Welcome to the AudioShark Forums.
Results 1 to 8 of 8
  1. #1
    Senior Member
    Join Date
    Mar 2014
    Location
    Atlanta, GA
    Posts
    844

    Unexpected results setting up Fyne 703s

    Once that the 703s were broken in, I figured that since the designers of my Canterburys - especially Dr. Paul Mills - had all relocated to Fyne Audio, and since they were still using reasonably efficient concentric drivers, I could save some time by simply employing my proven set-up record with the Tannoys.

    I already had located the best location for the listening seat, the Anchor Point for any set-up. It was identical to that of the Canterburys. So all I needed to do was locate the 703s where the Tannoys had been, and employ the same separation & toe-in & voila!

    Except that it didn't come close to working as I had hoped.


    Turned out that (perhaps due to the different diameters of the drivers) the Canterbury toe-in of 13.5 degrees off-axis yielded a totally unacceptable tonal balance.

    On top of that, the 83% separation that always worked with the Canterburys was off as well.

    SHEESH!!!

    So I had to abandon my Hey, this will be a piece of cake attitude and start over.

    Unfortunately, it took me a while to totally abandon my "I've got this" attitude...

    To cut a long story somewhat shorter, after totally giving up on my cocksure position, it was time to get to work.

    Cutting to the chase, I now have better overall (more musically involving) sound than I had with the Canterburys!

    To repeat a statement that I made on another thread, when set-up properly, the two top-of-the line Fynes must be magical indeed!
    DPT4ME - Dynamics, Presence & Tone for Musical Engagement; MBP (3) - stripped down for music only; Shunyata Omega & Sigma USBs; ISO REGEN w/short Curious USB links; Berkeley Alpha USB; Aqua La Scala II Optologic DAC; Schiit Yggdrasil - fully updated; Ayre Codex dac - updated; Pass Labs INT-60 integrated amp; Wyred 4 Sound STP-SE-2 preamp, Quicksilver Mono 120 amps w/Tung-Sol KT150s; Quicksilver Mid Mono amps w/Gold Lion KT77s; Fyne Audio 703s; Symposium Svelte Plus & Ultra Platforms; REL S-812 subwoofers; Duelund DCA12GA speaker cables; AV Room Service EVPs, Stein Music Harmonizers, Duelund DCA16GA & 20GA ICs; Shunyata Denali 6000S/V2; Tripp Lite PCs; Wyred 4 Sound power cords; AudioDharma cable cooker; dedicated custom room; various GIK & ASC room treatments; etc.

    www.getbettersound.com

  2. #2
    Senior Member
    Join Date
    Jul 2013
    Location
    Florida
    Posts
    3,848

    Re: Unexpected results setting up Fyne 703s when usung my proven Tannoy Canterbury system-to-room voicing technique

    I really like the Fynes. They are very musical. Glad you are happy with them Jim. Enjoy the music!
    _______________

    Mike

    Amplification: MBL 6010D, MBL 9008A Monos
    Analog: Kuzma R, Kuzma 4Point (11”), MSL Ultra Eminent EX
    Phono Pre: Pass XP-27
    Digital: Esoteric N01XD Esoteric K05
    Speakers: MBL 101E MKII
    Subwoofers: REL Carbon Specials
    Conditioner: Shunyata Triton 3
    Power Cables: Shunyata Sigma 1 & 2, Alpha 2, Delta and Venom
    ICs and SCs: Wireworld Platinum 8
    Rack: Artesania Exoteryc

  3. #3
    Super Moderator
    Join Date
    Apr 2013
    Location
    NY
    Posts
    18,726

    Re: Unexpected results setting up Fyne 703s when usung my proven Tannoy Canterbury system-to-room voicing technique

    Thank you for the update Jim. Nothing good comes easy, as you’ve demonstrated. You know how we amateurs do with speaker and system setup. No easy task and with your help, a lot more satisfying.

    Thank you for your tips and help along the way.
    Fleetwood Deville by Oswald Mills Audio, Vienna Acoustics Haydn Jubilee, Wharfedale Linton w/ stands, Klipsch RB-75, Klipsch RP-160M.

    Job INTegrated. Luxman L-595aSE

    NAD C 658 streamer.

    First Watt SIT-3, Job 250 Monos, NuForce STA200, AkitikA GT-102 amp, ASL Wave monos, Dennis Had 45 monos. Absolute Audio Labs PCF 25 amp (improved First Watt F7 super clone)

    Topping D90, RME Audio ADI-2 DAC FS, ModWright Ultimate Sony XA-5400ES.

    Burmester 948, McIntosh MCLK12, Kimber Kable, Siltech, Cardas, Avanti Audio cables.

