Welcome to the AudioShark Forums.
Page 1 of 2 12 LastLast
Results 1 to 50 of 52
  1. #1

    Do better ethernet cables matter?

    I did a comparison between Blue Jeans Cat 6A and Foundation SX ethernet from Synergistic Research. Here are my thoughts…

    Foundation SX Ethernet Cable Review | Synergistic Research - YouTube
    Reference System:
    Continuum Audio Labs Caliburn, Lyra Etna Lambda
    dCS Rossini APEX DAC, master clock, transport
    Revox PR99 modified by Soren Wittrup, A77 Mark II tape decks
    Audio Research Ref 6SE and Ref Phono 3SE Preamplifiers
    Audio Research Ref 160 Stereo Amplifier
    Wilson Audio Alexia V in Cranberry Pearl and black hardware
    Wilson Audio LoKe subwoofer in Cranberry Pearl and black hardware x 2

  2. #2
    Senior Member
    Join Date
    Apr 2013
    Location
    East Bay, CA
    Posts
    2,428

    Re: Do better ethernet cables matter?

    Q: Do better ethernet cables matter?

    A: Yes.

  3. #3
    Senior Member
    Join Date
    May 2017
    Location
    Ohio, USA
    Posts
    181

    Re: Do better ethernet cables matter?

    Especially when you post it six times.
    Electronics: Pass Labs XP-22, Pass Labs X250.8
    Digital: T+A DAC 200, Auralic Aries G1, Sony UBP-X800M
    Analog: Pro-Ject X2 w/ Ortofon 2M Black, iFi Phono3 Phonostage
    Speakers: Janszen Audio Valentina P8, SVS SB13-Ultra
    Other: David Laboga Custom Audio/Shunyata/Audioquest cabling, PS Audio PowerPlant 15

  4. #4
    Senior Member
    Join Date
    Oct 2022
    Location
    Texas
    Posts
    1,266

    Re: Do better ethernet cables matter?

    This is one of those topics that no amount of analysis or topics will make a difference.

    I had read so many strong view points on both sides that I finally - as somewhat of a skeptic on ethernet cables myself - went out an bought some to hear for myself.

    Yup - there was a very noticeable difference between some, and not so noticeable difference on the others. And more money didn't always equate to better. I am testing one a mfg sent me now that is $1500 and I'm not impressed.

    This is one of those topics where people with poor hearing, crappy systems or have never tried it themselves will violently swear there is no difference, while the other half will know better.
    "We are all billionaires because of the huge piles sweet dough rolling in from our participation in the ongoing campaign to suck your collective brains through a stirrer-straw." - PTA Editorial Staff

  5. #5
    Senior Member
    Join Date
    Jan 2014
    Location
    Bluffton SC
    Posts
    772

    Re: Do better ethernet cables matter?

    Less is more Lee.
    Main Equipment: Kharma Elegance dB11-S, JL Audio F113v2, Block Audio Line & Mono SE Amplification, Bricasti M21 DAC, Antipodes Kala K-50 Server, ClearAudio Performance SE, Satisfy Arm & Maestro Wood MM Cartridge
    Power: 3 x 20 Amp Lines, Shunyata Everest 8000, Sigma XC v2, Shunyata Sigma v2 NR, Block Audio Power Cords, Defender, ADDPowr Wizard
    Grounding: Shunyata Altaira CGS - Alpha CGS cables
    Network : Supra Cat 8+, Twin (Nenon Modified) Buffalo GS2016 Switches powered with Keces P3 LPSU,
    Cables: Wireworld Platinum Starlight 8 USB, Wireworld Platinum Eclipse 8 SCs, 1M & 6M Tubulus Concentus ICs,
    Other: PSI Audio AVAA C20, Isoacoustics GAIA I footers Kharmas, GIK/Vicoustics/Stillpoint Apertures, Stillpoint Ultra SS, Furutech GTX - Gold outlets, Adona Rack

  6. #6

    Re: Do better ethernet cables matter?

    Quote Originally Posted by tino27 View Post
    Especially when you post it six times.
    Exactly! Maybe a moderator can delete the other repeated threads...

  7. #7
    Audioshark
    Join Date
    Apr 2013
    Location
    Sarasota, FL
    Posts
    30,107

    Re: Do better ethernet cables matter?

    Quote Originally Posted by nicoff View Post
    Exactly! Maybe a moderator can delete the other repeated threads...
    Done.


    Sent from my iPhone using Tapatalk Pro
    My Systems: http://www.audioshark.org/showthread...481#post158481

    "We can hear everything we measure, but we can't measure everything we hear. Let your ears be your guide."

    Dealer for: Aqua Hi-Fi, Aurender, AudioQuest Cables & Power Products, Berkeley Audio, Block Audio (distributor), Boulder Amplifiers, Bowers & Wilkins (B&W), Bryston, Clarisys Audio Loudspeakers (distributor), Classe’ Audio, Degritter Record Cleaning Machines, Esoteric, Finite Elemente, FirstWatt, Focal Loudspeakers and Headphones, GigaFoil, Harbeth Loudspeakers, Hegel, HiFi Man, Innuos, ISO Acoustics, Keces Power Supplies, Kharma Loudspeakers and Electronics, Kuzma Turntables, Lumin, Luxman, Magico Loudspeakers, MBL Speakers & Electronics, MSB Technologies, MySonicLabs Phono Cartridges, Nordost Cables, Ortofon, Pass Labs, Quadraspire, Rega Turntables and Electronics, Shunyata Research, STAX, Stein Music Products, Stillpoints, Soulution, VAC, Vicoustics, Viva Audio, VPI Industries, WireWorld Cables.

    https://suncoastaudio.com/
    Phone: 941-932-0282
    Facebook: https://www.facebook.com/Suncoast-Au...1105178279194/

  8. #8
    Senior Member
    Join Date
    Nov 2013
    Location
    SE Pa
    Posts
    2,044

    Re: Do better ethernet cables matter?

    Quote Originally Posted by Lee Scoggins View Post
    I did a comparison between Blue Jeans Cat 6A and Foundation SX ethernet from Synergistic Research. Here are my thoughts…

    Foundation SX Ethernet Cable Review | Synergistic Research - YouTube
    I stopped watching when the guy said , " at least the folks I hang out with" ......
    Cheers ! …. Dave

  9. #9
    Senior Member
    Join Date
    Nov 2013
    Location
    SE Pa
    Posts
    2,044

    Re: Do better ethernet cables matter?

    Quote Originally Posted by Puma Cat View Post
    Q: Do better ethernet cables matter?

    A: Yes.
    Stephen, elaborate on 'better' , for many audiophiles will equate that to $$ spent.
    Cheers ! …. Dave

  10. #10
    Senior Member
    Join Date
    Apr 2013
    Location
    East Bay, CA
    Posts
    2,428

    Re: Do better ethernet cables matter?

    Quote Originally Posted by Mikado463 View Post
    Stephen, elaborate on 'better' , for many audiophiles will equate that to $$ spent.
    Better, as in, they sound better. Doesn't always equate to $$ spent. In 2019, when I was doing a competitive benchmarking of various Ethernet cables*, and remember one evening after I swapped out an AQ Vodka ether (which is a very nice-sounding cable) for an entry-level Shunyata Research (SR) Venom, and the Venom was so much better I burst out laughing...wasn't even close. I then had an audio buddy over for a blind eval, and when I replaced the AQ Vodka with an SR Alpha, he burst out, "Who took the kink out of the hose?"

