Welcome to the AudioShark Forums.
Results 1 to 39 of 39
  1. #1
    Senior Member
    Join Date
    Nov 2013
    Posts
    200

    Lumin d2 display issues

    My D2 is having issues with the display. It doesn't always turn on once powered up. It takes turning on and off the power numerous times before it ( the display) finally comes on. There is nothing wrong with the power cord as the Ethernet port shows it is receiving a signal (blinking green light shows that the Ethernet port is working) but yet the display isn't on. In settings I have the display set to never turn off. Any thoughts as to whats wrong?
    INDUSTRY AFFILIATION: OWNER/PRESIDENT OF
    QUINTESSENCE ACOUSTICS
    www.quintessenceacoustics.com

  2. #2
    Senior Member
    Join Date
    Jan 2020
    Location
    Argentina
    Posts
    193

    Re: Lumin d2 display issues

    That is strange..!!!

    First time I read something about display problem or problems with D2.

    Hope you can solve it soon.
    McIntosh C302 + C2600 - Lumin A1 - Lenco L75 - Marantz SR6007 - Paradigm S6 - Gaia II - Chord Epic Twin Speaker Cable + Jumpers - Bada LB5500

  3. #3
    Senior Member
    Join Date
    Nov 2016
    Location
    Boise
    Posts
    291

    Re: Lumin d2 display issues

    Have you tried a reset by taking a pin and putting it in the hole labeled reset on the back panel? I’m not sure it’ll fix your problem but that’s what I would do if it were mine.
    Gary
    Main: Lumin A1, Accuphase E-650, Tannoy Canterbury GR, Shunyata, Audience
    Secondary: Lumin M1, Linton Heritage, Shunyata, Audience

  4. #4
    Senior Member
    Join Date
    Jul 2014
    Location
    Hong Kong
    Posts
    3,076

    Re: Lumin d2 display issues

    Even if the display is not showing anything, can Lumin app see the D2 on network and play normally 30 seconds after it boots up?

    Are you using a third party LPS?
    Peter Lie
    LUMIN Firmware Lead

  5. #5
    Senior Member
    Join Date
    Nov 2013
    Posts
    200

    Re: Lumin d2 display issues

    Quote Originally Posted by wklie View Post
    Even if the display is not showing anything, can Lumin app see the D2 on network and play normally 30 seconds after it boots up?

    Are you using a third party LPS?
    The LUMIN app doesn’t see the D2 when this happens. I am not using a third party LPS.
    INDUSTRY AFFILIATION: OWNER/PRESIDENT OF
    QUINTESSENCE ACOUSTICS
    www.quintessenceacoustics.com

  6. #6
    Senior Member
    Join Date
    Jul 2014
    Location
    Hong Kong
    Posts
    3,076

    Re: Lumin d2 display issues

    Since your account does not seem to accept PM, please send e-mail to info@luminmusic.com
    Peter Lie
    LUMIN Firmware Lead

  7. #7
    Senior Member
    Join Date
    Nov 2013
    Posts
    200

    Re: Lumin d2 display issues

    I sent you an email at info@luminmusic.com

    Thanks in advance for your assistance...
    INDUSTRY AFFILIATION: OWNER/PRESIDENT OF
    QUINTESSENCE ACOUSTICS
    www.quintessenceacoustics.com

  8. #8
    Member
    Join Date
    Dec 2019
    Location
    Italy
    Posts
    41

    Re: Lumin d2 display issues

    Hi Peter,

    I have the same identical problem.

    At the beginning, after some on/off the Lumin D2 started .

    Now the lan's led are on but the Lumin D2 won't boot. Reset doesn't work.
    Giuliano

    Main:
    Kuzma Stabi R - 4 Point 14 inch, Simaudio Moon 740P - Moon 860A v2, Aqua LinQ, Aqua Formula xHD
    Spendor D9.2, Analysis Plus Silver Apex

    Secondary:
    Lumin U1 - X1 Psu, Aqua La Scala MK2, Benchmark AHB2, Magnepan .7

  9. #9
    Senior Member
    Join Date
    Jul 2014
    Location
    Hong Kong
    Posts
    3,076

    Re: Lumin d2 display issues

    Sent a PM to you.
    Peter Lie
    LUMIN Firmware Lead

  10. #10
    Junior Member
    Join Date
    Jun 2021
    Location
    Netherlanfs
    Posts
    1

    Re: Lumin d2 display issues

    Having the Lumin D2 for over a year I noticed same issue with display.
    (I had connected th D2 to an Sbooster wich gave to my ears better performance)
    ' Playin' with the on and off switch from the Sbooster solved the display problem now and then.
    Recently I ordered the remote control (not so cheap) and switched the Lumin on and off by the remote.That worked fine for 1 to 2 months but then the same display issue came back.
    My simple guess is that there maybe some hardware weakness in the product.
    Fortunately I also own an Auralic so I can
    still stream music. (but I liked the sound signature of the D2 a bit more)

  11. #11
    Senior Member
    Join Date
    Mar 2014
    Location
    Ormond Beach, Plantation Bay CC
    Posts
    5,172

    Re: Lumin d2 display issues

    Well my D1 in the other room had a similar problem and after getting with Peter it turned out it was the power supply that was going bad. Ordered a similar spec'd supply, problem resolved. It was intermittent flaky until the Lumin would not turn on at all.
    2chl : Vincent Sp331MkII, W4S STP-SE Stage 2, Kef 201/2, KEF 140, Vapor Breeze, Lumin, Bryston CD, BHA-1, Quicksilver Headamp, HD650, HD800s, HD820's, Dan Clark 1.1, Focal Stellia, OPPO 203, 105. ( Boxed up: Pass Xa-30.5, VPI Classic, Dynavector DV-20XL, Manley Chinook, Cadenza Bronze)

  12. #12
    Member
    Join Date
    Jun 2018
    Location
    Tokyo
    Posts
    62

    Re: Lumin d2 display issues

    Hi Peter,

    I have the similar problem on my Lumin D2 after using 3 years

    Now the lan's led are on but the Lumin D2 won't boot. Reset doesn't work. I am not using a third party LPS. I checked it Fuse, looks clean

    Any thoughts as to whats wrong?

  13. #13
    Senior Member
    Join Date
    Jul 2014
    Location
    Hong Kong
    Posts
    3,076

    Re: Lumin d2 display issues

    Please check PM
    Peter Lie
    LUMIN Firmware Lead

  14. #14
    Junior Member
    Join Date
    Oct 2021
    Location
    Lemont
    Posts
    2

    Re: Lumin d2 display issues

    I have a Lumin D1 .. same issue. I did swap to a Sbooster Power supply. It didn’t resolve the issue. I looked at the specs on the original power brick and it’s a 4 Amp power supply.. I don’t know if the Sbooster has enough current output

  15. #15
    Senior Member
    Join Date
    Jul 2014
    Location
    Hong Kong
    Posts
    3,076

    Re: Lumin d2 display issues

    For troubleshooting D1, please try another SMPS like the factory 12V 4A power supply, but not an LPS. An alternative compatible brand is Meanwell 12V 5.5mm x 2.1mm.
    Peter Lie
    LUMIN Firmware Lead

  16. #16
    Junior Member
    Join Date
    Oct 2021
    Location
    Lemont
    Posts
    2

    Re: Lumin d2 display issues

    Thanks Peter just ordered one this AM.
    Tom

  17. #17
    Junior Member
    Join Date
    Nov 2021
    Location
    Colorado
    Posts
    3

    Re: Lumin d2 display issues

    Quote Originally Posted by jpeg View Post
    Hi Peter,

    I have the similar problem on my Lumin D2 after using 3 years

    Now the lan's led are on but the Lumin D2 won't boot. Reset doesn't work. I am not using a third party LPS. I checked it Fuse, looks clean

    Any thoughts as to whats wrong?
    Hi folks,
    I am having a similar problem. The app on my iPhone or iPad won’t recognize the Lumin D2 and the display won’t come on. The Ethernet lights blink, the fuse is good, the power cord is good but the Lumin display is not working. I haven’t had any problems prior to today and all of a sudden I get nothing.
    In the app I cannot access my Qobuz account either if that might be a clue? I tried to contact wklie for some assistance but I’m a new member and don’t have permission yet to do pm’s yet.
    If you folks came up with a solution I would love to know how you fixed it. Thanks for any advice!
    Erik

  18. #18
    Senior Member
    Join Date
    Nov 2013
    Posts
    200

    Re: Lumin d2 display issues

    Quote Originally Posted by ErikL View Post
    Hi folks,
    I am having a similar problem. The app on my iPhone or iPad won’t recognize the Lumin D2 and the display won’t come on. The Ethernet lights blink, the fuse is good, the power cord is good but the Lumin display is not working. I haven’t had any problems prior to today and all of a sudden I get nothing.
    In the app I cannot access my Qobuz account either if that might be a clue? I tried to contact wklie for some assistance but I’m a new member and don’t have permission yet to do pm’s yet.
    If you folks came up with a solution I would love to know how you fixed it. Thanks for any advice!
    Erik
    Mine was eventually repaired by the US IMPORTER. I don’t recall what specifically was replaced/repaired, but they had to put in a new board. I suggest you contact them directly. I don’t have their number, but I am sure someone here has it.
    INDUSTRY AFFILIATION: OWNER/PRESIDENT OF
    QUINTESSENCE ACOUSTICS
    www.quintessenceacoustics.com

  19. #19
    Junior Member
    Join Date
    Nov 2021
    Location
    Colorado
    Posts
    3

    Re: Lumin d2 display issues

    Thanks MRJAZZ!
    I was hoping it was something simple I could fix. I’ve got my fingers crossed! Kind of a bummer if it requires outside service as I’m out of warranty.
    Regards
    Erik

  20. #20
    Senior Member
    Join Date
    Jul 2014
    Location
    Hong Kong
    Posts
    3,076

    Re: Lumin d2 display issues

    Erik, please check PM.
    Peter Lie
    LUMIN Firmware Lead

  21. #21

    Re: Lumin d2 display issues

    Add me to the list
    My D2 died just yesterday
    I live in Canada and am not sure what to do
    Substituted an old Sonos Connect for now

  22. #22
    Senior Member
    Join Date
    Jul 2014
    Location
    Hong Kong
    Posts
    3,076

    Re: Lumin d2 display issues

    Please check PM.
    Peter Lie
    LUMIN Firmware Lead

  23. #23
    Junior Member
    Join Date
    Nov 2021
    Location
    Colorado
    Posts
    3

    Re: Lumin d2 display issues

    The service center in California repaired my D2 in about a week. Works like new again. I was out of warranty and while it wasn’t exactly cheap, the repair was much cheaper than a new streamer/dac.

  24. #24
    Junior Member
    Join Date
    Dec 2021
    Location
    Toronto, Canada
    Posts
    5

    Re: Lumin d2 display issues

    Quote Originally Posted by Croctor View Post
    Add me to the list
    My D2 died just yesterday
    I live in Canada and am not sure what to do
    Substituted an old Sonos Connect for now
    Add another Canadian resident to the list. My D2 intermittently does not want to boot. Hoping to find a solution before it dies.

    Regards,
    Dan

  25. #25
    Junior Member
    Join Date
    Dec 2021
    Location
    Toronto, Canada
    Posts
    5

    Re: Lumin d2 display issues

    Lumin distributor tells me it's either the PS or main board. Main board is $500USD to replace.

    Does anyone know which one has failed in this instance?

    Regards,
    Dan

  26. #26
    Junior Member
    Join Date
    Apr 2022
    Location
    San Francisco California
    Posts
    1

    Re: Lumin d2 display issues

    Hi
    I have similar problem my d2 display not working do you know repair shop address pls..send to me . I live in San Francisco CA
    Thanks
    Moe🙏

  27. #27
    Senior Member
    Join Date
    Jul 2014
    Location
    Hong Kong
    Posts
    3,076

    Re: Lumin d2 display issues

    For repair, please contact your dealer or regional distributor here:
    LUMIN - Purchase
    Peter Lie
    LUMIN Firmware Lead

  28. #28
    Junior Member
    Join Date
    Nov 2022
    Location
    Hungary
    Posts
    1

    Re: Lumin d2 display issues

    Dear All

    I have read the forum regarding Lumin d2 boot issue. Unfortunately i have a similar problem.
    Everything original, power cord and fuse is ok, and yesterday this was worked perfectly.
    But today doesn’t working, the display dark and blank, the reset button doesn’t working The player not found by the application.

    I hope you know any tricks or solutions before I call the service. I’m afraid that the service will be very expensive for me.

    Thank you in advance for your support!

  29. #29
    Junior Member
    Join Date
    Dec 2021
    Location
    Toronto, Canada
    Posts
    5

    Re: Lumin d2 display issues

    Quote Originally Posted by wklie View Post
    For repair, please contact your dealer or regional distributor here:
    LUMIN - Purchase
    I was very lucky. I had the same problem and sent it in for service. Lumin was very good to me and only charged a minimal fee to fix mine.

    Regards,
    Dan

  30. #30

    Re: Lumin d2 display issues

    Hi Peter

    I am also experiencing the same problem with my Lumin D2, I switched off and on the power several times, and it still doesn't come back up alive. Switched the power cord as well, still the same. I live in Canada.

    Thanks

    Harry
    Magico A3, Pass Labs INT-250, Lumin D2, Bryston BDA-3, Oppo BDP-203
    Harbeth P3ESR, Harbeth M30.2XD, Luxman L-509X, Primare SPA21, Hifirose RS150B

  31. #31
    Junior Member
    Join Date
    Dec 2021
    Location
    Toronto, Canada
    Posts
    5

    Re: Lumin d2 display issues

    Quote Originally Posted by klipschman70 View Post
    Hi Peter

    I am also experiencing the same problem with my Lumin D2, I switched off and on the power several times, and it still doesn't come back up alive. Switched the power cord as well, still the same. I live in Canada.

    Thanks

    Harry
    Harry,

    Pm me if you like. Lumin Canada treated me very well when I had the same problem.

    Regards,
    Dan

  32. #32

    Re: Lumin d2 display issues

    Quote Originally Posted by Tour50 View Post
    Harry,

    Pm me if you like. Lumin Canada treated me very well when I had the same problem.

    Regards,
    Dan
    Thanks Dan. I sent you a PM.

    Best regards

    Harry
    Magico A3, Pass Labs INT-250, Lumin D2, Bryston BDA-3, Oppo BDP-203
    Harbeth P3ESR, Harbeth M30.2XD, Luxman L-509X, Primare SPA21, Hifirose RS150B

  33. #33
    Junior Member
    Join Date
    Dec 2022
    Location
    Sweden
    Posts
    18

    Re: Lumin d2 display issues

    awesome

  34. #34
    Junior Member
    Join Date
    Dec 2022
    Location
    italy
    Posts
    1

    Re: Lumin d2 display issues

    Hi, I'm Italian and I have same problem.
    Do you have solutions ? Power Supply is OK.
    Regards

  35. #35

    Re: Lumin d2 display issues

    I have sent my unit to the distributor for repair and still waiting for the outcome.

  36. #36

    Re: Lumin d2 display issues

    Hi Everyone,

    Does the D2 & U2 Mini share the same power supply? Thinking of getting the U2 Mini but now abit scared after reading this thread.

    Thanks.

  37. #37
    Junior Member
    Join Date
    Nov 2021
    Location
    United States
    Posts
    3

    Re: Lumin d2 display issues

    Hello Peter,

    I am having an issue with the front panel not working/booting when I turn on my D2. I haven't used this unit in 2 years since I purchased my T2 a few years ago. I tried to reset it, but no luck. Also, my network can't find it.

    Any suggestions would be appreciated.

    Best regards,
    Leonard

  38. #38
    Junior Member
    Join Date
    Dec 2021
    Location
    Toronto, Canada
    Posts
    5

    Re: Lumin d2 display issues

    The answers are all the same. Contact your dealer or distributor.

    Regards,
    Dan

  39. #39
    Senior Member
    Join Date
    Mar 2020
    Location
    Detroit area
    Posts
    200

    Re: Lumin d2 display issues

    Folks, not sure if this applies, but I had a frustrating experience when putting my D2 into a newly set up bedroom system after it sat for a while since I upgraded to the T2. I use the phone to control the D2 in the bedroom and the iPad to control the T2 in the main system, and it came down to having different wifi networks auto-joined by the phone and iPad.

    Simply making sure that the LUMINs and all of my iDevices were on the same network solved my problem. Like I said, it might not apply here. If it DOES, Peter or someone who is more tech-savvy than I can explain how to set up your network.

AudioShark - The Best High End Audio Discussion forum.

AudioShark forum is a leading forum site for High End Audio Discussion, Stereo System Discussion, Home Theater System Discussion, Best Home Stereo System Discussion, Home Theater Installation Discussion etc.

The AudioShark forum was created for sharing the passion of high-end Audio. We have Audiophiles from all over the world participating and sharing their knowledge. From novice to experts, you will find a friendly environment for discussing about High End Audio, Stereo System, Home Theater System, Home Stereo System, Home Theater Installation, Amplifiers, Speakers, Subwoofers, Integrated System, Acoustic treatments & Digital Room Corrections and many more.

At AudioShark, we also have incorporated an exciting Marketplace where members can peruse terrific buys on used gear, as well as meet dealers and discuss the purchase of new gear.

We are as crazy about this hobby as you are! So come on in and join us! Audioshark.org the Friendliest Audio Forum!

Industry Participation Disclosure : The owner and administrator of Audioshark is the owner of Suncoast Audio LLC in Sarasota Florida. Suncoast Audio has a full brick and mortar presence in Sarasota with several great show rooms with many world class brands. More information can be found at http://www.suncoastaudio.com

Audioshark is a community of like minded individuals. Audioshark welcomes participation from all manufacturers and owners of all brands and products. It is our belief that online forums provide a community of like minded audiophiles and music lovers to encourage the growth of this wonderful hobby.

Sincerely,
The Audioshark.org Team

Lumin d2 display issues

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •