Welcome to the AudioShark Forums.
Results 1 to 5 of 5
  1. #1
    Senior Member
    Join Date
    Oct 2015
    Location
    FRANCE
    Posts
    353

    Bias for ATM-4 : easy or not ? Thanks

    Hello,

    I would know if the Bias for ATM-4 is easy or not ? Thanks.

    I have found for ATM-1, setup must be all 50 hours...

    Best regards
    Marantz SA7S1/GRIMM AUDIO CC1/MARK LEVINSON 360S+TECHNICS SL1210 MKII/ORTOFON X1-MC/VPI CLASSIC 3 in rosewood/Audio-Technica ART-9/ESOTERIC E03+TAG MC LAREN T32R+JEFF ROWLAND CORUS+JEFF ROWLAND MODEL 625+Magnepan 3.7i+Cables line: all Furutech lineflux+power cord DIY

  2. #2
    Senior Member
    Join Date
    Apr 2013
    Location
    Toronto,Ontario
    Posts
    4,978

    Re: Bias for ATM-4 : easy or not ? Thanks

    Mine is ATM3 and it's super easy to do. Just open the panel on the front and use any flat driver to adjust it. Adjust the needle in the bubble zone you are all done. Note : Make sure you turn down the volume attenuator knob while you are adjusting it.

    This is ATM4 front panel
    Paul

  3. #3
    Senior Member
    Join Date
    Oct 2015
    Location
    FRANCE
    Posts
    353

    Re: Bias for ATM-4 : easy or not ? Thanks

    Quote Originally Posted by Paul View Post
    Mine is ATM3 and it's super easy to do. Just open the panel on the front and use any flat driver to adjust it. Adjust the needle in the bubble zone you are all done. Note : Make sure you turn down the volume attenuator knob while you are adjusting it.

    This is ATM4 front panel
    Hi Paul, thank you very much. Do you come with us in Munich ? Best regards.
    I have a good price for buy two Air Tight ATM-4 but my preamplifier is with XLR and ATM-4 with RCA. So I have adapter Neutrik but I ask me if it is a good solution ?
    Your ATM-3 is with XLR or RCA ?
    Marantz SA7S1/GRIMM AUDIO CC1/MARK LEVINSON 360S+TECHNICS SL1210 MKII/ORTOFON X1-MC/VPI CLASSIC 3 in rosewood/Audio-Technica ART-9/ESOTERIC E03+TAG MC LAREN T32R+JEFF ROWLAND CORUS+JEFF ROWLAND MODEL 625+Magnepan 3.7i+Cables line: all Furutech lineflux+power cord DIY

  4. #4
    Senior Member
    Join Date
    Apr 2013
    Location
    Toronto,Ontario
    Posts
    4,978

    Re: Bias for ATM-4 : easy or not ? Thanks

    Quote Originally Posted by hongkong View Post
    Hi Paul, thank you very much. Do you come with us in Munich ? Best regards.
    I have a good price for buy two Air Tight ATM-4 but my preamplifier is with XLR and ATM-4 with RCA. So I have adapter Neutrik but I ask me if it is a good solution ?
    Your ATM-3 is with XLR or RCA ?
    I only have single end input and output. NO XLR available on mine.
    Paul

  5. #5
    Senior Member
    Join Date
    Oct 2015
    Location
    FRANCE
    Posts
    353

    Re: Bias for ATM-4 : easy or not ? Thanks

    Thank you Paul !
    Marantz SA7S1/GRIMM AUDIO CC1/MARK LEVINSON 360S+TECHNICS SL1210 MKII/ORTOFON X1-MC/VPI CLASSIC 3 in rosewood/Audio-Technica ART-9/ESOTERIC E03+TAG MC LAREN T32R+JEFF ROWLAND CORUS+JEFF ROWLAND MODEL 625+Magnepan 3.7i+Cables line: all Furutech lineflux+power cord DIY

AudioShark - The Best High End Audio Discussion forum.

AudioShark forum is a leading forum site for High End Audio Discussion, Stereo System Discussion, Home Theater System Discussion, Best Home Stereo System Discussion, Home Theater Installation Discussion etc.

The AudioShark forum was created for sharing the passion of high-end Audio. We have Audiophiles from all over the world participating and sharing their knowledge. From novice to experts, you will find a friendly environment for discussing about High End Audio, Stereo System, Home Theater System, Home Stereo System, Home Theater Installation, Amplifiers, Speakers, Subwoofers, Integrated System, Acoustic treatments & Digital Room Corrections and many more.

At AudioShark, we also have incorporated an exciting Marketplace where members can peruse terrific buys on used gear, as well as meet dealers and discuss the purchase of new gear.

We are as crazy about this hobby as you are! So come on in and join us! Audioshark.org the Friendliest Audio Forum!

Industry Participation Disclosure : The owner and administrator of Audioshark is the owner of Suncoast Audio LLC in Sarasota Florida. Suncoast Audio has a full brick and mortar presence in Sarasota with several great show rooms with many world class brands. More information can be found at http://www.suncoastaudio.com

Audioshark is a community of like minded individuals. Audioshark welcomes participation from all manufacturers and owners of all brands and products. It is our belief that online forums provide a community of like minded audiophiles and music lovers to encourage the growth of this wonderful hobby.

Sincerely,
The Audioshark.org Team

Bias for ATM-4 : easy or not ? Thanks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •