Any owners of the current Klipsch La Scala II speakers here? ...

[joeinid]

Please tell me what you like best about them and what amp/preamp you are using.


Frequency Response: 51Hz-17kHz +/- 4dB
SENSITIVITY: 105dB @ 1watt/1meter
POWER HANDLING: 100 w max continuous (400 w peak)
MAXIMUM ACOUSTIC OUTPUT: 121dB SPL
NOMINAL IMPEDANCE: 8 ohms
TWEETER: K-77-F 1" (2.54cm) Phenolic diaphragm compression driver
MIDRANGE: K-55-X 2" (5.08cm) Phenolic diaphragm compression driver
MID FREQUENCY HORN: Exponential Horn
WOOFER: K-33-E 15" (38.1cm) Fiber-composite cone / folded horn-loaded
CROSSOVER FREQUENCY: HF: 4500Hz
MF: 400Hz
ENCLOSURE MATERIAL: Birch Plywood and MDF
ENCLOSURE TYPE: Fully horn-loaded


http://images.klipsch.com/LaScala_II_(1)_635043080488440000_medium.jpg

[MDP]

:exciting:

I love those !!

[Hiker]

Joe, what I like about my Klipsch LaScala II speakers is the way they reproduce the natural and realistic sound of a live symphony orchestra.

A number of years ago I had the opportunity to sit on the stage while the Houston Symphony practiced. What I noticed being that close to the instruments (as opposed to being seated out in the Hall) was the real texture and explosive natural of the sound of the various instruments. I could sense the raw sound (even harshness) of the gut bow string sliding across the strings of a violin and the immediate impact of a bass drum stroke. Sound coming from horn instruments had a certain hardness and sharpness that was new to me.
All these different sounds I had not noticed previously sitting in the audience.

Every speaker designer has different goals and objectives and design methods to attract a listener. In my experience, there is nothing like a horn to capture the honest and raw sound of a live symphony orchestra. And why not, that was the intent of Paul Klipsch when he designed the Klipschorn.

In terms of solid state or tube, I could never tell any difference between my McIntosh amplifiers. And again why not, Sidney Corderman says that if properly designed, a solid state and tube amplifier should sound the same (discussed in the book). He says they both produce the same square wave.

Aside from sound, having a piece of original audio history displayed in your home is irreplaceable.

[bradleyc]

Joe.......I've had my LSII speakers for at least 5 years now and they're here to stay. Most of my audiophile disc/SACD collection is rock and blues, but these speakers do well with whatever's thown their way. I like their resolution/detail, killer dynamic range and midrange. They're bass-shy in the lower register, but still rock the Casbah with or without a sub :)

[NorthStar]

:exciting:

I love those !!

They look like serious music gospel (devotion) reproducers.

[joeinid]

Hiker, Brad,

Thank you so much for commenting. I keep coming back to the standards. I am not sure where I'll end up but I love my Cornwall III's and keep thinking about La Scalas, Klipschorns (too bad I don't have two opposite corners) and Volti Vittoras.

[joeinid]

:exciting:

I love those !!

Me too. All I need is a few watts.

[NorthStar]

Whats? ...Would ten be sufficient?

[Matt715]

I heard the Volti Vittora at Axpona last spring. They sounded great; very detailed without being fatiguing.

3947

[joeinid]

I would love the Volti Vittora.

[Cavl]

Joe,

I've had my Volti Vittoras for about a year and can say they are wonderful speakers. I've had more speakers than I care to admit, starting with various Klipsch models which I enjoyed very much. I got away from horns for a number of years in the quest to find something "better" and tried various non-horn speakers, but ultimately returned to horns with the Vittoras. I'm very glad I did.

Van

[Mike]

Van - congrats on a wonderful pair of speakers. Greg's speakers are amazing. Do you have the sub? What amps are you using? Some sweet 300B?

[joeinid]

Hi Van,

I am happy to read that. I'd love to have a pair of Vittoras.

[Cavl]

Thanks Mike. Yes, I have the matching sub. I pair the Vittoras with electronics from Raven Audio (note the equipment list below post). The monoblocks - each have a pair of the Sophia Royal Princess 300Bs - put out 20 to 25 watts. I tried several different tube and solid state amps before deciding on the Ravens. All sounded good, just liked the synergy with the Ravens more...

Van

[Mike]

Van, the Raven gear is gorgeous. Congrats.

[Zero]

My neighbor has a pair of Klipschorns, and I have a pair of RF-7 II's sitting around. :)

[joeinid]

I always wanted to hear a pair of K-horns. I had a pair of RB bookshelf speakers that were fun to listen to. Klipsch has some great speakers.


My neighbor has a pair of Klipschorns, and I have a pair of RF-7 II's sitting around. :)

[Mike]

Bump

[Katoomer]

Prior to my Orangutans I had a pair of LaScala IIs. Dynamic, detailed and able to play just about any type of music. I had them paired up with a pair of Velodyne DD10Plus subs for a real room filling experience. It was hard to part with them but they did go to a good home

[joeinid]

I've wanted LaScala II's for a long time, but have been more than satisfied with my Cornwall III's. Maybe someday :)

[socfan12]

The person I sold my Job to, I believe he has a pair of LaScala's. Think that's what the Job will be driving. He came up briefly to Bob's to pick up the amp. Nice guy. I'll ping him to see if he'll add to this thread.

[joeinid]

Job 225 and horns is a great combination! :scholar:

[wolfinwool]

I haven't hooked up the LaScala's to the Job 225 yet. I'll get to that once I receive the Job Pre2 (I received shipping confirmation today) and I finish up with the ALK crossovers in the La Scalas. I have the Job paired with tweaked Klipsch Heresy's and it immediately revealed something I was missing with the Rogue Chronus Magnums that it replaced.
Allen, thanks for breaking the Job in.

[wolfinwool]

I haven't hooked up the La Scala's to the Job 225 yet. I'll get to that once I receive the Job Pre2 (I received shipping confirmation today) and I finish up with the ALK crossovers in the La Scalas. I have the Job paired with tweaked Klipsch Heresy's and it immediately revealed something I was missing with the Rogue Chronus Magnums that it replaced.
Allen, thanks for breaking the Job in.

[wolfinwool]

Allen, thanks for warming the Job up and updating the fuse.
I haven't hooked the La Scala's up to the Job 225 just yet. I'm waiting for the Job Pre2 to arrive (I received a tracking number today) and I also still need to hook up the ALK crossovers.
Currently, I have the Job 225 with a pair of tweaked Klipsch Heresy Industrial speakers and the Job brought the room to life.
I'll post back when I get this all up and running.

[joeinid]

That's awesome! You'll love the Job on the LaScala.

[socfan12]

Allen, thanks for warming the Job up and updating the fuse.
I haven't hooked the La Scala's up to the Job 225 just yet. I'm waiting for the Job Pre2 to arrive (I received a tracking number today) and I also still need to hook up the ALK crossovers.
Currently, I have the Job 225 with a pair of tweaked Klipsch Heresy Industrial speakers and the Job brought the room to life.
I'll post back when I get this all up and running.

Haha, welcome wolfinwool! I'm so glad you joined!:celebrate008_2: I'm sure you'll like it here in the Shark Tank.:D

You know, I do have seller's remorse. :( But I am glad you are enjoying the Job - it's a FANTASTIC amp!!

[ellisr63]

I still remember when I got my first pair of La Scalas. I was playing some music pretty loud, and went around the corner to get something to drink. When I returned with a friend...he commented that there was a band playing... He was shocked when it turned out be my La Scalas!

Sent from my SM-T550 using Tapatalk

[ellisr63]

Whats? ...Would ten be sufficient?Yup, unless you want to really crank them. 10wpc will give you reference levels when watching movies.

Sent from my SM-T550 using Tapatalk