    *-Ethernet cables evaluated in my competitive benchmarking: Belden Cat6A, Audioquest Cinnamon, Wireworld Starlight Cat 8, Supra Cat 8, Audioquest Vodka, Shunyata Venom and Alpha.

    The new Venom-X Ethernet is a terrific sounding Ethernet at it's price point. For a "budget cable", I like the Supra Cat 8 though it can be a skosh bright on some recordings (depending on their mastering).

    BTW, for digital cables, the length really has an impact on audio quality (this is due to the impact of the interaction of length x EM wave reflections on the cable); a minimal length of 1.5M is recommended for best audio quality.

  11. #11

    Re: Do better ethernet cables matter?

    Quote Originally Posted by Mikado463 View Post
    Stephen, elaborate on 'better' , for many audiophiles will equate that to $$ spent.
    You got it! 😃

  12. #12
    Senior Member
    Join Date
    Nov 2013
    Location
    Colorado
    Posts
    1,963

    Re: Do better ethernet cables matter?

    Yes, IMO they do...and they don't always have to cost a fortune.

    Cheers,

    Mike
    Avanti Audio

    arc sp-11 or ls27 | arc d130 | vpi classic 2 w/periphery ring w/Si3N4 bearing & sapphire thrust plate & 2x jmw 10.5i | phoenix engineering eagle & road runner | ortofon cadenza bronze, miyajima zero mono | sentec eq11 w/ Sylvania 5751 TMBP & CBS 7318 | auditorium a23 | canton ref 9 dc | 2x m&k v125 | oppo bdp-95 | chord qutest | lumin d1 & sbooster | avanti audio vivace cables

  13. #13
    Senior Member
    Join Date
    Nov 2013
    Location
    Minnesota
    Posts
    1,369

    Re: Do better ethernet cables matter?

    I have no doubt that they make a difference. I have tried different SATA cables in my music computer and they sound remarkably different.
    My Gear- Mains System-Pass X250 amp, BAT VK-51se preamp, Luxman DA-06 DAC, Magnepan 1.6's, Thorens TD-145 TT, Dual Martin Logan Subs, Vintage Luxman T-110 Tuner, Cables-WW Platinum 7 USB, Cardas Parsec XLR, AQ Columbia DBS 72v XLR, Belden 8402 XLR.

  14. #14

    Re: Do better ethernet cables matter?

    Quote Originally Posted by tino27 View Post
    Especially when you post it six times.
    Yikes! I only posted it once so not sure what happened here. An accidental spamming I guess…
    Reference System:
    Continuum Audio Labs Caliburn, Lyra Etna Lambda
    dCS Rossini APEX DAC, master clock, transport
    Revox PR99 modified by Soren Wittrup, A77 Mark II tape decks
    Audio Research Ref 6SE and Ref Phono 3SE Preamplifiers
    Audio Research Ref 160 Stereo Amplifier
    Wilson Audio Alexia V in Cranberry Pearl and black hardware
    Wilson Audio LoKe subwoofer in Cranberry Pearl and black hardware x 2

  15. #15

    Re: Do better ethernet cables matter?

    Quote Originally Posted by Mikado463 View Post
    I stopped watching when the guy said , " at least the folks I hang out with" ......
    I could have phrased it better but what I meant was a group of audiophiles that like to try new gear. As opposed to those with closed minds.
    Reference System:
    Continuum Audio Labs Caliburn, Lyra Etna Lambda
    dCS Rossini APEX DAC, master clock, transport
    Revox PR99 modified by Soren Wittrup, A77 Mark II tape decks
    Audio Research Ref 6SE and Ref Phono 3SE Preamplifiers
    Audio Research Ref 160 Stereo Amplifier
    Wilson Audio Alexia V in Cranberry Pearl and black hardware
    Wilson Audio LoKe subwoofer in Cranberry Pearl and black hardware x 2

  16. #16
    Senior Member
    Join Date
    Apr 2013
    Location
    East Bay, CA
    Posts
    2,428

    Re: Do better ethernet cables matter?

    Quote Originally Posted by Mechnutt View Post
    I have no doubt that they make a difference. I have tried different SATA cables in my music computer and they sound remarkably different.
    In my experience, many things make a difference. I can hear the impact of temperature and barometric pressure changes. At the end of the day, it's a system mediating a transfer function, y=f(x), which is comprised of the influence and interactions of control factors and noise factors, including the room, power, amplification and transduction gear, vibration damping, environment, power, noise (ambient, ground-plane, and "variance"-based noise e.g. jitter, etc.) on the final result. So while it is very true, as Nelson has said, our ears are not a microphone and our brain is not a tape recorder, we can easily distinguish the influence and the interaction of these factors in the reproduction of music. I wasn't aware of this until I started reading more about digital music reproducton, but in doing that research, I've learned, that when listening to music, our brains can distinguish timing errors in the picosecond domain; this is why our digital devices beneft from femtoclocks. This is likely why many folks still prefer analog recordings, because there are no timing errors in analog reproduction.

  17. #17
    Senior Member
    Join Date
    Nov 2013
    Location
    Minnesota
    Posts
    1,369

    Re: Do better ethernet cables matter?

    I am going to install a JCat usb card that is supposed to make a huge difference. I will report back next week.
    My Gear- Mains System-Pass X250 amp, BAT VK-51se preamp, Luxman DA-06 DAC, Magnepan 1.6's, Thorens TD-145 TT, Dual Martin Logan Subs, Vintage Luxman T-110 Tuner, Cables-WW Platinum 7 USB, Cardas Parsec XLR, AQ Columbia DBS 72v XLR, Belden 8402 XLR.

  18. #18
    Senior Member
    Join Date
    Apr 2013
    Location
    East Bay, CA
    Posts
    2,428

    Re: Do better ethernet cables matter?

    Quote Originally Posted by Mechnutt View Post
    I am going to install a JCat usb card that is supposed to make a huge difference. I will report back next week.
    Heard good things about those...

  19. #19
    Senior Member
    Join Date
    Oct 2019
    Location
    The Netherlands
    Posts
    260

    Re: Do better ethernet cables matter?

    Quote Originally Posted by Mikado463 View Post
    Stephen, elaborate on 'better' , for many audiophiles will equate that to $$ spent.
    I buy these ethernet cables from aliexpress. There are really nice cables there between the standard bulk. They are cat 8, twisted, made of tinned copper, double aluminium shielded and have a copper gold plated head. I don't see many things that an audio cable can do better, and it only costs 20.69 euro for a 3 metre cable.

    Why buying network cables for 1500 bugs if there are much cheaper versions on the market which are awesome.

    I agree with you, high end network cables don't have to be expensive.

  20. #20
    Senior Member
    Join Date
    Apr 2013
    Location
    East Bay, CA
    Posts
    2,428

    Re: Do better ethernet cables matter?

