P1
Welcome to the AudioShark Forums.
Results 1 to 9 of 9

Thread: P1

  1. #1
    Senior Member
    Join Date
    Apr 2013
    Posts
    649
    Post Thanks / Like

    P1

    Modularity
    • Dual Monaural (two channels in a single chassis)
    • True Monaural (one channel per chassis)

    Moving Coil Current Inputs
    • Two inputs specifically designed for low output, low resistance MC cartridges
    • Current mode for best signal to noise ratio when paired with low output MC cartridges
    • Adjustable gain
    • No impedance adjustement required in current mode, always optimal

    Moving Magnet/Moving Coil Voltage Input
    • Input specifically designed for MM, high output MC cartridges and step-up transformers
    • Ultra low noise FET-input stage
    • Adjustable gain
    • Cartridge loading variable impedance adjustement, no need to add/solder components

    EQ curves
    • RIAA and extended RIAA EQ curve factory fitted
    • High grade, tight tolerance custom components
    • Optional add-on board containing Emi, Columbia, Decca and Teldec EQ curves

    Analog Signal Path
    • Selectable high-pass subsonic filter to remove unwanted rumble
    • Selectable Mono Mode
    • Ultra low noise, high bandwidth, high slew rate design
    • Pure Class A, discrete, transistor base, fully symmetrical design

    Power Supply
    • Ultra low noise, high accuracy, discretly regulated linear power supplies
    • Oversized mains toroidal transformers
    • Shunt regulators for critical stages
    • Can be powered from the X1 External Power Supply unit

  2. #2
    Senior Member
    Join Date
    Apr 2013
    Posts
    966
    Post Thanks / Like

    P1

    Auto loading is an interesting tech feature. I am curious to understand how that works.
    Apparently CH will have the P1 in Munich. If there are any sharks there and can snap a pic of the innards and rear, i would love to see it.

  3. #3
    Senior Member
    Join Date
    Apr 2013
    Posts
    649
    Post Thanks / Like

    Re: P1


  4. #4
    Senior Member
    Join Date
    Apr 2013
    Posts
    649
    Post Thanks / Like

    Re: P1

    P1 price will be CHF 21000.

  5. Thanks VNladyaudiophile thanked for this post
  6. #5
    Member
    Join Date
    Apr 2016
    Location
    italy
    Posts
    57
    Post Thanks / Like

    Re: P1

    Dear all,
    i write from italy,
    yesterday i tried P1,one shop borrow to me,at home of one my friend VS my Kondo GE1 with trans Silvercore MC pro
    P1 was much better in every parameter that all of us was shocked.
    Image and depth much bigger,more fast and dynamic,High much open,fast and natural,and bass more controlled that Kondo

    We tried in mc1 in current mode and in mc 3 mm/mc input in voltage mode where you can select the gain from 35 to 70 db and change impedence from 20 to 100.000 ohm with step every 2 ohm.

    Really incredible
    regards
    to everybody

    Gianluigi

  7. Thanks VNladyaudiophile thanked for this post
  8. #6
    Super Moderator
    Join Date
    Apr 2013
    Location
    NY
    Posts
    17,010
    Post Thanks / Like

    Re: P1

    Gianluigi,

    Welcome to the forum. Thank you for joining.
    Joe

    Wharfedale Linton w/ stands, Avantgarde Duo XD, Klipsch RB-75, Klipsch RP-160M.

    Job INTegrated, Naim Supernait 2 w/ HiCap-DR.

    Conrad Johnson GAT2, Wyred 4 Sound STP-SE Stage 2, Misho Myronov Wooden pre.

    Misho Myronov Wooden amp, First Watt SIT-3, Job 250 Monos, Valvet E2se, NuForce STA200, AkitikA GT-102 amp, ASL Wave monos, Dennis Had 45 monos.

    Lumin U1 mini, ModWright Ultimate Sony XA-5400ES, Audio Mirror Tubadour III NOS R2R Tube Dac w/ upgrades.

    Burmester 948, McIntosh MCLK12, Kimber Kable, Siltech, Cardas, Avanti Audio cables.

  9. #7
    Senior Member
    Join Date
    Jan 2015
    Posts
    4,479
    Post Thanks / Like

    Re: P1

    Thanks for sharing your experiences Gianluigi, must be an incredible machine.

    Welcome in the shark tank -v-v-.


    Sent from my iPad using Tapatalk
    “Life’s too short to listen to bad audio.”

    Big rig: Brinkmann Taurus DD TT + 12.1 arm + Benz Micro Gullwing SLR MC + HRS M3X2/ Cardas Clear Beyond phono/ Stillpoints LPI/ Soulution 520 preamp with phono/ Synology NAS with Roon + HD Plex linear PSU + Shunyata HD/ AQ Vodka RJ45 + Aqvox Network Switch SE + AQ Diamond RJ45 into DAC/ Brinkmann Nyquist MK II/ Soulution 511/ WyWires Platinum ICs/ Semi-active Lansche Audio 4.2 LS/ Inakustik Reference LS 4004 AIR/ 2x Audioquest Thunder HD for LS/ Audioquest Niagara 5000/ Shunyata AlphaHC (x2)+Alpha+Alpha Analogue+Alpha Digital/ Finite Elemente Pagode/ Stillpoints Ultra SS.

    Small rig: Naim UnitiServe/ Curious USB/ Tidal/ Ayre Codex/ Auralic Aries Mini/ Sbooster LPSU/ Pass Labs INT-60/ Acoustic Zen Silver Reference II/ HiD Diamond 8/ Harbeth 30.2 40th Anniversary/ Shunyata Venom EU7 & Venom 3 HD.

    HP rig: MacBookAir/ Tidal/ Auralic Gemini 2000/ Sbooster LPSU/ Audeze LCD-2 Classic + WyWires Red/ Shunyata HD/ Shunyata Hydra 2/ Shunyata Venom.

  10. #8
    Member
    Join Date
    Apr 2016
    Location
    italy
    Posts
    57
    Post Thanks / Like

    Re: P1

    Thanks,
    I have L1 C1 X1 and 2 A1 in mono and i will buy P1 in future,
    I always listened since 1991 with triode tube amp like Be Yamamura,Audiotekne,Audionote,Fal,Shindo,Sakuma,Ko ndo,Dyssanayake,because for my taste i prefer them to transistor amp,but when i listen CH in one shop and then in my home i love them
    I also Have a Kondo M7 ksl,phono GE 1 and 2 Souga,sound is very very good,but at the end i prefer CH
    Regards
    Gianluigi

  11. #9
    Member
    Join Date
    Apr 2013
    Location
    Kandahar
    Posts
    30
    Post Thanks / Like

    Re: P1

    image.jpg

    image.jpg

    It's a fantastic piece. Thanks to DVL Audio, I have a P1 at home right now. I can't get enough of it!
    ____________________________
    Richard H. Mak
    Senior Analog Contributing Writer, Mono & Stereo
    Blogger, Stereopal.com

  12. Likes Mike, Artevelde liked this post