  4. #4
    Senior Member
    Join Date
    Jan 2014
    Location
    Los Angeles
    Posts
    1,775

    Re: Unexpected results setting up Fyne 703s when usung my proven Tannoy Canterbury system-to-room voicing technique

    thanks for the feedback, Jim. I can't wait to hear the F1s at some point

    the Fynes have that tricky new port, so I'm not surprised they can't be set in the same position. Also, the drivers have those new surrounds that might impact toe-in.
    Brinkmann Bardo w/ EMT HSD-006 cart, MSB Reference DAC --> Linear Tube Audio MicroZOTL --> Ampzilla 2000, 2nd Edition --> Fyne Audio F1-12

  5. #5
    Junior Member
    Join Date
    May 2022
    Location
    can
    Posts
    21

    Re: Unexpected results setting up Fyne 703s when usung my proven Tannoy Canterbury system-to-room voicing technique

    so how easy would you say they are to set up, and was it easier than the tannoys?

  6. #6
    Junior Member
    Join Date
    Jul 2022
    Location
    Itay
    Posts
    11

    Re: Unexpected results setting up Fyne 703s

    Quote Originally Posted by Jim Smith View Post
    Cutting to the chase, I now have better overall (more musically involving) sound than I had with the Canterburys!
    Hi Jim,
    it is very promising to read what you write. In fact I am in a very similar situation, I have sold my Tannoy Canterbury GRs and I am waiting for the new F1-12s, they should arrive in September.
    If the 703s have satisfied you even more than the canterburys then my expectation goes up!

  7. #7
    Junior Member
    Join Date
    May 2022
    Location
    can
    Posts
    21

    Re: Unexpected results setting up Fyne 703s when usung my proven Tannoy Canterbury system-to-room voicing technique

    how do you find the 703's at lower volumes?
    Do they need a lot of power to sing?
    Thanks

  8. #8
    Senior Member
    Join Date
    Mar 2014
    Location
    Atlanta, GA
    Posts
    844

    Re: Unexpected results setting up Fyne 703s when usung my proven Tannoy Canterbury system-to-room voicing technique

    I have never pushed my Pass INT-60 to clipping.

    "Needing a lot of power to sing", I would say no, not with the effortless quality that is produced from the 703's 94 dB/1 watt sensitivity rating.
    DPT4ME - Dynamics, Presence & Tone for Musical Engagement; MBP (3) - stripped down for music only; Shunyata Omega & Sigma USBs; ISO REGEN w/short Curious USB links; Berkeley Alpha USB; Aqua La Scala II Optologic DAC; Schiit Yggdrasil - fully updated; Ayre Codex dac - updated; Pass Labs INT-60 integrated amp; Wyred 4 Sound STP-SE-2 preamp, Quicksilver Mono 120 amps w/Tung-Sol KT150s; Quicksilver Mid Mono amps w/Gold Lion KT77s; Fyne Audio 703s; Symposium Svelte Plus & Ultra Platforms; REL S-812 subwoofers; Duelund DCA12GA speaker cables; AV Room Service EVPs, Stein Music Harmonizers, Duelund DCA16GA & 20GA ICs; Shunyata Denali 6000S/V2; Tripp Lite PCs; Wyred 4 Sound power cords; AudioDharma cable cooker; dedicated custom room; various GIK & ASC room treatments; etc.

    www.getbettersound.com

AudioShark - The Best High End Audio Discussion forum.

AudioShark forum is a leading forum site for High End Audio Discussion, Stereo System Discussion, Home Theater System Discussion, Best Home Stereo System Discussion, Home Theater Installation Discussion etc.

The AudioShark forum was created for sharing the passion of high-end Audio. We have Audiophiles from all over the world participating and sharing their knowledge. From novice to experts, you will find a friendly environment for discussing about High End Audio, Stereo System, Home Theater System, Home Stereo System, Home Theater Installation, Amplifiers, Speakers, Subwoofers, Integrated System, Acoustic treatments & Digital Room Corrections and many more.

At AudioShark, we also have incorporated an exciting Marketplace where members can peruse terrific buys on used gear, as well as meet dealers and discuss the purchase of new gear.

We are as crazy about this hobby as you are! So come on in and join us! Audioshark.org the Friendliest Audio Forum!

Industry Participation Disclosure : The owner and administrator of Audioshark is the owner of Suncoast Audio LLC in Sarasota Florida. Suncoast Audio has a full brick and mortar presence in Sarasota with several great show rooms with many world class brands. More information can be found at http://www.suncoastaudio.com

Audioshark is a community of like minded individuals. Audioshark welcomes participation from all manufacturers and owners of all brands and products. It is our belief that online forums provide a community of like minded audiophiles and music lovers to encourage the growth of this wonderful hobby.

Sincerely,
The Audioshark.org Team

Unexpected results setting up Fyne 703s when usung my proven Tannoy Canterbury system-to-room voicing techniques

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •