Thread: How to use Pre-Outs?

To the best of my knowledge, the Boulder 866 does not give you the option of a HT pass-thru input. All of the inputs are standard line-level inputs.

That being said, I would think that to get sound in the manner you've set it up, you would need to adjust the volume knob on both the CXR200 AND the Boulder 866. The CXR200 to get an actual signal to come out of the pre-amp (but not so loud that it overloads the input on the Boulder) and then the Boulder so that the sound comes out of the speaker terminals.

I would contact Boulder and see if they have any suggestions for rigging up a HT pass-thru input-like setting without actually having an HT pass-thru input.

You should be getting sound, I suspect a setting in the TV or Cambridge needs to be checked.

The 866 would need to be set the the input you are using. Make sure the LG and Cambridge are set to do ARC.

It wouldn't hurt, or shorten, life to box up the Cambridge. You could sell it. You would be betteroff using another digital out to the 866 from the LG.

Welcome to the forums.

Storing the Cambridge should not shorten the life. Either way, if you use it or store it, some capacitors will dry out over time and oxidation will occur on contacts and solder. Before storing you could clean and condition contacts with De-oxit cleaner and then the conditioner.

Originally Posted by Mr Peabody

You should be getting sound, I suspect a setting in the TV or Cambridge needs to be checked.

The 866 would need to be set the the input you are using. Make sure the LG and Cambridge are set to do ARC.

It wouldn't hurt, or shorten, life to box up the Cambridge. You could sell it. You would be better off using another digital out to the 866 from the LG.

Welcome to the forums.

I have done all you are talking about here but still no sound. On shortening the life span, Mumbai weather can be very damaging if I box it up and store it. It's very humid here and rains straight up for 3 months.

Originally Posted by tino27

To the best of my knowledge, the Boulder 866 does not give you the option of a HT pass-thru input. All of the inputs are standard line-level inputs.

That being said, I would think that to get sound in the manner you've set it up, you would need to adjust the volume knob on both the CXR200 AND the Boulder 866. The CXR200 to get an actual signal to come out of the pre-amp (but not so loud that it overloads the input on the Boulder) and then the Boulder so that the sound comes out of the speaker terminals.

I would contact Boulder and see if they have any suggestions for rigging up a HT pass-thru input-like setting without actually having an HT pass-thru input.

Done exactly as you say, but no sound. I have now shot off a mail to Boulder.

Puzzling issue.

3 months of rain, depressing

Originally Posted by Terrible

I have done all you are talking about here but still no sound. On shortening the life span, Mumbai weather can be very damaging if I box it up and store it. It's very humid here and rains straight up for 3 months.