Thread: Ansuz Cables & Accessories

It’s a significant cost but I was very pleased with the Mainz8 C2 distributor. The C2 power cables were worthwhile into my DAC but seemed to make no difference to my streamer. I’d love a D2 into the distributor at some point but I certainly don’t think anything is lacking and I’m more inclined to upgrade my DAC’s power supply or go higher put the range with my speakers before spending anything else on cables.

In all honestly though, I’m perfectly happy with my system and haven’t thought about trying anything else for quite some time.

Yes, climbing the Ansuz ladder becomes both expensive and obsessive with the added SQ. I put my efforts on Mainz cables as the give the most rewards in my system even if I also have signal cables D-level. I actually started making my own signal cables based on some ideas I had (grounding and geometry)and it worked out fine achieving same levels as D. However in comparison DTC has a blacker background.

Mike

Originally Posted by Mikeoo

Yes, climbing the Ansuz ladder becomes both expensive and obsessive with the added SQ. I put my efforts on Mainz cables as the give the most rewards in my system even if I also have signal cables D-level. I actually started making my own signal cables based on some ideas I had (grounding and geometry)and it worked out fine achieving same levels as D. However in comparison DTC has a blacker background.

Mike

Interesting Mike. It has always stuck me as odd that power cables make such a big difference, but they do - at least to my ears. It seems more natural to assume that cables carrying the audio signal should be the focus of attention. Nonetheless, in the finish everything is important.

That was a good effort to achieve same levels as Ansuz D with your own cables!

Originally Posted by kiwi_1282001

Interesting Mike. It has always stuck me as odd that power cables make such a big difference, but they do - at least to my ears. It seems more natural to assume that cables carrying the audio signal should be the focus of attention. Nonetheless, in the finish everything is important.

That was a good effort to achieve same levels as Ansuz D with your own cables!

Thanks, I would say to my ears I beat the D2 cables and are at level with, albeit slightly different tone, the DTC, with exception of the DTC black background. As usual we all have different systems and ears. Anyway it took me 20 hours to finalize a stereo pair as all is built from raw materials with exception of buying Neotech naked wiring.

/Mike

Originally Posted by Mikeoo

Talking about Darkz…
After listening to the new Darkz series I still hold the DTC Darkz above even the new top dog T2s. DTC Darkz is just better at everything, under streamers, power supplies etc. So I just salvaged some more as these are out of production.

Mike

Hello,

I have bought used DTC Darkz .
They are very good under my DAC and my preamplifier.
I prefer Nordost Kone under my amplifier than DTC Darkz.
And I prefer DTC Darkz under my DAC than Nordost Kone.

Originally Posted by hongkong

Hello,

I have bought used DTC Darkz .
They are very good under my DAC and my preamplifier.
I prefer Nordost Kone under my amplifier than DTC Darkz.
And I prefer DTC Darkz under my DAC than Nordost Kone.

That's interesting.

I also own Nordost Sort Kones and Ansuz DTC Darkz.

I also had a preference for Sort Kones (TC version) under the power amplifier. The Sort Kones have an added benefit of being taller which can be useful to improve airflow under high power / high heat dissipation amps.

I use Darkz DTC pretty much everywhere else including under the music server.

In some cases (many cases in fact) i've found the Darkz results are better when resting directly on the equipment chassis and not on the existing equipment footers.

Originally Posted by Armand68

The Darkz do wonders in my system too. It is fun to experiment with them. Lately I placed one on top of my Google Nest Wifi Router and the improvement was instant and huge. Having Darkz under power supplies and power distributors/conditioners is also crucial in my experience, not restricted to Ansuz Mainz8. Also, I have Darkz under or on top of Nordost Qx4 or Add Powr Symphony Pro AC Harmonic Resonators, and the Darkz make them almost double the performence.

I haven't tried Darkz on top of Nordost QX4s. What was your observation when doing that?

Originally Posted by Armand68

In general, the same benefits as with regular components - lowered noise floor and more micro details coming through, which in sum contribute to greater musicality.

Thanks for the reply.

Out of interest, which level of Darkz did you place on top of the Nordost QX4s? How many Darkz were placed and where were they located? In the corner(s)?

Also, I note you are using Nordost QBASE. Have you tried a Ansuz Mainz 8 distributor in your system?

Hi All, long time no action from me on this forum!

Placing Darkz on top of equipment is something I have done for years now with very good effect so no surprice Ansuz launched their 'rezonator'. I even use one on top of my Kuzma arm VTA tower with profound effect. I'm using up to 4 Darkz per unit (on top) but 2 may also give a preferred effect. Of course I have all my gear placed on Darkz including loudspeakers and cables.
To further elevate these good effects try placing Darkz under these (Carbofibre > finite elemente) and equipment on top of course.

Enjoy/Mike (+60 Darkz owner)

Originally Posted by Mikeoo

Hi All, long time no action from me on this forum!

Placing Darkz on top of equipment is something I have done for years now with very good effect so no surprice Ansuz launched their 'rezonator'. I even use one on top of my Kuzma arm VTA tower with profound effect. I'm using up to 4 Darkz per unit (on top) but 2 may also give a preferred effect. Of course I have all my gear placed on Darkz including loudspeakers and cables.

To further elevate these good effects try placing Darkz under these (Carbofibre > finite elemente) and equipment on top of course.

Enjoy/Mike (+60 Darkz owner)

Great to hear from you Mike.

Wow, 60 Darkz! I thought I was doing well to have 30.

All DTC or do you have some the newer versions as well?

I'm interested in your comment on combining Ansuz Darkz footers with Finite Elemente CARBOFIBRE° isolation bases. Do you have a preference for HD or SD bases? Also, do you replace the isolation base feet or bypass them or rest them on top of Darkz?

Finally, did you compare the Finite Elemente carbon fiber-layered bases with anything else?

Hi again,

Yepp, 50 something DTC and then a bunch of C2t's. All my DTC have Tungsten Carbide balls which was a major upgrade (prefer these over the Tungsten balls). As the bulk material of (recently figured it out after 'cryptic' answer from Ansuz as they called it a composite material) the DTC is high quality brass (or low quality bronze) and not Tungsten Carbide as I was made to believe from the beginning. Anyway I am a big fan of bronze/brass so no problem and they seem to work great with the diamond-like carbon coating plus now Tungsten Carbide balls which is a killer combination.
Do not have newer top Darkz versions as my 'maximized' DTC really shines.

Also going from ZrO2 balls to Titanium made a nice difference and the big jump came with Tungsten Carbide balls. Less background, darker in between's, increased dynamic control, air, space and cracking base.

Darkz under the Finite bases but I guess all iterations including both top and bottom will yield some kind of pleasant result.

No other comparisons, but past platforms have included granite as well as 35 kg Scandinavian marble slabs (from old micro scale lab). Best at that time was the marble. Carbon fiber rules.

/Mike

Originally Posted by Mikeoo

Darkz under the Finite bases but I guess all iterations including both top and bottom will yield some kind of pleasant result.
No other comparisons, but past platforms have included granite as well as 35 kg Scandinavian marble slabs (from old micro scale lab). Best at that time was the marble. Carbon fiber rules.

/Mike

Thanks for sharing your experience Mike. If the Ansuz Rack C2T was more reasonably priced I wouldn’t hesitate to go down that route. But it’s machined from solid titanium and has a price to match!

Originally Posted by Armand68

I have a T2 on top of the Qx4, placed in center.

Have you or anyone else reading this tried the Ansuz resonator on top of components? Thoughts?

Originally Posted by Armand68

I have purchased four Ansuz Mainz8 distributors! Two for my main system, one for home cinema, and one on top of my refrigerator! (No kidding, it does a lot by removing or preventing noise going back to the meter board, even with dedicated ac lines)
The Mains8 serve as primary power distributors, the Qbases I now use only for additional power plugs, like the new Nordost QWave/Qsine or High Fidelity MC-0.5 signature plugs I have.

A Mainz8 for the refrigerator – that’s really hard core! When getting the electrician to install dedicated lines to my listening rooms I’ve insisted he install some power points at the distribution board so I could plug in some Ansuz Sparkz TC’s.

What are your thoughts on the Nordost QWave?