alpha v2 NR, Sigma XC, Alpha v3 CGC
- Isodamp, mumetal, 3M AB5100, Carbon Fiber sheets, Dynamat, Copper foil; Vishay diodes, resistors; Mundorf crossover coils & capacitors; custom electrostatic step-up transformers
-
February 2, 2021, 11:46 PM #177
- Join Date
- May 2013
- Location
- Tallahassee, Florida/Greenville, SC
- Posts
- 3,242
Re: Unpacking the Shunyata Everest 8000
Nor do they even carry power products that will work in Australia. The only Shunyata power conditioners he could even attempt to order wouldn't work anyway.
Main - JVC QL-Y7/Denon DL-301 Mk II, Gold Note PH-10, Jays CDT3 Mk3 , Auralic Aries G2.2, Holo May KTE, Supratek Cabernet, Kinki Studio EX-B7 monoblocks, Verity Audio Otello, (2) Rythmik F12SE, Audio Envy IC, SC & PC's, Triode Wire Lab PC's, Inakustik USB and I2S, (2) Puritan Audio Labs PSM-156 with Groundmaster City, Timbernation rack
Family Room - Oppo UDP-203, Auralic Aries, Aqua La Voce S3, Kinki Studio EX-M1+, Nola KO, (2) Rythmik F-12G, Wireworld SC & IC's, Neotech PC's, SurgeX SA-1810
Greenville, SC- Jays CDT2 Mk 3, Auralic Aries G1, Holo Spring 3 KTE, Supratek Chardonnay, Odyssey Audio Kismet Reference, Rosso Fiorentino Volterra 2, (2) RSL Speedwoofers, iFi Audio Power Station, Wireworld IC's, Inakustik USB and I2s, Triode Wire Lab SC, Triode Wire Lab PC's, Furutech NCF Clear Line, Timbernation rack.
-
February 3, 2021, 01:02 AM #178
Re: Unpacking the Shunyata Everest 8000
I suspect there is more to this than what we are reading here. If Shunyata won’t sell, or let anyone ship, to Australia then there must be a reason.
Bud
Lumin X1 file player, Westminster Labs interconnect cable
Sony XA-5400ES SACD
Pass XP-22 pre, X600.5 amps
Magico S5 MKII Mcast Rose speakers, SPOD spikes
Shunyata Triton v3/Typhon QR for source, Denali 2000 (2) for amps
Shunyata Sigma XLR analog ICs, Sigma speaker cables
Shunyata Sigma HC (2), Sigma Analog, Sigma Digital, Z Anaconda (3) power cables
Mapleshade Samson four shelf maple rack, Micropoint brass footers
Three 20 amp circuits.
-
February 3, 2021, 01:11 AM #179
- Join Date
- May 2013
- Location
- Tallahassee, Florida/Greenville, SC
- Posts
- 3,242
Re: Unpacking the Shunyata Everest 8000
There is an Australian distributor and has been and he has to order through them for new products. He has been told that multiple times but he wants to bypass that process. Australia is not in MD's territory and they only sell products that will work with the US voltage.
Main - JVC QL-Y7/Denon DL-301 Mk II, Gold Note PH-10, Jays CDT3 Mk3 , Auralic Aries G2.2, Holo May KTE, Supratek Cabernet, Kinki Studio EX-B7 monoblocks, Verity Audio Otello, (2) Rythmik F12SE, Audio Envy IC, SC & PC's, Triode Wire Lab PC's, Inakustik USB and I2S, (2) Puritan Audio Labs PSM-156 with Groundmaster City, Timbernation rack
Family Room - Oppo UDP-203, Auralic Aries, Aqua La Voce S3, Kinki Studio EX-M1+, Nola KO, (2) Rythmik F-12G, Wireworld SC & IC's, Neotech PC's, SurgeX SA-1810
Greenville, SC- Jays CDT2 Mk 3, Auralic Aries G1, Holo Spring 3 KTE, Supratek Chardonnay, Odyssey Audio Kismet Reference, Rosso Fiorentino Volterra 2, (2) RSL Speedwoofers, iFi Audio Power Station, Wireworld IC's, Inakustik USB and I2s, Triode Wire Lab SC, Triode Wire Lab PC's, Furutech NCF Clear Line, Timbernation rack.
-
February 3, 2021, 08:35 AM #180
- Join Date
- Apr 2017
- Location
- Australia
- Posts
- 1,747
Re: Unpacking the Shunyata Everest 8000
You've totally missed the point. I can't buy what I want locally because the local distributor won't import it. The only way around that is to find another distributor somewhere else and buy it from them. MD have the power cables I want. The local distributor does not. Neither will sell to me.
Speakers: Magico M3, ACC, S-SUB | Electronics: Esoteric Grandioso stack | Amplification: Halcro |
Analog cables: Crystal Cable | Digital cables: Shunyata Sigma | Rack: YG Acoustics Rack 1.8
| Source: Kaleidescape Premiere (4 x 6TB) | Power: Shunyata Typhon-QR, Everest and Denali
-
February 18, 2021, 04:48 PM #181
Re: Unpacking the Shunyata Everest 8000
My Systems: http://www.audioshark.org/showthread...481#post158481
"We can hear everything we measure, but we can't measure everything we hear. Let your ears be your guide."
Dealer for: Aqua Hi-Fi, Aurender, AudioQuest Cables & Power Products, Berkeley Audio, Block Audio (distributor), Boulder Amplifiers, Bowers & Wilkins (B&W), Bryston, Clarisys Audio Loudspeakers (distributor), Classe’ Audio, Degritter Record Cleaning Machines, Esoteric, Finite Elemente, FirstWatt, Focal Loudspeakers and Headphones, GigaFoil, Harbeth Loudspeakers, Hegel, HiFi Man, Innuos, ISO Acoustics, Keces Power Supplies, Kharma Loudspeakers and Electronics, Kuzma Turntables, Lumin, Luxman, Magico Loudspeakers, MBL Speakers & Electronics, MSB Technologies, MySonicLabs Phono Cartridges, Nordost Cables, Ortofon, Pass Labs, Quadraspire, Rega Turntables and Electronics, Shunyata Research, STAX, Stein Music Products, Stillpoints, Soulution, VAC, Vicoustics, Viva Audio, VPI Industries, WireWorld Cables.
https://suncoastaudio.com/
Phone: 941-932-0282
Facebook: https://www.facebook.com/Suncoast-Au...1105178279194/
-
March 7, 2021, 05:40 PM #182
- Join Date
- Jun 2019
- Location
- Houston
- Posts
- 24
Re: Unpacking the Shunyata Everest 8000
refresh of this thread:
i had previously been using a hodgepodge of AC tweaks (PS Audio PS10 + 2 HF MC1 Pro Magnets + Add-Power Wizard + Akiko Corelli, the latter being the best of the lot).
bought an everest, then demo'd the following cords feeding it:
SR Sigma NR (terrible match, too dark and rolled)
Sigma XC (far better, but still rolled and not detailed enough)
AQ Dragon (great dynamics and resolution, but was trying too hard on resolution - sounded like silver cabling, and generated fatigue)
Omega XC (the keeper)
i'm not big on spending $ and i generally find reviews hyperbolic. but the everest + omega (which is *required* to get the proper effects IMHO) is a truly fabulous AC solution. relative to my prior setup, its considerably more dynamic, extended and with far far better resolution without sounding forced or exaggerated (and resolution always being a function of the noise floor, which is nonexistent with this solution). tone is properly balanced from end to end, and PRAT is ideal (which i could not say with the sigma, or any transformer-based AC conditioner i ever tried). and i'd be remiss if i didn't point out the sturdy build quality of the everest, which cannot be said for competing conditioners at $10k+ (which might be housed in flimsy chassis, or employ questionable computer logic--and computers never fail do they?); the everest is plug and forget, and clearly built to last, per the lifetime warranty.
the thing about introducing new components is that the enthusiasm over the change has to be tempered against long term listenability, as not every change is a long-term solution.
the everest+ omega XC is just that.
wholeheartedly recommended, and my only quibble is the considerable price to entry.Jays CD3Mk 2 transport + stillpoint ultra 6s
Aurender W20Se streamer + stillpoint ultra 6s
Playback Designs Edelweiss DAC + stillpoint ultra 6s
Luxman C900
Luxman M900 + stillpoint 5s
Estelon X Diamond mk2 on townshend stands
Custom ICs / AC from TG Audio, Synergistic Research Galileo SX Speaker Cable
AC: Custom power conditioning & AC cables
Symposium Foundation Ultra rack
Tube traps
-
March 7, 2021, 08:11 PM #183
- Join Date
- May 2019
- Location
- US
- Posts
- 217
Re: Unpacking the Shunyata Everest 8000
My experience is completely different. Although this may not mean anything, this is just my experience.
One thing we all agree, Everest is a game changer. Simple.
In terms of the power cords on Everest: I initially and temporarily, got the Sigma EF, as this is only what the dealer had in stock when I got the Everest. Ordered the Sigma XC and waited until it arrived. Then I got the itch, and I got the Omega XC. So I tried three power cords on my Everest, the Sigma EF, the Sigma XC, and Omega XC.
Bottom line is the Omega XC is the best match on Everest hands down. No question. That is only if money grows on trees. But in the real world, I believe the Sigma XC is the more realistic match for the price, value for the money.
If I were to quantify, on a scale of 1 to 10 from EF to Omega XC: the Sigma XC gets you up to 7. Then the Omega to 10.
Again, my ears, my subjective impression, in my system (see signature).Perlisten S7t speakers with two Perlisten R212s subwoofers | T+A PA 3100 HV integrated amp with PS 3000 HV power supply | Esoteric N-01XD DAC & Streamer| Esoteric G-05 Master Clock | Jay’s Audio CDT3-MK3 Transport | Innuos ZENith MK3| Shunyata Everest
-
March 7, 2021, 08:32 PM #184
- Join Date
- Jun 2019
- Location
- Houston
- Posts
- 24
Re: Unpacking the Shunyata Everest 8000
also worth noting:
as i think caelin noted elsewhere, i found that the everest did not play well with any other tweaks. none. in every instance they compromised the everest's capabilities.Jays CD3Mk 2 transport + stillpoint ultra 6s
Aurender W20Se streamer + stillpoint ultra 6s
Playback Designs Edelweiss DAC + stillpoint ultra 6s
Luxman C900
Luxman M900 + stillpoint 5s
Estelon X Diamond mk2 on townshend stands
Custom ICs / AC from TG Audio, Synergistic Research Galileo SX Speaker Cable
AC: Custom power conditioning & AC cables
Symposium Foundation Ultra rack
Tube traps
-
March 8, 2021, 08:45 AM #185
- Join Date
- Oct 2015
- Location
- Chicago, IL
- Posts
- 67
Re: Unpacking the Shunyata Everest 8000
I’m a fan of Shunyata and my system is powered by their products. But an $8k power conditioner that needs a $7k power cord to function well, makes me question if the Everest is really my next step forward from my 6000T.
Main System:
Speakers: Magico S3 MK1 | Amp: Boulder 1160 | Pre-Amp: Ref10 | Digital: DCS Vivaldi 3/4 stack & esoteric K07x | Phono-Pre: ARC Ref 2se | Phono: AMG Viella w\ 12JT & Benz LPS cart.
Living Room:
Speakers: KEF LS50 | Amp: Primaluna Prologue Premium | Digital: Lumin D2
-
March 8, 2021, 09:48 AM #186
Re: Unpacking the Shunyata Everest 8000
Jim
D'Agostino Momentum M-400's MxV’s & HD Pre-amp
Wilson Alexandria X2 Series 2 speakers
Digital: dCS Vivaldi APEX DAC, Clock & Upsampler
Analog: SME 20/3 with Esoteric E-03 Phono
Transparent Opus Speaker Cable & Interconnects & Opus Power Cords
Power Cords on Digital: Shunyata
Power Conditioner - Shunyata Everest
-
March 8, 2021, 06:46 PM #187
- Join Date
- May 2020
- Location
- Kirkland, WA
- Posts
- 90
Re: Unpacking the Shunyata Everest 8000
It’s more about leaving money on the table. Also, it’s true for every conditioner that its performance depends on the power cord feeding it from the wall. I see it more as a good/better/best with the Omega XC being “best”, Sigma XC being “better” and maybe Alpha XC as “good”.
-
March 8, 2021, 08:50 PM #188
- Join Date
- Oct 2013
- Location
- Sacramento
- Posts
- 1,120
Re: Unpacking the Shunyata Everest 8000
This discussion is very frustrating for me. I am building two semi-final systems. I would like an Everest for one of them but can't handle the size and shape. Its just to huge. I don't have room next to my double-width stand. And one of the slots is dedicated for a power conditioner. That is where an Everest would go if it was a traditional shape. A 6-outlet of the same quality would be even better for price. Fitting into that shelf space would also preclude the need for longer power cords necessitated by going farther off-center with a conditioner. The style and size of the Everest leaves me scratching my head.
But alas, If I can't fit an Everest I will keep the non-Shunyata power conditioner I already have and be saved from buying a bunch of Shunyata PCs to pair with an Everest. I should probably stop reading this thread.
-
March 8, 2021, 08:53 PM #189
- Join Date
- Apr 2017
- Location
- Australia
- Posts
- 1,747
Re: Unpacking the Shunyata Everest 8000
Hang in there. Shunyata put out a teaser a few months ago to expect a new product soon. From what I understand it is the traditional form factor, but a level down in performance to Everest with fewer outlets. Nothing officially announced yet, but it has to be sooner than later now.
Speakers: Magico M3, ACC, S-SUB | Electronics: Esoteric Grandioso stack | Amplification: Halcro |
Analog cables: Crystal Cable | Digital cables: Shunyata Sigma | Rack: YG Acoustics Rack 1.8
| Source: Kaleidescape Premiere (4 x 6TB) | Power: Shunyata Typhon-QR, Everest and Denali
-
March 8, 2021, 09:02 PM #190
- Join Date
- Oct 2013
- Location
- Sacramento
- Posts
- 1,120
Re: Unpacking the Shunyata Everest 8000
Thank you for that information. It is encouraging. It just makes good business sense. Selling a power conditioner opens up potential sales of other Shunyata power cords, interconnects and speaker cable. At the very least, a matching power cord for the conditioner. I hope we get news soon.
-
May 27, 2021, 03:45 PM #191
- Join Date
- Oct 2013
- Location
- Sacramento
- Posts
- 1,120
-
May 27, 2021, 05:06 PM #192
- Join Date
- May 2016
- Posts
- 572
Re: Unpacking the Shunyata Everest 8000
I wonder if the delays have anything to do with the current climate (Supply chain)
That said, the upcoming product was supposed to be a Typhon QR and Denali 2000T Replacement.
A two outlet box for high end Monoblock amps with massive QRBB plus more tech from the Everest.
Your source components would plug into the Everest and high end amps into this device.
I don't think a smaller Everest is in the cards.
Aka a 6 or 4 outlet version.
They have the Denali 6000V2 to fill that void.
-
May 27, 2021, 05:42 PM #193
Re: Unpacking the Shunyata Everest 8000
A good summary, Mdp.
I think the reason that Everest is the size and form factor it is, is because it has a QR/BB device that is 3X the size of that in Denali 6000/S V2, AND a Cmode (common mode) filter (that is not in Denali) that would prevent it fitting into a horizontal chassis that would fit in a standard (usually 17" wide) audio rack shelf.
-
May 28, 2021, 12:33 PM #194
- Join Date
- Oct 2013
- Location
- Sacramento
- Posts
- 1,120
Re: Unpacking the Shunyata Everest 8000
mdp632,
Thank you for the clarification on products under development disappointing as the news is to me. But in the glass-half-full category it does save me a lot of money and save me the hassle of selling what I have now. I can cross a Shunyata power conditioner and two power cords off of my wish list.
-
May 28, 2021, 12:37 PM #195
- Join Date
- Oct 2013
- Location
- Sacramento
- Posts
- 1,120
Re: Unpacking the Shunyata Everest 8000
-
May 28, 2021, 01:22 PM #196
-
May 28, 2021, 01:24 PM #197
-
May 28, 2021, 01:55 PM #198
- Join Date
- Oct 2013
- Location
- Sacramento
- Posts
- 1,120
Re: Unpacking the Shunyata Everest 8000
Doing nothing = standing pat.
There is no other power distributor on my wish list so there will not be a change for now. My experience with Shunyata a decade or more ago was frustrating. As soon as I bought one of their products they came out with a revision that was allegedly much better. Witness the current v2 labels etc. and evolution of Hydra into multiple versions. I suspect that trend will continue so I see no need to jump in now.
-
May 28, 2021, 02:38 PM #199
- Join Date
- May 2020
- Location
- Kirkland, WA
- Posts
- 90
Re: Unpacking the Shunyata Everest 8000
Digital: Antipodes K30 > Shunyata Omega USB > Gustard X26pro DAC
Amp & Speakers: Spectral DMA-150mk2 > Aerial 10T
Foundation: Stillpoints Ultra, Shunyata Denali power conditioner, Shunyata Delta power cords, Shunyata Alpha interconnect, Shunyata Sigma Ethernet, MIT Matrix HD60 speaker cables, ASC isothermal tube traps
-
May 28, 2021, 02:45 PM #200
- Join Date
- May 2020
- Location
- Kirkland, WA
- Posts
- 90
Re: Unpacking the Shunyata Everest 8000
My original Denali is as good as it was when I purchased it. The Denali v2 didn’t diminish it one bit. I’m glad I hopped onboard with a company that continues to innovate - especially when that innovation brings a bigger bang for the buck.
I have to admit though feeling some disappointment when I leaned that my Denali v1 wasn’t upgradable to v2. But apparently not much of any f the parts were carried over to the v2. It was pretty much a brand new offering. But at the end of the day, I’m still just as happy with my Denali v1 as I was they day it arrived.Digital: Antipodes K30 > Shunyata Omega USB > Gustard X26pro DAC
Amp & Speakers: Spectral DMA-150mk2 > Aerial 10T
Foundation: Stillpoints Ultra, Shunyata Denali power conditioner, Shunyata Delta power cords, Shunyata Alpha interconnect, Shunyata Sigma Ethernet, MIT Matrix HD60 speaker cables, ASC isothermal tube traps
AudioShark forum is a leading forum site for High End Audio Discussion, Stereo System Discussion, Home Theater System Discussion, Best Home Stereo System Discussion, Home Theater Installation Discussion etc.
The AudioShark forum was created for sharing the passion of high-end Audio. We have Audiophiles from all over the world participating and sharing their knowledge. From novice to experts, you will find a friendly environment for discussing about High End Audio, Stereo System, Home Theater System, Home Stereo System, Home Theater Installation, Amplifiers, Speakers, Subwoofers, Integrated System, Acoustic treatments & Digital Room Corrections and many more.
At AudioShark, we also have incorporated an exciting Marketplace where members can peruse terrific buys on used gear, as well as meet dealers and discuss the purchase of new gear.
We are as crazy about this hobby as you are! So come on in and join us! Audioshark.org the Friendliest Audio Forum!
Industry Participation Disclosure : The owner and administrator of Audioshark is the owner of Suncoast Audio LLC in Sarasota Florida. Suncoast Audio has a full brick and mortar presence in Sarasota with several great show rooms with many world class brands. More information can be found at http://www.suncoastaudio.com
Audioshark is a community of like minded individuals. Audioshark welcomes participation from all manufacturers and owners of all brands and products. It is our belief that online forums provide a community of like minded audiophiles and music lovers to encourage the growth of this wonderful hobby.
Sincerely,
The Audioshark.org Team
Yes...it makes for a BIG improvement. Every demo I've heard where at Altaira was in the system, folks listened, and then the Altaira(s) were removed, and folks immediately demanded the Altaira be put...
Altaira or Gemini CGS on...