digital cable of choice for N10 coaxial vs USB
Welcome to the AudioShark Forums.
Results 1 to 8 of 8
  1. #1
    Junior Member
    Join Date
    May 2018
    Posts
    3
    Post Thanks / Like

    digital cable of choice for N10 coaxial vs USB

    Hi there
    New owner of a N10 here, wondering what do you guys use as digital cable to your DACs.
    Do you prefer USB or SPDIF interface?
    Of course using USB the DAC's clock takes control and on coax the N10's clock steps into action.
    If you also can name your cable brand of choice, that would be very interesting.
    I for myself compared an Ultra USB from Transparent vs a (borrowed, unknown brand) coaxial. The results are mixed on my side, to be honest, that's why I want some advise from your experience.
    I use an Accuphase DC37, don't know which clock is more refined, Accu's vs N10's.
    Cheers, thanks in advance.

  2. #2
    Super Moderator
    Join Date
    Apr 2013
    Location
    NY
    Posts
    16,084
    Post Thanks / Like

    Re: digital cable of choice for N10 coaxial vs USB

    Welcome to the forum, thank you for joining.
    Joe

    Accuphase E-650, Misho Myronov Wooden Amp and Wooden preamp, AkitikA GT-102 power amplifier, Valvet E2, Avantgarde Duo XD, First Watt SIT-3, Luxman MQ-300, Job INTegrated, Job 250 Monos, Cary 300B SE, Klipsch RP-160M, Klipsch RB-75, ModWright Ultimate Sony XA-5400ES, ASL Wave monos, Kimber Kables, Siltech, Cardas, Avanti Audio cables, Burmester 948, Linear Tube Audio MZ2, Naim Supernait 2, Lumin U1 mini, McIntosh MCLK12, Conrad Johnson GAT2.

  3. #3
    Junior Member
    Join Date
    May 2018
    Posts
    3
    Post Thanks / Like

    Re: digital cable of choice for N10 coaxial vs USB

    Nice to meet you

  4. #4
    Senior Member
    Join Date
    Oct 2015
    Location
    New York City Metro Area
    Posts
    416
    Post Thanks / Like

    digital cable of choice for N10 coaxial vs USB

    Thanks for your question. Clearly each person will have his/her own preference here and itís important to draw your own conclusions based on the unique attributes of your own system and listening environment. This said...

    I have a N10 and have been using both the USB and the AES/EBU outputs for quite some time.

    In the past I think I preferred AES/EBU when listening to PCM. Today however I use an Ansuz D2 USB cable exclusively going to my dac, a Lampizator Pacific. I also use a Kubala Sosna Realization USB cable from time to time. Another top performing cable in my opinion...

    Iíll leave you with this thought... if you feel you have a world class dac and are confident in its clock you may satisfied with the USB connection. If however you feel you want to derive max benefit from the capabilities of the N10, coax may be your preferred choice. Hope this helps and congrats on a great component such as the N10!


    Sent from my iPhone using Tapatalk

  5. #5
    Senior Member
    Join Date
    Jan 2014
    Location
    USA , NYC
    Posts
    366
    Post Thanks / Like

    Re: digital cable of choice for N10 coaxial vs USB

    AES should have a more consistent sound , due to there being less non spec compliant makers.
    what most don't know or don't care is that there is specs for all we use . What makes them sound diffent mostly has to do with jitter caused by a host of reasons . The Dac and your aurendar each have an imp the difference of them and what the cables change by being off spec make the sound vary greatly .
    If your dac does not need usb power , use a power cutter. Next I would buy a simple sub 2.0 and 3.0 printer cable. They will give you a baseline to use.
    After this if usb try one that has the least effect again a baseline to guide you.
    After this begins what you feel you need. Others may have other views on this too.

  6. #6
    Junior Member
    Join Date
    May 2018
    Posts
    3
    Post Thanks / Like

    Re: digital cable of choice for N10 coaxial vs USB

    @La_Dolce_Vita, @Alrainbow: Thank you very much for your input. I use an Accuphase DC37 DAC, unfortunately no AES. Still experimenting, for me USB has more detail, but Coax it's more... musical, should I say.

  7. Thanks La Dolce Vita thanked for this post
  8. #7
    Senior Member
    Join Date
    Oct 2015
    Location
    New York City Metro Area
    Posts
    416
    Post Thanks / Like

    Re: digital cable of choice for N10 coaxial vs USB

    Quote Originally Posted by ctzzzz View Post
    @La_Dolce_Vita, @Alrainbow: Thank you very much for your input. I use an Accuphase DC37 DAC, unfortunately no AES. Still experimenting, for me USB has more detail, but Coax it's more... musical, should I say.
    Please do let us know how you are making out here...


    Sent from my iPhone using Tapatalk

  9. #8
    Junior Member
    Join Date
    Nov 2013
    Posts
    3
    Post Thanks / Like

    Re: digital cable of choice for N10 coaxial vs USB

    I use both digital cables for my N10 , USB and AES/EBu.
    i find both giving something to music on different resolution files or streaming.
    USB allows for more flexibility playing all DSD files and high 24/384Khz pcm.

    i am using Stealth usb cable and have on loan Ansuz D2 which also sounds great.
    for AES/EBU I use Jorma Digital 110Ohm .

    also have on loan a bnc new cable. All have their strong points.
    other favor streaming and other internal collection.

    so no clear winner on USB vs Coaxial for N10.