    Quote Originally Posted by Alkyogre View Post
    I buy these ethernet cables from aliexpress. There are really nice cables there between the standard bulk. They are cat 8, twisted, made of tinned copper, double aluminium shielded and have a copper gold plated head. I don't see many things that an audio cable can do better, and it only costs 20.69 euro for a 3 metre cable.

    Why buying network cables for 1500 bugs if there are much cheaper versions on the market which are awesome.

    I agree with you, high end network cables don't have to be expensive.
    If the Ethernet cable shields are connected at both ends, they can pass low- and high-source impedance leakage current, which can have audible negative impact on audio quality. One of the problems it causes is threshold jitter (not the same thing as deterministic jitter), which impacts timing, which our brains are exquisitly sensitive to when listening to music†. It is also important to mitigate common-mode noise on Ethernet cables, which also has a negative impact on audio quality. This leakage current often occurs from using SMPS, which is why clean, quiet linear power supplies are so important for digital music reproduction.

    Common-mode noise:
    The effect is caused by rapid voltage changes at switching nodes in the circuit, pumping current through stray capacitances into the local input and/or output ground or power return, making the connection jump in voltage due to its self-impedance.

    This is exactly what is occuring in digital music reproduction, where the signal which is NOT 0's and 1's but is comprised of analog square wave voltages, usually from 0 to 2V (representing the "0" and "1" from the digital source music file).

    Moreover, there's a common misconception that the noise rides "down low" at the "noise floor" of the signal. This is not true, the noise rides ON TOP of the signal. This is why it's important to mitigate the impact of both low- and high-source impedance leakage current, and common-mode noise.

    This is what is REALLY going on...


    †-read this white paper by professional Ethernet engineer, John Swenson, who designed the EtherREGEN: https://cdn.shopify.com/s/files/1/06...f?v=1583429386

  21. #21
    Member
    Join Date
    Mar 2021
    Location
    Toronto
    Posts
    75

    Re: Do better ethernet cables matter?

    Do better ethernet cables matter?

    Is that a rhetorical question, or a real invite to alternate viewpoints? (It's just that opinions that aren't "of course it matters" often aren't really welcome in some forums).

    Quote Originally Posted by Lee Scoggins View Post
    I did a comparison between Blue Jeans Cat 6A and Foundation SX ethernet from Synergistic Research. Here are my thoughts…

    Foundation SX Ethernet Cable Review | Synergistic Research - YouTube
    The mention of SR stuff is already a red flag for me.

    I didn't find the "I heard a difference between ethernet cables under the standard sighted conditions" particularly convincing on the matter.

    Given this is technically controversial territory, since audiophiles are at least as prone as other human beings to imagining differences, I'd ask:

    Is there any reason you did not, or could not control for sighted bias?

    If it altered the signal audibly did you measure these differences?

    It's no problem of course if anyone wants to buy in to reviews like this. I still use subjective reviews of some equipment myself. On the other hand, it seems the demand is increasing by many audiophiles for more rigorous evidence than the old Golden Ear-type testimonials, which is making this type of review...especially of this type of controversial audio gear...start looking a bit old in the tooth. And that comes from a long time Absolute Sound reader. But...the guys who can actually measure the claims of audio companies are nipping at your heels.

  22. #22
    Senior Member
    Join Date
    Apr 2014
    Location
    Southern Ontario
    Posts
    319

    Re: Do better ethernet cables matter?

    Quote Originally Posted by MattHooper View Post
    Do better ethernet cables matter?

    Is that a rhetorical question, or a real invite to alternate viewpoints? (It's just that opinions that aren't "of course it matters" often aren't really welcome in some forums).



    The mention of SR stuff is already a red flag for me.

    I didn't find the "I heard a difference between ethernet cables under the standard sighted conditions" particularly convincing on the matter.

    Given this is technically controversial territory, since audiophiles are at least as prone as other human beings to imagining differences, I'd ask:

    Is there any reason you did not, or could not control for sighted bias?

    If it altered the signal audibly did you measure these differences?

    It's no problem of course if anyone wants to buy in to reviews like this. I still use subjective reviews of some equipment myself. On the other hand, it seems the demand is increasing by many audiophiles for more rigorous evidence than the old Golden Ear-type testimonials, which is making this type of review...especially of this type of controversial audio gear...start looking a bit old in the tooth. And that comes from a long time Absolute Sound reader. But...the guys who can actually measure the claims of audio companies are nipping at your heels.
    Ethernet cables, AC cords, and cables in general have never -- even subjectively -- made any noticeable difference for me. Only rigorous bind testing could ever convince me that there are audible difference among cables.

    "Digital" signals are indeed analog as are analog audio signals. But whereas, conceptually at least, in the latter case there is no upper limit to desirability of perfection, that is not the case for "digital" signals. Digital signals only have to be "good enough".

    I'm not a "sound difference denier" myself but I do believe that a very many differences perceived by subjectivist audiophiles are best explained by their imagination.
    ~ Bill

    Win10/Foobar2000 => Topping D90 DAC => Sonic Frontiers Line 1 SE+ preamp => VTV Purifi 1ET400A stereo amp with Sparkos SS3602 op amps => Zaph Audio ZRT speakers (DIY) + PSB Subsonic 5 subwoofer

  23. #23

    Re: Do better ethernet cables matter?

    Quote Originally Posted by Feanor View Post
    Ethernet cables, AC cords, and cables in general have never -- even subjectively -- made any noticeable difference for me. Only rigorous bind testing could ever convince me that there are audible difference among cables.

    "Digital" signals are indeed analog as are analog audio signals. But whereas, conceptually at least, in the latter case there is no upper limit to desirability of perfection, that is not the case for "digital" signals. Digital signals only have to be "good enough".

    I'm not a "sound difference denier" myself but I do believe that a very great deal differences perceived by subjectivist audiophiles ar best explained by their imagination.
    Sure sounds like you are 100% a "sound difference denier."
    Micro Seiki SX-8000 air bearing table, SME 312s arm, SME 3012R arn, Dynavector XV-1s cartridge, Lyra Etna SL cartridge, ARC Ref 3 phono stage, Otari MX-55 2 track R2R, Ampex 350 tape repros, Roon Nucleus Plus music server, HiFi Rose 150B DAC, ARC Ref 6, ARC Ref 75 with KT-150s, Parasound JC5 amp , JBL 4345 speakers, Viero Equilibro Level 3 speaker cables, and Definitive Technology Ref subs.

    Reviewer for Positive Feedback

  24. #24
    Senior Member
    Join Date
    Apr 2014
    Location
    Southern Ontario
    Posts
    319

    Re: Do better ethernet cables matter?

    Quote Originally Posted by mep View Post
    Sure sounds like you are 100% a "sound difference denier."
    Not true at all. I certainly have heard differences between amplifiers for example.
    ~ Bill

    Win10/Foobar2000 => Topping D90 DAC => Sonic Frontiers Line 1 SE+ preamp => VTV Purifi 1ET400A stereo amp with Sparkos SS3602 op amps => Zaph Audio ZRT speakers (DIY) + PSB Subsonic 5 subwoofer

  25. #25

    Re: Do better ethernet cables matter?

    Quote Originally Posted by Feanor View Post
    Not true at all. I certainly have heard differences between amplifiers for example.
    So it's only cables?
    Micro Seiki SX-8000 air bearing table, SME 312s arm, SME 3012R arn, Dynavector XV-1s cartridge, Lyra Etna SL cartridge, ARC Ref 3 phono stage, Otari MX-55 2 track R2R, Ampex 350 tape repros, Roon Nucleus Plus music server, HiFi Rose 150B DAC, ARC Ref 6, ARC Ref 75 with KT-150s, Parasound JC5 amp , JBL 4345 speakers, Viero Equilibro Level 3 speaker cables, and Definitive Technology Ref subs.

    Reviewer for Positive Feedback

  26. #26
    Senior Member
    Join Date
    Apr 2014
    Location
    Southern Ontario
    Posts
    319

    Re: Do better ethernet cables matter?

    Quote Originally Posted by mep View Post
    So it's only cables?
    Since you ask, no necessarily just cables. I haven't heard any differences personally from anti-vibration devices and electrical isolation device. But these are things that might be useful in some instances, just not in mine.

    I've mentioned hearing differences between amps; also between preamps and DACs, and for that matter, tubes and op amps. But I have to say that I don't always hear a difference between any two components of a type.
    ~ Bill

    Win10/Foobar2000 => Topping D90 DAC => Sonic Frontiers Line 1 SE+ preamp => VTV Purifi 1ET400A stereo amp with Sparkos SS3602 op amps => Zaph Audio ZRT speakers (DIY) + PSB Subsonic 5 subwoofer

  27. #27
    Senior Member
    Join Date
    Nov 2013
    Location
    St. Louis, MO, USA
    Posts
    3,072

    Re: Do better ethernet cables matter?

    For those who demand measurements how can you be sure there is a way to measure every aspect of sound or audio? More and more evidence is being revealed that many things cannot be measured but have a good explanation as to why they can be heard.
    Aurender ACS10 w/Audioquest Diamond USB, Esoteric N05xd
    Mark Levinson #526, 534 & JBL 4367's
    Clearaudio Performance DC w/Maestro cart
    Clarus Concerto & their Crimson cables

    HT: Marantz AV8003, Linn 5125, JBL SAM3ha, Revel s30,
    SVS PC13 Ultra
    Transparent, Analysis Plus & Tributaries. PS Audio filtering
    Sony XBR-75X940D & BDP
    Parasound P6, MBL 8006b, Artisan speakers/subwoofer

  28. #28
    Senior Member
    Join Date
    May 2013
    Location
    Bucks County PA
    Posts
    3,704

    Re: Do better ethernet cables matter?

    Quote Originally Posted by Mr Peabody View Post
    For those who demand measurements how can you be sure there is a way to measure every aspect of sound or audio? More and more evidence is being revealed that many things cannot be measured but have a good explanation as to why they can be heard.
    And every ear hears differently
    -----------------
    Brian

    Main System -
    Rotel RCD-1572 / Rega P3 > Luxman 505UX Mark II > Fyne Audio F502SPs > Synergistic Cables

    Secondary - OPPO 93 > VAC CLA 1 MKII Pre > Odyssey Stratos > Dynaudio Audience 82s > Tara Labs Cables


  29. #29
    Senior Member
    Join Date
    Apr 2013
    Location
    East Bay, CA
    Posts
    2,428

    Re: Do better ethernet cables matter?

    Quote Originally Posted by Shadowfax View Post
    And every ear hears differently
    "The ear is not a microphone, and the brain is not a tape recorder" – Nelson Pass

  30. #30
    Member
    Join Date
    Mar 2021
    Location
    Toronto
    Posts
    75

    Re: Do better ethernet cables matter?

    Quote Originally Posted by Mr Peabody View Post
    For those who demand measurements how can you be sure there is a way to measure every aspect of sound or audio? More and more evidence is being revealed that many things cannot be measured but have a good explanation as to why they can be heard.
    Examples? And perhaps you are putting the cart before the horse by assuming they can be "heard." Remember, people at a New Age Healing fair will also say "obviously our healing crystals work...too bad science can't explain why yet." This falls in to the problem of presuming something true without having put it to actual rigorous scrutiny to weed out obvious problems like bias.

    If USB and Ethernet cables were as unreliable *in the ways that suggest it requires these expensive cables to fix* my job would be impossible.

    I, along with countless others, work in professional sound (post production in my case) and our stuff is passing through countless USB and Ethernet cables...successfully with no one noting audible problems. Why? Because that's how it works. If you have a cable with the proper specs, competently designed...which is not remotely as expensive as these high end companies charge...the result is just as one would expect. (We had a cable-maker at my last studio...made most of our cables. It didn't take heroic measures, or boutique cable prices, in order for the cables to reliably transmit the same signals; it just took understanding how cables worked and what specs were appropriate for which application).

    That's why many such audiophile shibboleths like these cables are generally laughed at by pros and techies who actually deal with this stuff all day long. It is, at the least, very controversial that boutique USB or ethernet cables will alter the sound.

    So if I'm personally looking to gain insight as to the plausibility of the claim in question, I could be presented with two different routes:

    1. A purely subjective review of the type given in that video by Lee Scoggins. He tells us it's a "myth" that expensive cables don't make a difference. With no evidence. Even stranger, he says that "clearly there is no dispute" at this point that expensive cables make sonic differences in signal wire. And then even wilder: "clearly in power cables I don't think there is any dispute in that."
    Is he kidding? The disputes over whether expensive signal cables, or power cables are likely to make a sonic improvement over cheaper, properly spec'd and built cables never went away! It rages on! In fact, if anything the "nay" side is gaining, as more audiophiles these days seem less willing to buy in to audiophile claims of yore. (See the ascendence of sites like audiosciencereview, and other youtube channels where measurements are becoming more prominant).

    Scoggins sounds like someone in his own audiophile bubble here.

    And then he points out he doesn't come at these claims evaluating as an electrical engineer, in technical terms. Well...not a great start since it's a technical claim. And then...we get subjective impressions clearly taken under circumstances rife for subjective bias.

    On the other hand, I can see a review like this:

    Nordost Tyr 2 Review (USB Cable) | Audio Science Review (ASR) Forum

    By someone who DOES have engineering knowledge, who CAN break down the technical claims, and who can and does use very sensitive equipment to measure any parameters likely to cause audible problems. To little surprise, the expensive cable seems to make zero (plausibly audible) difference from a properly functioning cheap cable. He shows his work. I find this much more compelling than yet another Golden Ear claim to hear differences, when it comes to such controversial areas as this. (And btw, Nordost who whoever could always say "Amir measured the wrong thing...here's the right thing to measure...and HERE are measurements demonstrating our claims. But, curiously, you don't get this usually).

    So, that expresses some of my own thinking on a claim like the one made for the expensive Ethernet cables and such.


    Quote Originally Posted by Shadowfax View Post
    And every ear hears differently
    Yes, and everyone walks differently, but nobody can walk 50mph, and everyone sees differently, but no one can see x-rays, and in the same way everyone hears differently, but no one can hear signals at 35kHz either. We have variation, but also hard limits to our senses. And if
    some measurable distortion is below that threshold...ain't nobody hearing it. That is why humans invent measurement devices in the first place: because of our limitations we invent devices that can detect things we can not (and or more reliably than we can detect).

    Products like the one in the review promise ever lower "noise floors." As if audiophiles are blessed with hearing that has no limit...chasing that "noise floor" down until it disappears in to the background noise of the Big Bang.

  31. #31
    Senior Member
    Join Date
    Mar 2020
    Location
    Detroit area
    Posts
    206

    Re: Do better ethernet cables matter?

    Matt, you make some valid points. But audiosciencereview is Exhibit A for the case of measurements not telling the whole story. By whole story, I mean whether or not a product sounds good. (To me.)

    Shortly after learning of ASR, I looked up a few of my favorite components and guess what - they scored terribly on ASR's measurements. That was enough for me, no need to spend any more time on that site.

    Until there is a set of measurements that when taken together can reliably predict what sounds right to me and prescribe the exact components based on those measurements, I will continue to trust my ears and believe what they tell me.

  32. #32
    Senior Member
    Join Date
    Apr 2014
    Location
    Southern Ontario
    Posts
    319

    Re: Do better ethernet cables matter?

    Quote Originally Posted by JCS123 View Post
    Matt, you make some valid points. But audiosciencereview is Exhibit A for the case of measurements not telling the whole story. By whole story, I mean whether or not a product sounds good. (To me.)

    Shortly after learning of ASR, I looked up a few of my favorite components and guess what - they scored terribly on ASR's measurements. That was enough for me, no need to spend any more time on that site.

    Until there is a set of measurements that when taken together can reliably predict what sounds right to me and prescribe the exact components based on those measurements, I will continue to trust my ears and believe what they tell me.
    IMHO, ASR generally fails to mention, (though sometimes hints at), an aspect of measurement that goes a long way to explain the difference between what looks like nearly perfect measurement at what a lot of people like.

    In fact it isn't really a mystery and has been discussed by various authors of a couple of decades. That is the effect of 2nd and/or 3rd order harmonic distortion on perceived listening quality. It's been know since first recorded mention by Pythagoras about BCE 2500 that a 2nd or 3rd harmonic added to a fundamental note sounds good, fuller, richer, but that higher-order harmonics sound progressively more strident. I and some others subscribe to the theory that 2nd/3rd harmonic distortion not only sounds agreeable to most listeners, but also masks the nasty, higher order harmonics and, probably, also the "grunge" factor of noise.

    So what I'm saying here is that it's useful to look not simply at "THD+noise" or SINAD but also at the harmonic spectrum regularly revealed by ASR-type measurements. I.e., if you read a component review with highish SINAD but which happens to include a high proportion of 2nd/3rd order harmonics, that component might be right up you ally!!
    ~ Bill

    Win10/Foobar2000 => Topping D90 DAC => Sonic Frontiers Line 1 SE+ preamp => VTV Purifi 1ET400A stereo amp with Sparkos SS3602 op amps => Zaph Audio ZRT speakers (DIY) + PSB Subsonic 5 subwoofer

  33. #33

    Re: Do better ethernet cables matter?

    Quote Originally Posted by MattHooper View Post
    Examples? And perhaps you are putting the cart before the horse by assuming they can be "heard." Remember, people at a New Age Healing fair will also say "obviously our healing crystals work...too bad science can't explain why yet." This falls in to the problem of presuming something true without having put it to actual rigorous scrutiny to weed out obvious problems like bias.

    If USB and Ethernet cables were as unreliable *in the ways that suggest it requires these expensive cables to fix* my job would be impossible.

    I, along with countless others, work in professional sound (post production in my case) and our stuff is passing through countless USB and Ethernet cables...successfully with no one noting audible problems. Why? Because that's how it works. If you have a cable with the proper specs, competently designed...which is not remotely as expensive as these high end companies charge...the result is just as one would expect. (We had a cable-maker at my last studio...made most of our cables. It didn't take heroic measures, or boutique cable prices, in order for the cables to reliably transmit the same signals; it just took understanding how cables worked and what specs were appropriate for which application).

    That's why many such audiophile shibboleths like these cables are generally laughed at by pros and techies who actually deal with this stuff all day long. It is, at the least, very controversial that boutique USB or ethernet cables will alter the sound.

    So if I'm personally looking to gain insight as to the plausibility of the claim in question, I could be presented with two different routes:

    1. A purely subjective review of the type given in that video by Lee Scoggins. He tells us it's a "myth" that expensive cables don't make a difference. With no evidence. Even stranger, he says that "clearly there is no dispute" at this point that expensive cables make sonic differences in signal wire. And then even wilder: "clearly in power cables I don't think there is any dispute in that."
    Is he kidding? The disputes over whether expensive signal cables, or power cables are likely to make a sonic improvement over cheaper, properly spec'd and built cables never went away! It rages on! In fact, if anything the "nay" side is gaining, as more audiophiles these days seem less willing to buy in to audiophile claims of yore. (See the ascendence of sites like audiosciencereview, and other youtube channels where measurements are becoming more prominant).

    Scoggins sounds like someone in his own audiophile bubble here.

    And then he points out he doesn't come at these claims evaluating as an electrical engineer, in technical terms. Well...not a great start since it's a technical claim. And then...we get subjective impressions clearly taken under circumstances rife for subjective bias.

    On the other hand, I can see a review like this:

    Nordost Tyr 2 Review (USB Cable) | Audio Science Review (ASR) Forum

    By someone who DOES have engineering knowledge, who CAN break down the technical claims, and who can and does use very sensitive equipment to measure any parameters likely to cause audible problems. To little surprise, the expensive cable seems to make zero (plausibly audible) difference from a properly functioning cheap cable. He shows his work. I find this much more compelling than yet another Golden Ear claim to hear differences, when it comes to such controversial areas as this. (And btw, Nordost who whoever could always say "Amir measured the wrong thing...here's the right thing to measure...and HERE are measurements demonstrating our claims. But, curiously, you don't get this usually).

    So, that expresses some of my own thinking on a claim like the one made for the expensive Ethernet cables and such.




    Yes, and everyone walks differently, but nobody can walk 50mph, and everyone sees differently, but no one can see x-rays, and in the same way everyone hears differently, but no one can hear signals at 35kHz either. We have variation, but also hard limits to our senses. And if
    some measurable distortion is below that threshold...ain't nobody hearing it. That is why humans invent measurement devices in the first place: because of our limitations we invent devices that can detect things we can not (and or more reliably than we can detect).

    Products like the one in the review promise ever lower "noise floors." As if audiophiles are blessed with hearing that has no limit...chasing that "noise floor" down until it disappears in to the background noise of the Big Bang.
    Matt, if you need a scientific explanation for everything then you are really going to limit your ability to put together a great system. Measurements simply are not capable of describing sound quality in a complete way.

    Honestly you need to try more AC cables and signal cables if you don’t hear the difference. It’s accepted that these cables do make a difference.
    Reference System:
    Continuum Audio Labs Caliburn, Lyra Etna Lambda
    dCS Rossini APEX DAC, master clock, transport
    Revox PR99 modified by Soren Wittrup, A77 Mark II tape decks
    Audio Research Ref 6SE and Ref Phono 3SE Preamplifiers
    Audio Research Ref 160 Stereo Amplifier
    Wilson Audio Alexia V in Cranberry Pearl and black hardware
    Wilson Audio LoKe subwoofer in Cranberry Pearl and black hardware x 2

  34. #34

    Re: Do better ethernet cables matter?

    Quote Originally Posted by JCS123 View Post
    Matt, you make some valid points. But audiosciencereview is Exhibit A for the case of measurements not telling the whole story. By whole story, I mean whether or not a product sounds good. (To me.)

    Shortly after learning of ASR, I looked up a few of my favorite components and guess what - they scored terribly on ASR's measurements. That was enough for me, no need to spend any more time on that site.

    Until there is a set of measurements that when taken together can reliably predict what sounds right to me and prescribe the exact components based on those measurements, I will continue to trust my ears and believe what they tell me.
    Well said.
    Reference System:
    Continuum Audio Labs Caliburn, Lyra Etna Lambda
    dCS Rossini APEX DAC, master clock, transport
    Revox PR99 modified by Soren Wittrup, A77 Mark II tape decks
    Audio Research Ref 6SE and Ref Phono 3SE Preamplifiers
    Audio Research Ref 160 Stereo Amplifier
    Wilson Audio Alexia V in Cranberry Pearl and black hardware
    Wilson Audio LoKe subwoofer in Cranberry Pearl and black hardware x 2

  35. #35
    Senior Member
    Join Date
    Apr 2014
    Location
    Southern Ontario
    Posts
    319

    Re: Do better ethernet cables matter?

    Quote Originally Posted by Lee Scoggins View Post
    Matt, if you need a scientific explanation for everything then you are really going to limit your ability to put together a great system. Measurements simply are not capable of describing sound quality in a complete way.

    Honestly you need to try more AC cables and signal cables if you don’t hear the difference. It’s accepted that these cables do make a difference.
    Matt will likely have his own response, but I'm going to say that the fundamental issue is audiophile enjoyment and the recognition that "audiophilia" is a hobby -- which hobby is often the end in itself.

    If one enjoys swapping cables listening for that elusive ultimate sound, then fine, give in to the enjoyment of the process. It doesn't really matter whether the sound differences one hears are real or imagined; only consider -- especially when the prices are going thru the roof -- that sometimes these "differences" are going to be delusional.
    ~ Bill

    Win10/Foobar2000 => Topping D90 DAC => Sonic Frontiers Line 1 SE+ preamp => VTV Purifi 1ET400A stereo amp with Sparkos SS3602 op amps => Zaph Audio ZRT speakers (DIY) + PSB Subsonic 5 subwoofer

  36. #36
    Junior Member
    Join Date
    Mar 2023
    Location
    The tube Lair
    Posts
    24

    Re: Do better ethernet cables matter?

    Of course they do/can. My Ethernet journey all started when I went from the cheap, yellow CAT5 E cable that usually comes with the gear and tried (just because I had it laying around the house) another cheap CAT8 cable at a whopping cost of $14. I hadn't even sat down in the sweet spot yet when I knew I was onto something special. Yes, the changes were that much.

    There are so many factors, considerations and configurations in play when it comes to streaming and associated upstream/system noise, that it is nearly impossible to make a blanket statement that "X" cable will definitely improve any system. It's a hit or miss. Some components/configurations and location/type of E cables will make more of a change in some systems than in others. Then there are filters within the E cables and lines that can make as much of a change (detrimental to outstanding results) as a DAC or other component within a system, but that's another story.

    __________________________________________________ __________________________________________________ _______________

    Those that rely on measurements only are a laughable crowd (to me).

    ~ Not all things that can be measured can be heard and not all things heard can be measured ~

    Measurements are overrated IMO and can't tell you how the perception of imaging is changed, it can't offer any information on height, depth or other locational cues of the reproductive effort. Measurements can't tell you how the perception of space or the size of venue is observed/perceived to the listener. They are and can be a very useful tool for those who are not intimately familiar with frequencies, nodes and the like and how they affect the end result as to what hits your ears but along my audio journey, that's it. It's a guide. A useful one but one that has its limits.

    I built my system guided by my ear, tuned it by ear, adjusted everything by ear and while I may not have achieved perfection (I never will), I damned sure have exceeded excellence.

    Nelson Pass really puts a nice focus on this with his quote -

    "Appreciation of audio is a completely subjective human experience. Measurements can provide a measure of insight, but are no substitute for human judgment. Why are we looking to reduce a subjective experience to objective criteria anyway? The subtleties of music and audio reproduction are for those who appreciate it. Differentiation by numbers is for those who do not".

    It's like the measurement crowd needs confirmation bias to prove to them that something sounds good. That's why I stated that they are a laughable crowd.

    Tom
    ~ In search of accurate reproduction of music. Real sound is my reference and while perfection may not be attainable? If I chase it, I might just catch excellence. ~

  37. #37
    Senior Member
    Join Date
    Nov 2013
    Location
    SE Pa
    Posts
    2,044

    Re: Do better ethernet cables matter?

    Quote Originally Posted by treitz3 View Post

    ~ Not all things that can be measured can be heard and not all things heard can be measured ~
    this quote always cracks me up for the second part is so patently false ...........fact, anything that can be heard CAN be measured !
    Cheers ! …. Dave

  38. #38
    Audioshark
    Join Date
    Apr 2013
    Location
    Sarasota, FL
    Posts
    30,107

    Re: Do better ethernet cables matter?

    Quote Originally Posted by Mikado463 View Post
    this quote always cracks me up for the second part is so patently false ...........fact, anything that can be heard CAN be measured !
    I would be curious if things like “tone” and soundstage depth could be measured.


    Sent from my iPhone using Tapatalk Pro
    My Systems: http://www.audioshark.org/showthread...481#post158481

    "We can hear everything we measure, but we can't measure everything we hear. Let your ears be your guide."

    Dealer for: Aqua Hi-Fi, Aurender, AudioQuest Cables & Power Products, Berkeley Audio, Block Audio (distributor), Boulder Amplifiers, Bowers & Wilkins (B&W), Bryston, Clarisys Audio Loudspeakers (distributor), Classe’ Audio, Degritter Record Cleaning Machines, Esoteric, Finite Elemente, FirstWatt, Focal Loudspeakers and Headphones, GigaFoil, Harbeth Loudspeakers, Hegel, HiFi Man, Innuos, ISO Acoustics, Keces Power Supplies, Kharma Loudspeakers and Electronics, Kuzma Turntables, Lumin, Luxman, Magico Loudspeakers, MBL Speakers & Electronics, MSB Technologies, MySonicLabs Phono Cartridges, Nordost Cables, Ortofon, Pass Labs, Quadraspire, Rega Turntables and Electronics, Shunyata Research, STAX, Stein Music Products, Stillpoints, Soulution, VAC, Vicoustics, Viva Audio, VPI Industries, WireWorld Cables.

    https://suncoastaudio.com/
    Phone: 941-932-0282
    Facebook: https://www.facebook.com/Suncoast-Au...1105178279194/

  39. #39
    Senior Member
    Join Date
    Jun 2014
    Location
    Reno, NV
    Posts
    1,679

    Re: Do better ethernet cables matter?

    Quote Originally Posted by Lee Scoggins View Post
    ...Honestly you need to try more AC cables and signal cables if you don’t hear the difference. It’s accepted that these cables do make a difference.
    This is a broad statement that is clearly an opinion; I'm fairly sure that what data is available addressing this would suggest that the overwhelming majority of people either don't agree or don't care. What I think you mean is that in the subjectively oriented audiophile community it is accepted that these cables make a difference.
    Rob
    __________________________
    Tascam BR-20; Technics 1506 with tape path upgrades, FM head, DeHavilland 222 tape head pre; Modwright Oppo 205 full tube mod w/LPS; Euphony Summus server, EtherRegen, HDPLEX LPS; MSB Discrete DAC (dual PS, ISLPro, balanced out); Pass Labs XP-12, XA60.8 (pair); Daedalus Audio Apollo 11’s, VMPS Larger Sub; Daedalus/Wywires, Acoustic Zen, Sablon Audio, Wireworld, Shunyata Research cables; Core Power Equi=Power;
    Adona rack, ​​​​​Stillpoints, IsoPods, ASC, GIK Acoustics accessories

  40. #40
    Senior Member
    Join Date
    Nov 2013
    Location
    SE Pa
    Posts
    2,044

    Re: Do better ethernet cables matter?

    Quote Originally Posted by Mike View Post
    I would be curious if things like “tone” and soundstage depth could be measured.


    Sent from my iPhone using Tapatalk Pro

    Mike, my reference was to 'measurement' and the fact that there are multiple means of doing said measurements. So if one states it can't be measured it's best to identify the means of measurement !
    Cheers ! …. Dave

  41. #41
    Senior Member
    Join Date
    Nov 2013
    Location
    SE Pa
    Posts
    2,044

    Re: Do better ethernet cables matter?

    Quote Originally Posted by rbbert View Post
    This is a broad statement that is clearly an opinion; I'm fairly sure that what data is available addressing this would suggest that the overwhelming majority of people either don't agree or don't care. What I think you mean is that in the subjectively oriented audiophile community it is accepted that these cables make a difference.
    Rob, understand the source.......
    Cheers ! …. Dave

  42. #42
    Senior Member
    Join Date
    Apr 2014
    Location
    Southern Ontario
    Posts
    319

    Re: Do better ethernet cables matter?

    Quote Originally Posted by Mike View Post
    I would be curious if things like “tone” and soundstage depth could be measured.
    Tone and soundstage perhaps can't be measured directly, however they are likely correlated with measurable attributes.

    I'm sure you'll agree that tone and soundstage depend, in the first place, on the recording usually more than on the equipment. That said, "tone" is mostly if not entirely dependent on the harmonic distortion spectral of the amplification chain. So I as I suggest in earlier in this thread 2nd/3rd order harmonic distortions -- which are measurable -- are the primary determinant of amplifier "tone".

    Soundstage is likely more complicated but will usually depend on, first, the speakers, their FR range, dispersion characteristics which affect sound reflections in the room, (please refer to Floyd Toole's work). But secondly on amplification. Many of us, (including me), believe that tube amps can sometimes create a sort of "holographic" or "layered" sense of depth which can be pleasing. However pleasant this sense of depth may be, it is probably an artifact; one well-know maker of high-end tube equipment has suggested it might come primarily from 3rd order harmonics -- harmonics are measurable and usually provided with other measurements.
    ~ Bill

    Win10/Foobar2000 => Topping D90 DAC => Sonic Frontiers Line 1 SE+ preamp => VTV Purifi 1ET400A stereo amp with Sparkos SS3602 op amps => Zaph Audio ZRT speakers (DIY) + PSB Subsonic 5 subwoofer

  43. #43
    Senior Member
    Join Date
    Oct 2022
    Location
    Texas
    Posts
    1,266

    Re: Do better ethernet cables matter?

    I honestly don't know why anyone even debates this issue on forums.

    You've got one side that is adamant because they can't hear a difference / a mid-fi system that people with better hearing / systems that can hear a difference are evil and selling snake oil or are too mentally weak and trick themselves into hearing what they want to hear. (I'm still waiting for someone to explain to me if that is the case how come sometimes when I test cables the LESS EXPENSIVE cable sounds better).

    You've got the other side that tries to engage in a debate and say it's ok if we hear different things failing to realize no matter what they say the other side will either say they are hearing things or are evil snake oil salesmen.

    Honestly it's a waste on both sides to even discuss it. If someone says they can't hear a difference and are adamant there is something wrong with me for being able to hear a difference I'm not about to engage in a discussion with them. I just let them think what they want and leave them alone. It's OK if they think that and I won't tell them they are wrong.

    At the ends of the day if you can hear a difference - great. If you can't - great. I don't care to have someone try and lecture me and I'm not about to try and help someone who can't hear the difference.

    As far as measurements - there is no medical way to measure I love my wife, but I do. So not everything in life is measurable.

    Again - thanks to Lee for posting his video and sharing what his OPINION is. EVERYTHING in this hobby is about PERSONAL OPINION and this is what makes it so great. If someone else doesn't like Lee's video or opinion then they need to accept he has a different opinion than them - and that is OK just as their opinion is OK.
    "We are all billionaires because of the huge piles sweet dough rolling in from our participation in the ongoing campaign to suck your collective brains through a stirrer-straw." - PTA Editorial Staff

  44. #44
    Senior Member
    Join Date
    Jun 2014
    Location
    Reno, NV
    Posts
    1,679

    Re: Do better ethernet cables matter?

    Quote Originally Posted by MichaelsMinute View Post
    ...At the ends of the day if you can hear a difference - great. If you can't - great. I don't care to have someone try and lecture me and I'm not about to try and help someone who can't hear the difference.
    Absolutely right, IMHO

    Quote Originally Posted by MichaelsMinute View Post
    Again - thanks to Lee for posting his video and sharing what his OPINION is. EVERYTHING in this hobby is about PERSONAL OPINION and this is what makes it so great. If someone else doesn't like Lee's video or opinion then they need to accept he has a different opinion than them - and that is OK just as their opinion is OK.
    The wording of Lee's post certainly did not sound like an opinion. FWIW, my own experience has indicated that for me, cables (AC, IC and speaker) make enough of a difference to me that I try to find the best I can afford. However, I also personally know several devoted, mostly subjective audiophiles who have not found that anything more than basic well made cables make a difference to them. My conclusion is that even in the subjective audiophile community there can be worthwhile debate about cables (not which are "best", but how much they matter to the end result).
    Rob
    __________________________
    Tascam BR-20; Technics 1506 with tape path upgrades, FM head, DeHavilland 222 tape head pre; Modwright Oppo 205 full tube mod w/LPS; Euphony Summus server, EtherRegen, HDPLEX LPS; MSB Discrete DAC (dual PS, ISLPro, balanced out); Pass Labs XP-12, XA60.8 (pair); Daedalus Audio Apollo 11’s, VMPS Larger Sub; Daedalus/Wywires, Acoustic Zen, Sablon Audio, Wireworld, Shunyata Research cables; Core Power Equi=Power;
    Adona rack, ​​​​​Stillpoints, IsoPods, ASC, GIK Acoustics accessories

  45. #45
    Senior Member
    Join Date
    Oct 2022
    Location
    Texas
    Posts
    1,266

    Re: Do better ethernet cables matter?

    Quote Originally Posted by rbbert View Post
    Absolutely right, IMHO



    The wording of Lee's post certainly did not sound like an opinion. FWIW, my own experience has indicated that for me, cables (AC, IC and speaker) make enough of a difference to me that I try to find the best I can afford. However, I also personally know several devoted, mostly subjective audiophiles who have not found that anything more than basic well made cables make a difference to them. My conclusion is that even in the subjective audiophile community there can be worthwhile debate about cables (not which are "best", but how much they matter to the end result).
    Hi Rob - we agree more than we disagree - so know that my response is NOT an argument but just filling out what I was saying.

    Even if he states it as fact - it's fact to him which is just an opinion to others. Just as you could tell me a speaker sounds bright which is fact to you but it's really only an opinion to me as we hear differently.

    I can tell you that the car I own is the best car in its segment - again I state as a fact but it is just an opinion and everyone knows that.

    I do agree with you there is no best anything in audio as again it's all opinion and regardless of what I declare is best or you declare is best it's still just an opinion and others just need to accept it.

    At the end of the day, people need to not get so bent out of shape about a hobby that is 100% purely opinion and subjective based in every way. I say that as someone who used to get into debates in forums on such topics and learned it just doesn't matter when neither side has any intention of changing their mind.

    Thanks for sharing you opinion and having a civil chat with me on it.
    "We are all billionaires because of the huge piles sweet dough rolling in from our participation in the ongoing campaign to suck your collective brains through a stirrer-straw." - PTA Editorial Staff

  46. #46
    Senior Member
    Join Date
    Jun 2014
    Location
    Reno, NV
    Posts
    1,679

    Re: Do better ethernet cables matter?

    There is a large segment of this hobby, illustrated by the presence of ASR, Audioholics, etc, for whom it is anything but subjective, and where opinions don't matter. Just sayin'
    Rob
    __________________________
    Tascam BR-20; Technics 1506 with tape path upgrades, FM head, DeHavilland 222 tape head pre; Modwright Oppo 205 full tube mod w/LPS; Euphony Summus server, EtherRegen, HDPLEX LPS; MSB Discrete DAC (dual PS, ISLPro, balanced out); Pass Labs XP-12, XA60.8 (pair); Daedalus Audio Apollo 11’s, VMPS Larger Sub; Daedalus/Wywires, Acoustic Zen, Sablon Audio, Wireworld, Shunyata Research cables; Core Power Equi=Power;
    Adona rack, ​​​​​Stillpoints, IsoPods, ASC, GIK Acoustics accessories

  47. #47
    Senior Member
    Join Date
    Oct 2022
    Location
    Texas
    Posts
    1,266

    Re: Do better ethernet cables matter?

    Quote Originally Posted by rbbert View Post
    There is a large segment of this hobby, illustrated by the presence of ASR, Audioholics, etc, for whom it is anything but subjective, and where opinions don't matter. Just sayin'
    And that's fine. Those certain people need to learn that is their opinion, and to attack others who have a different opinion and choose to use their ears is unnecessary and uncalled for. They need to learn to be respectful and tolerant of differing opinions in life and in audio.

    Ultimately those people buy based on what? How it sounds so they do use their opinion.....unless they only buy based on specs only and don't care how something sounds (which I doubt).

    Neither side is right nor wrong.
    "We are all billionaires because of the huge piles sweet dough rolling in from our participation in the ongoing campaign to suck your collective brains through a stirrer-straw." - PTA Editorial Staff

  48. #48
    Senior Member
    Join Date
    Nov 2013
    Location
    SE Pa
    Posts
    2,044

    Re: Do better ethernet cables matter?

    Quote Originally Posted by rbbert View Post
    There is a large segment of this hobby, illustrated by the presence of ASR, Audioholics, etc, for whom it is anything but subjective, and where opinions don't matter. Just sayin'
    Agreed Rob but we enter the 'grey area' where opinions and scientific fact converge and that is where the challenge of keeping things civil emerges.
    Cheers ! …. Dave

  49. #49
    Senior Member
    Join Date
    Sep 2014
    Location
    USA
    Posts
    3,381

    Re: Do better ethernet cables matter?

    Yes, they clearly do. I started with Blue Jeans Ethernet cables and upgraded several times. I landed at the Audioquest Diamond Ethernet cable. The most transparent I have listened to. I purchased them for my entire network and haven’t looked back.

    Ken
    "No summit worth climbing is easily attained."
    --------------------------------------------
    Source: MSB Select II DAC with Two Mono Powerbases and Femto 33 Clock; Renderer V2 Digital Input Module and Roon Nucleus Plus; MSB UMT V Signature Transport
    Amps: Vandersteen M7-HPA Mono Amps; MSB M204 Mono Amps
    Speakers: Vandersteen Model 7 Mk2
    Power: Two AudioQuest Niagara 5000’s with AudioQuest Dragon and Hurricane Power Cords

  50. #50
    Senior Member
    Join Date
    Apr 2013
    Location
    East Bay, CA
    Posts
    2,428

    Re: Do better ethernet cables matter?

    Quote Originally Posted by rbbert View Post
    There is a large segment of this hobby, illustrated by the presence of ASR, Audioholics, etc, for whom it is anything but subjective, and where opinions don't matter. Just sayin'
    ASR makes a "big deal" about "measurements", yet they've never conducted, nor published, a statistically valid MSA* (Measurement Systems Analysis).

    For example, what is their % Contribution of their measurement system to the overall "sums of squares" of the ANOVA†?

    You can't provide "statistical validity" (establish "legitimacy") of your measurement system, doesn't matter what the measurements are, without doing an MSA.

    And...they haven't done one.

    *-MSA: MSA | Measurement System Analysis | Quality-One

    †-MSA is based on ANOVA

Page 1 of 2 12 LastLast
AudioShark - The Best High End Audio Discussion forum.

AudioShark forum is a leading forum site for High End Audio Discussion, Stereo System Discussion, Home Theater System Discussion, Best Home Stereo System Discussion, Home Theater Installation Discussion etc.

The AudioShark forum was created for sharing the passion of high-end Audio. We have Audiophiles from all over the world participating and sharing their knowledge. From novice to experts, you will find a friendly environment for discussing about High End Audio, Stereo System, Home Theater System, Home Stereo System, Home Theater Installation, Amplifiers, Speakers, Subwoofers, Integrated System, Acoustic treatments & Digital Room Corrections and many more.

At AudioShark, we also have incorporated an exciting Marketplace where members can peruse terrific buys on used gear, as well as meet dealers and discuss the purchase of new gear.

We are as crazy about this hobby as you are! So come on in and join us! Audioshark.org the Friendliest Audio Forum!

Industry Participation Disclosure : The owner and administrator of Audioshark is the owner of Suncoast Audio LLC in Sarasota Florida. Suncoast Audio has a full brick and mortar presence in Sarasota with several great show rooms with many world class brands. More information can be found at http://www.suncoastaudio.com

Audioshark is a community of like minded individuals. Audioshark welcomes participation from all manufacturers and owners of all brands and products. It is our belief that online forums provide a community of like minded audiophiles and music lovers to encourage the growth of this wonderful hobby.

Sincerely,
The Audioshark.org Team

Do better ethernet cables matter?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •