Thread: Streaming makeover. Pimp my streamer?

So I’m starting to get the itch to upgrade my Roon and streaming aspect of my system.

Since 95% of my listening is now not physical media but Roon/Qobuz/Tidal, it would be worthwhile to put a bit more effort into this digital source of things.

I’m currently running Roon core on an older (7 years) but well specc’d Windows PC and am using a Bryston BDP Pi as a Roon end point that feeds my Luxman D-06 sacd/usb player/dac.

What are my options these days? Small green computer package? Roon’s own Nucleus? What else is out there?

I’m open to suggestions and appreciate the input.

Cool thanks for the link and I’ll read over it with interest. While I’m not involved with any of the computer stuff much lately, back in the day, I used to repair computers down to component level.

That was right before surface mount technology came to town, so it was if you want that hard 10MB (yikes) drive to work, better replace the IC chip on the controller board. It was a quick ride to electronic supply store while the soldering iron was warming up...

When we popped the hood on a brand new IBM and saw SMT for the first time in our lives, we knew our days as bench techs were done LOL. That was right around the time that networking was just getting stated.

Originally Posted by TheOctopus

So I’m starting to get the itch to upgrade my Roon and streaming aspect of my system.

Since 95% of my listening is now not physical media but Roon/Qobuz/Tidal, it would be worthwhile to put a bit more effort into this digital source of things.

I’m currently running Roon core on an older (7 years) but well specc’d Windows PC and am using a Bryston BDP Pi as a Roon end point that feeds my Luxman D-06 sacd/usb player/dac.

What are my options these days? Small green computer package? Roon’s own Nucleus? What else is out there?

I’m open to suggestions and appreciate the input.

You already have a PC and Roon. So Here is a fairly inexpensive path to try:
1. Install HQPlayer on your PC that you use for running Roon ( HQP has a free try-out period).
2. Connect your computer to the Luxman via USB. (You might need a driver from Luxman for this)
3. In Roon, enable HQP and choose it as your Roon End Point.

HQPlayer allows you the option of converting all your music to various versions of DSD. Like 64DSD (similar to SACD) all the way to 512DSD. Your Luxman May limit you to 64DSD max but not sure.

Depending on the capabilities of your PC you will be able to experiment with different filters.

If you decide to buy HQPlayer it will cost you about $250. Otherwise all that you are spending is your time.

And if you like what you hear, you can probably sell the Bryston and end up with money in your pocket.

Using my current computer via USB to DAC would not be an option as it is at least 20 feet away from the audio rack. The maximum recommended USB cable length is 15ft.

Originally Posted by TheOctopus

Using my current computer via USB to DAC would not be an option as it is at least 20 feet away from the audio rack. The maximum recommended USB cable length is 15ft.

You can buy an active USB cable to take care of that. Just saw a 32ft long active USB cable for less than $20 on Amazon. If you try it and you hear music without clicks, then you know that it works.

Originally Posted by Randy Myers

I agree with the HQPlayer suggestion. It really depends on budget, DIY capacity, etc. I personally love using a custom designed and modified PC to get the best for my buck. My "server" runs Roon and HQPlayer and all music is stored internally on the machine. I send all output through USB to the T+A DAC for a couple reasons. First off, T+A requires a Windows machine and USB to accept DSD512 coming from the server. With few exceptions Windows is the best way to upsample everything to DSD512 (and HQPlayer does an amazing job at this).

This configuration gives me everything that I want out of my digital setup!

Would it be "better, optimized" (don't like to use those words but..) to have Core on a straightforward NUC while keeping you custom PC config with HQP, music files, direct to DAC, thus keeping core activity off your audio PC? I think you have stated you're in the camp to avoid any network hops so to speak and this would prob go against your view, but again just curious.

Many ways to skin this for sure, just curious if you have tried this. Don't want to veer to much OT from OP's question, but think this is a valid option to consider.

Originally Posted by Swisstrips

Would it be "better, optimized" (don't like to use those words but..) to have Core on a straightforward NUC while keeping you custom PC config with HQP, music files, direct to DAC, thus keeping core activity off your audio PC? I think you have stated you're in the camp to avoid any network hops so to speak and this would prob go against your view, but again just curious.

Many ways to skin this for sure, just curious if you have tried this. Don't want to veer to much OT from OP's question, but think this is a valid option to consider.

Not sure how much, if any, would be gained by having two computers.
First, buying a NUC means an additional expense. Then you need to involve a router or a bridge to pass info between the two computers. And the Luxman capabilities limit you to DSD128 which is not very taxing for a single computer running both Roon and HQP.
HQP only needs heavy power when one is upsampling everything to DSD512 AND one is running fancy filters.

Originally Posted by brodricj

Get rid of the PC and buy a dedicated streaming box. Many choices across a wide budget spectrum.

A dedicated streaming box is just another computer. So you get rid of a computer to buy another computer?

Originally Posted by nicoff

Not sure how much, if any, would be gained by having two computers.
First, buying a NUC means an additional expense. Then you need to involve a router or a bridge to pass info between the two computers. And the Luxman capabilities limit you to DSD128 which is not very taxing for a single computer running both Roon and HQP.
HQP only needs heavy power when one is upsampling everything to DSD512 AND one is running fancy filters.

Understood, but adding another device to the network "should" be easy. I think my main point was having the Core on its own (simple) device away from the audio PC can have its benefits and I think ROON even recommends that if possible. At the end of the day it comes down to how far one wants to take it. I think some/many would agree putting everything (swiss army knife) on one device can have drawbacks. Although the Lux isn't accepting DSD512 or anything, isolating the source is a good idea IMHO and from my personal experience. Thus the optical rendus et al are nice for a multiple computer setup.

Originally Posted by TheOctopus

So I’m starting to get the itch to upgrade my Roon and streaming aspect of my system.

Since 95% of my listening is now not physical media but Roon/Qobuz/Tidal, it would be worthwhile to put a bit more effort into this digital source of things.

I’m currently running Roon core on an older (7 years) but well specc’d Windows PC and am using a Bryston BDP Pi as a Roon end point that feeds my Luxman D-06 sacd/usb player/dac.

What are my options these days? Small green computer package? Roon’s own Nucleus? What else is out there?

I’m open to suggestions and appreciate the input.

Roon Rock installed on an intel Nuc. Look at Roon site which nucs you can use. The thing is: this microcomputer is very silent, starts up in 25 seconds, shuts down almost instantly, and does not use a lot of power. When installed, a screen is not needed anymore. And most important, it sounds great.

Oh and more fun, install a small linux version instead of Roon Rock on the Nuc, like Kubuntu, install a normal Roon server on it, and it sounds the same, and then you have an extra PC as bonus.

Originally Posted by Alkyogre

Roon Rock installed on an intel Nuc. Look at Roon site which nucs you can use. The thing is: this microcomputer is very silent, starts up in 25 seconds, shuts down almost instantly, and does not use a lot of power. When installed, a screen is not needed anymore. And most important, it sounds great.

Oh and more fun, install a small linux version instead of Roon Rock on the Nuc, like Kubuntu, install a normal Roon server on it, and it sounds the same, and then you have an extra PC as bonus.

I agree that if the OP keeps his computer off and turns it on when he wants to listen to music, this would be a good improvement. But startup time aside, I am not sure this this would change the sound he hears now.

Originally Posted by nicoff

I agree that if the OP keeps his computer off and turns it on when he wants to listen to music, this would be a good improvement. But startup time aside, I am not sure this this would change the sound he hears now.

I am sorry for that misunderstanding: That it sounds great does not mean a pc does not sound great too. Like I said in another post, to my ears a Roon Rock server, an Euphony stylus, or simply Roon installed on a pc, for me they all have the same great sound. There is no difference between these 3.

What does improve the SQ is somehing else: technically I don’t understand why: that is the use of an audiophilic switch feeded by a lineair power supply with the use of an audiophilic network cable between the switch and the streamer.