Shunyata Denali and HD TV
Welcome to the AudioShark Forums.
Results 1 to 7 of 7
  1. #1
    Senior Member
    Join Date
    Jan 2016
    Location
    Solana Beach, CA
    Posts
    126
    Post Thanks / Like

    Shunyata Denali and HD TV

    I was lucky enough to purchase a Shunyata Denali for my 2nd audio system from Mike. Thanks for the great service Mike!

    That system is currently source-less as I await a new dac. HOWEVER, while getting everything hooked up to the Denali, there were a couple of extra plugs and I decided to go ahead and plug the HD TV in. My wife (who is not an audio- or videophile) and I sat down on the couch and I turned on the TV. Within 15 seconds we turned to each other at the same time with looks of shock on our faces--Are we really seeing that? Deeper and more vibrant colors, better blacks, altogether WAY better. NOT subtle.

    Just hope it's that good once I turn on the audio system!

    Dave
    Analog source: AMG Viella 12; Ortofon Anna cartridge
    Digital source: Totaldac d1-seven DAC, Totaldac d1-server with Gigafilter
    Pre amp: VAC Master with phono
    Phonostage: ​Constellation Andromeda
    Amps: VAC 200iQ monoblocks
    Speakers: Magico M3 with MPods
    Cables: Synergistic Research Galileo
    Power products: Synergistic Research Power Cell 12 UEF and Transporter Ultra. Galileo power cords.

  2. Thanks Mike thanked for this post
    Likes Mike, CGabriel liked this post
  3. #2
    Senior Member
    Join Date
    May 2013
    Location
    Silicon Valley
    Posts
    2,093
    Post Thanks / Like

    Re: Shunyata Denali and HD TV

    LOL. On my previous 57" Hitachi RPTV I removed the hard wired stock power cord, and added an IEC connector. Then I used a spare Shunyata Zitron Cobra power cable on the TV, with the same results you experienced, such as brighter, more vivid colors, and details.

    My 75" Sony Z9D is too new to cut up to replace the stock power cord, but I do use a Shunyata Cyclop v2 on it. I am debating whether I should get a dedicated AC circuit for it, but I do turn off everything else on the line when I watch a movie.
    Bud

    Lumin X1
    Sony XA-5400ES SACD
    Pass XP-22 pre, X600.5 amps
    Magico S5 MKII Mcast Rose speakers, SPOD spikes

    Shunyata Triton v3/Typhon QR for preamp, Denali 2000 (2) for amps
    Shunyata Sigma XLR analog ICs, Sigma speaker cables
    Shunyata Sigma HC (2), Sigma Analog, Sigma Digital, Z Anaconda (3) power cables

    Mapleshade Samson V.3 four shelf solid maple rack, Micropoint brass footers
    Three 20 amp circuits.

  4. Likes CGabriel liked this post
  5. #3
    Senior Member
    Join Date
    Sep 2017
    Location
    Seattle
    Posts
    851
    Post Thanks / Like

    Re: Shunyata Denali and HD TV

    I have also benefited by using extra cords on a TV, and my sons gaming computer, both seeing increased differences in visual and performance


    Sent from my iPhone using Tapatalk Pro
    Power Conditioning, Filters & Switch: Nordost QRT Power Product Line, Furutech GTX-D NCF/GTX 105D, 20 AMP Dedicated w/Surge Protection, AQVox SE switch, Keces LPS P3 & P8 w/Nordost AC power and Ghent DC cables for the Gigafoil v4, modem, routers and switches.
    Cables, Isolation, Room Treatment: Nordost Supreme Reference (Odin) Distribution, Reference Line (Valhalla 2) Components and Speakers, HRS M3X Platforms & Damping Plates. Stillpoint’s Ultra 6/SS and Vicoustic Room Treatments
    Power & Sound: D’Agostino Pre-Amplifier to D’Agostino Momentum Mono’s driving Wilson Alexia’s
    Source and Digital: Aurender N10, Brinkmann Nyquist MKII



  6. #4
    Senior Member
    Join Date
    Jan 2014
    Location
    USA , NYC
    Posts
    378
    Post Thanks / Like

    Re: Shunyata Denali and HD TV

    I can't say power cords help video cause I have tried
    I can say the Denali does work on tv and audio. The principle in theres is simple but effective even the outlet it's plugged into of it has spares is better then before. The ps audio power plants work wonders on video and good for the front end
    I feel no power regen or power cond , I iso are good for amps if they are large
    in my place I made a 20 kw balanced iso
    ground isolated from my home. This was good until I bought my ML NO 33 amps. Between them and 2 2000 watt woofer tower amps I felt it was holding things back.
    One caviate is an iso that useses a 230 volt input to 120 volt output has an advantage st lower dc on the mains.
    TUBEZATOR

    preamp ML26
    amps ML No.33
    Bespoke Windows Server 2016 server with AO
    Infinity IRS-V speakers with Xover redone by Arie Nudell.
    Dac lampi Pac and GG2.



  7. #5
    Senior Member
    Join Date
    May 2013
    Location
    Silicon Valley
    Posts
    2,093
    Post Thanks / Like

    Re: Shunyata Denali and HD TV

    Quote Originally Posted by Alrainbow View Post
    I can't say power cords help video cause I have tried
    I can say the Denali does work on tv and audio. The principle in theres is simple but effective even the outlet it's plugged into of it has spares is better then before. The ps audio power plants work wonders on video and good for the front end
    I feel no power regen or power cond , I iso are good for amps if they are large
    in my place I made a 20 kw balanced iso
    ground isolated from my home. This was good until I bought my ML NO 33 amps. Between them and 2 2000 watt woofer tower amps I felt it was holding things back.
    One caviate is an iso that useses a 230 volt input to 120 volt output has an advantage st lower dc on the mains.
    Okay. Good to know.
    Bud

    Lumin X1
    Sony XA-5400ES SACD
    Pass XP-22 pre, X600.5 amps
    Magico S5 MKII Mcast Rose speakers, SPOD spikes

    Shunyata Triton v3/Typhon QR for preamp, Denali 2000 (2) for amps
    Shunyata Sigma XLR analog ICs, Sigma speaker cables
    Shunyata Sigma HC (2), Sigma Analog, Sigma Digital, Z Anaconda (3) power cables

    Mapleshade Samson V.3 four shelf solid maple rack, Micropoint brass footers
    Three 20 amp circuits.

  8. #6
    Senior Member
    Join Date
    May 2017
    Location
    Cleveland, Ohio, USA
    Posts
    234
    Post Thanks / Like

    Re: Shunyata Denali and HD TV

    An isolated ground connection to Planet Earth is:
    a] bad news
    b] not permitted by code
    c] dangerious
    All connections to Planet Earth need to be interconnected.

  9. #7
    Senior Member
    Join Date
    Jan 2014
    Location
    USA , NYC
    Posts
    378
    Post Thanks / Like

    Re: Shunyata Denali and HD TV

    Quote Originally Posted by Speedskater View Post
    An isolated ground connection to Planet Earth is:
    a] bad news
    b] not permitted by code
    c] dangerious
    All connections to Planet Earth need to be interconnected.
    not to push back on code enforcement , but this method is used in data centers and hospitals.
    Having said this it's my intention to provide a safe path to better sound.
    Isolating the ground path from all else non audio provides a clear improvement.
    The system is still grounded and in fact of you followed my plan and used a DVM to your house ground plain it would still show as being grounded.
    Due to the fact it's center tap is bonded to ground to make it a neutral.
    This methods is what nuetrek does except they continue the input
    ground and carry it over after the iso power side.

    Balance power is big in countries that don't have a true neutral or Starr grounding methods
    some use methods that kill sound in audio
    lastly some high end makers have a balanced iso as part of there internal psu. So please explain where I went wrong ??
    Thank you in advance
    al
    TUBEZATOR

    preamp ML26
    amps ML No.33
    Bespoke Windows Server 2016 server with AO
    Infinity IRS-V speakers with Xover redone by Arie Nudell.
    Dac lampi Pac and GG2.